INFLUENCE OF GEOMETRICAL AND STRUCTURAL IMERFECTIONS OF STEEL PLATE GIRDERS

Dragana Turnic, Srđan Živković, Marija Spasojević Šurdilović, Marko Milošević, Aleksandra Igić

DOI Number
-
First page
171
Last page
182

Abstract


Abstract. The girders or parts of the girders are not ideally flat in terms of their geometry. The deviations that occur are defined as geometric imperfections. Also, in the material from which the girder is made, a certain deviation may occur during factory production or for some other reason, which is known as structural imperfection.  We will introduce the case of a plate girders (welded steel I girders), with and without stiffening and loaded with patch loading. The results were obtained by numerical simulation in the ANSYS for models with included geometric imperfections. The model was performed in accordance with the recommendations for different behavior curves of materials from Eurocode 3. The limit load obtained by numerical simulation corresponded to the experimental results from the literature. Stress values for girders with and without geometric imperfections for the same load value were compared.


Full Text:

PDF

References


EN 1993-1-5: 2006 Eurocode 3: Design of steel structures, Part 1-3: Plated structural elements, November 2006, ISBN 0 580 49667 8.

ENV 1993-1-1: 2005 Eurocode 3: Design of steel structures, Part 1-1: General rules for buildings.

R. Chacon, M. Bock and E. Real, "Longitudinally stiffened hybrid steel plate girders subjected to patch loading", Journal of Constructional Steel Research, Vol 67, 2011, pp 1310-1324.

A. Bergfelt, "Patch Loading on a Slender Web - Influence of Horizontal and Vertical Web Stiffeners on the Load Carrying Capacity", Publication S 79:1, Department of Structural Engineering, Division of Steel and Timber Structures, Chalmers University of Technology, Göteborg, 1979,.

C. Graciano, E. Casanova and J. Martínez, "Imperfection sensitivity of plate girder webs subjected to patch loading", Journal of Constructional Steel Research, Vol. 67, 2011, pp. 1128–1133.

P. Granath and O. Lagerqvist, "Behaviour of girder webs subjected to patch loading", Journal of Constructional Steel Research No.50., 1999, pp. 49–69.

B. Braun, "Stability of steel plates under combined loading, " Doctoral Thesis, Nr 2010-3, Institut für Konstruktion und Entwurf Stahl-Holz- und Verbundbau, Universität Stuttgart, Germany, 2010.

S. Kovačević, N. Marković, A. Ceranić and M. Bendić, "Unfavorable imperfection shapes in steel plate girders for web local crippling", Proceedings of the Annual Stability Conference Structural Stability Research Council Louisville, Kentucky, April 13-16, 2021.

B. Johansson, R. Maquoi, G. Sedlacek, C. Müller and D. Beg, "Comentary and worked examples to EN 1993-1-5, Plated structural elements", JRT Scientific and Technical Reports, 2007.

M. Clarin, "Plate Buckling Resistance - Patch Loading of Longitudinally Stiffened Webs and Local Buckling", PhD thesis, No. 2007:31, Luleå University of Technology, Department of Civil, Mining and Environmental Engineering, Division of Structural Engineering - Steel Structures, 2007.

J. Gozzi, "Patch loading resistance of plated girders - Ultimate and serviceability limit state", Doctoral Thesis 2007:30, Division of Structural Engineering – Steel Structures, Luleå University of Technology, Luleå. 2007, (ISRN: LTU-DT--07/30--SE).

N. Marković, "Izbočavanje limenih nosača pod dejstvom lokalnog opterećenja", Doktorska disertacija, Građevinski fakultet u Beogradu, 2003.

D. Turnić, N. Marković, T. Igić, V. Nikolić, M. Spasojević Šurdilović, "Analysis of material non-linearity of steel girders subjected to patch loading", Tehnički vjesnik, Vol.24. No.6, 2017, pp 1991-1998, ISSN 1330-3651.

D. Turnić, N. Marković, T. Igić: "Stress Analysis of Steel Plate Girders Subjected to Patch Loading in Elastoplastic Domain", Tehnički vjesnik, Vol.28. No.4, 2021, ISSN 1330-3651.

D. Turnić, "Nelinearno ponašanje i granična nosivost limenih nosača opterećenih lokalizovanim opterećenjem", Doktorska disertacija, Građevinsko-arhitektonski fakultet Univerziteta u Nišu, Niš, Srbija, 2016.


Refbacks

  • There are currently no refbacks.


ISSN 0354-4605 (Print)
ISSN 2406-0860 (Online)
COBISS.SR-ID 98807559