Influence of used waste cathode ray tube glass on alkali silicate reaction and mechanical properties of mortar mixtures

Jelena Bijeljic, Nenad Ristić, Zoran Grdić, Gordana Topličić-Ćurčić, Nenad Stojković

DOI Number
-
First page
437
Last page
448

Abstract


Rapid transition of electronic device manufacturing industry has led towards the increase of glass waste quantities, which are still being speculated. This resulted in increasing research on the use of waste glass in many different industries. In this study, the impact of using grounded waste cathode ray tube (CRT) glass as aggregate replacement (AR) on the alkali-silica reaction (ASR), mechanical properties and structure and microscopy of mortar were examined and reported. Crushed waste CRT aggregate was used to replace natural limestone aggregate of 0, 25, 50, 75 and 100% in mortar bars. ASR expansion values of mortar with added waste glass were investigated and tested for observation period according to Ultra-accelerated mortar-bar test. The results showed that the increase of AR percentage resulted in higher susceptibility to ASR. Mechanical properties and microscopy of mortar mixtures showed the potential of using waste CRT glass, due to the small difference between tested mixtures.

Keywords

mortar, cathode ray tube glass, alkali-silicate reaction, mechanical properties, microscopy, aggregate replacement

Full Text:

PDF

References


B. Taha and G. Nounu, “Utilizing waste recycled glass as sand/cement replacement in concrete” Journal of materials in civil engineering, vol. 21, pp. 709 -721, December 2009.

A.M.Rashad, “Recycled waste glass as fine aggregate replacement in cementitious materials based on Portland cement”, Construction and building materials, vol. 72, pp. 340-357, 2014.

G.Lee, C.S.Poon, Y.L.Wong and T.C.Ling, “Effects of recycled fine glass on the properties of dry-mixed concrete blocks”, Construction and building materials, vol. 38, pp. 638-643, 2013.

D.Romero, J.James, R.Mora and C.D.Hays, “Study on the mechanical and environmental properties of concrete containing cathode ray tube glass aggregate”, Waste management, vol. 33, pp. 1659-1666, 2013.

T.C.Ling and C.S.Poon, “Use of recycled CRT funnel glass as fine aggregate in dry-mixed concrete paving blocks”, Journal of cleaner production, vol. 68, pp. 209-215, 2014.

M.Limbachiya, M.S.Meddah and S.Fotiadou, “Performance of granulated foam glass concrete”, Construction and building materials, vol. 28, pp. 759-768, 2012.

C.Yuksel, R.S.Ahari, B.A.Sani and K.Ramyar, “Evaluation of tree test methods for determining the alkali-silica reactivity of glass aggregate”, Cement & concrete composites, vol. 38, pp. 57- 64, 2013.

V.Dima, M.Eftimie, A.Volceanov, G.Voicu and R.Dinca, “Possibilities for recovery of some glass waste from cathode ray tubes, Romanian Journal of Materials”, vol. 42(1), pp.76-81, January 2012.

N.Swamy, The alkali-silica reaction in concrete, University of Sheffield, Department of the mechanical and process engineering, University of Sheffield, 1992.

P.J.M.Monteiro, K.Wang, G.Sposito, M.C.Santos and W.P.Andrade, “Influence of mineral admixtures on the alkali-aggregate reaction”, Cement and concrete research, vol. 27, pp. 1899-1909, 1997.

A.M.Moncea, M.Georgescu, A.Badanoiu and E.Matei, “Immobilization of waste glass with high lead content in different binding matrices”, Romanian Journal of Materials, 2012, vol. 42(2), pp. 152-163, 2012.

T.C.Ling and C.S.Poon, “Effects of particle size of treated CRT funnel glass on the properties of cement mortar”, Materials and structures, vol. 46, pp. 25-34, 2013.

N.Lairaksa and T.Moon, “Use of CRT funnel glass as a fine aggregate in self-compacting mortar: the effect of limestone on Pb immobilization”, Applied mechanics and materials, vol. 193-194, pp. 513-, 2012.

H. Du and K.H.Tan, “Use of waste glass as sand in mortar: Part II – Alkali-silica reaction”, Cement & concrete composites, vol. 35, pp. 118-126, 2013.

J.Lindgarh, P.Nixon, I.Borchers, B.Schouenborg, B.J.Wiggum, M.Haugen and U.Akesson, “The EU “PARTNER” Project – European standard tests to prevent alkali reaction in aggregates: Final results and recommendations”, Cement and concrete research, vol. 40, pp. 611-635, April 2010.

Rilem TC 106-AAR: Alkali-aggregate reaction, Materials and structures, vol. 33, pp. 283-293, June 2000.

D.Grdić, N.Ristić, G.T.Ćurčić, M.Protić and S.Marinković, “Impact of replacement of natural aggregate with recycled glass obtained from cathode”, Society for materials and structures testing of Serbia, pp. 79-88, 2014.

G.T.Ćurčić, V.Mitić, D.Grdić and M.Miljković, “Alkali-Aggregate Reactions in Concrete”, Proceedings of the III Advanced Ceramics and Applications Conference, pp. 361-383, 2016.

Y.Xin, T.Zhong, S.Tian-Yi and P.Zhu, “Performance of concrete made with steel slag and waste glass”, Construction and Building Materials, vol. 114, pp. 737-746, 2016.

S.K.Kaliyavaradhan, K.Baskar, “Response surfaces for fresh and hardened properties of concrete with E-Waste”, Journal of waste management, vol. 2014 , pp. 1-14, 2014.

T.Michael, “The effect of supplementary cementing materials on alkali-silica reaction: A review”, Cement and concrete research, vol. 41, pp. 1224-1231, 2011.

J.Lindgĺrd, Ö.A.Çakır, I.Fernandes, F. Rřnning and M.D.A.Thomas, “Alkali–silica reactions (ASR): Literature review on parameters influencing laboratory performance testing”, Cement and concrete research, vol. 42, pp. 223-243, 2012.

EN 206–1 Concrete—Part 1: Specification, performance, production and conformity, 2001

SRPS EN 197-1:2013 Cement – Deo 1: Sastav, specifikacije i kriterijumi usaglašenosti za obične cemente, Institut za standardizaciju Srbije, 2013

ASTM C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

T.Ming-shu, H.Su-fen and Z.Shi-hua, “Rapid method for identification of alkali reactivity of aggregate”, Cement and concrete research, vol. 13, pp. 417-422, 1983.

M.A.G.Duncan, J.E.Gillott and E.G.Swenson, “Alkali-aggregate reaction in Nova Scotia III. Field and petrographic studies”, Cement and concrete research, 1973, vol. 3, pp. 233-245, 1973.

ISO 6274


Refbacks

  • There are currently no refbacks.


ISSN 0354-4605 (Print)
ISSN 2406-0860 (Online)
COBISS.SR-ID 98807559