SHORT-CIRCUIT ROBUSTNESS ASSESSMENT IN POWER ELECTRONIC MODULES FOR MEGAWATT APPLICATIONS

Francesco Iannuzzo

DOI Number
10.2298/FUEE1601035I
First page
35
Last page
47

Abstract


In this paper, threats and opportunities in testing of megawatt power electronic modules under short circuit are presented and discussed, together with the introduction of some basic principles of non-destructive testing, a key technique to allow post-failure analysis. The non-destructive testing equipment at CORPE, center of reliable power electronics, Aalborg University, Denmark, is presented and its features are discussed in detail, together with some relevant results. Limitations of experimental analysis have also been addressed, together with the introduction of a mixed thermal-electrical simulation tool originally developed to study abnormal conditions and helping to predict very fast and dangerous thermal transient especially in case of worn out devices. The paper is concluded with an overview on present challenges in next-generation semiconductors for such high power ranges – basically silicon carbide – and new concepts for non-destructive testing of ultrafast power modules adopting such a technology.


Keywords

IGBT, robustness, reliability, short circuit, instabilities, SiC power modules

Full Text:

PDF

References


H. Wang, M. Liserre, and F. Blaabjerg, “Toward Reliable Power Electronics: Challenges, Design Tools, and Opportunities,” IEEE Ind. Electron. Mag., vol. 7, no. 2, pp. 17–26, Jun. 2013.

M. Wilkinson, “ReliaWind, report on wind turbine reliability profiles – field data reliability analysis, 2011.” European Commission FP7, 2009.

F. Iannuzzo, C. Abbate, and G. Busatto, “Instabilities in Silicon Power Devices: A Review of Failure Mechanisms in Modern Power Devices,” IEEE Ind. Electron. Mag., vol. 8, no. 3, pp. 28–39, Sep. 2014.

G. Busatto, B. Cascone, L. Fratelli, M. Balsamo, F. Iannuzzo, and F. Velardi, “Non-destructive high temperature characterisation of high-voltage IGBTs,” Microelectron. Reliab., vol. 42, no. 9–11, pp. 1635–1640, 2002.

“Infineon GmbH,” Infineon GmbH. [Online]. Available: http://www.infineon.com.

“Mentor Graphics®.” [Online]. Available: http://www.mentor.com.

R. Wu, P. Diaz Reigosa, F. Iannuzzo, L. Smirnova, H. Wang, and F. Blaabjerg, “Study on Oscillations During Short Circuit of MW-Scale IGBT Power Modules by Means of a 6-kA/1.1-kV Nondestructive Testing System,” IEEE J. Emerg. Sel. Top. Power Electron., vol. 3, no. 3, pp. 756–765, Sep. 2015.

C. Abbate, G. Busatto, and F. Iannuzzo, “IGBT RBSOA non-destructive testing methods: Analysis and discussion,” Microelectron. Reliab., vol. 50, no. 9–11, pp. 1731–1737, 2010.

P. D. Reigosa, R. Wu, F. Iannuzzo, and F. Blaabjerg, “Robustness of MW-Level IGBT modules against gate oscillations under short circuit events,” Microelectron. Reliab., Jul. 2015.

V. Székely, A. Poppe, M. Rencz, A. Csendes, and A. Páhi, “Electro-thermal simulation: a realization by simultaneous iteration,” Microelectron. J., vol. 28, no. 3, pp. 247–262, Mar. 1997.

M. Riccio, M. Carli, L. Rossi, A. Irace, G. Breglio, and P. Spirito, “Compact electro-thermal modeling and simulation of large area multicellular Trench-IGBT,” 2010, pp. 379–382.

A. Raciti, D. Cristaldi, G. Greco, G. Vinci, and G. Bazzano, “Electro-Thermal PSpice Modeling and Simulation of Power Modules,” IEEE Trans. Ind. Electron., pp. 1–1, 2015.

A. Bonsbaine, G. Trigkidis, and N. Benamrouche, “An integrated electro-thermal model of IGBT devices (experimental validation),” in Universities Power Engineering Conference (UPEC), 2009 Proceedings of the 44th International, 2009, pp. 1–5.

A. Bryant, N.-A. Parker-Allotey, D. Hamilton, I. Swan, P. Mawby, T. Ueta, T. Nishijima, and K. Hamada, “A Fast Loss and Temperature Simulation Method for Power Converters, Part I: Electrothermal Modeling and Validation,” IEEE Trans. Power Electron., vol. 27, no. 1, pp. 248–257, Jan. 2012.

A. Castellazzi, E. Batista, M. Ciappa, J.-M. Dienot, M. Mermet-Guyennet, and W. Fichtner, “Full electro-thermal model of a 6.5kV field-stop IGBT module,” in IEEE Power Electronics Specialists Conference, 2008. PESC 2008, 2008, pp. 392–397.

K. El boubkari, S. Azzopardi, L. Theolier, J. Y. Deletage, and E. Woirgard, “2D finite elements electro-thermal modeling for IGBT: Uni and multicellular approach,” in 2012 13th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), 2012, pp. 1/5–5/5.

R. Wu, F. Iannuzzo, H. Wang, and F. Blaabjerg, “An Icepak-PSpice co-simulation method to study the impact of bond wires fatigue on the current and temperature distribution of IGBT modules under short-circuit,” 2014, pp. 5502–5509.

“ANSYS® Icepak, Release 15.0, User Analysis Guide, ANSYS, Inc.” .

“OrCADTM,” OrCADTM PSpice®. [Online]. Available: http://www.orcad.com.

F. Iannuzzo and G. Busatto, “Physical CAD Model for High-Voltage IGBTs Based on Lumped-Charge Approach,” IEEE Trans. Power Electron., vol. 19, no. 4, pp. 885–893, Jul. 2004.

M. Ciappa, “Selected failure mechanisms of modern power modules,” Microelectron. Reliab., vol. 42, no. 4–5, pp. 653–667, Apr. 2002.

C. Abbate, G. Busatto, and F. Iannuzzo, “Operation of SiC normally-off JFET at the edges of its safe operating area,” Microelectron. Reliab., vol. 51, no. 9–11, pp. 1767–1772, 2011.

M. Berkani, S. Lefebvre, and Z. Khatir, “Saturation current and on-resistance correlation during repetitive short-circuit conditions on SiC JFET transistors,” IEEE Trans. Power Electron., vol. 28, no. 2, pp. 621–624, 2013.

X. Huang, G. Wang, Y. Li, A. Q. Huang, and B. J. Baliga, “Short-circuit capability of 1200V SiC MOSFET and JFET for fault protection,” presented at the Conference Proceedings - IEEE Applied Power Electronics Conference and Exposition - APEC, 2013, pp. 197–200.

A. Castellazzi, A. Fayyaz, L. Yang, M. Riccio, and A. Irace, “Short-circuit robustness of SiC Power MOSFETs: Experimental analysis,” presented at the Proceedings of the International Symposium on Power Semiconductor Devices and ICs, 2014, pp. 71–74.

Z. Chen, Y. Yao, M. Danilovic, and D. Boroyevich, “Performance evaluation of SiC power MOSFETs for high-temperature applications,” in Power Electronics and Motion Control Conference (EPE/PEMC), 2012 15th International, 2012, pp. DS1a.8–1–DS1a.8–9.

T. Shoji, A. Soeno, H. Toguchi, S. Aoi, Y. Watanabe, and H. Tadano, “Theoretical analysis of short-circuit capability of SiC power MOSFETs,” Jpn. J. Appl. Phys., vol. 54, no. 4, 2015.

L. Smirnova, J. Pyrhonen, F. Iannuzzo, Rui Wu, and F. Blaabjerg, “Round busbar concept for 30 nH, 1.7 kV, 10 kA IGBT non-destructive short-circuit tester,” 2014, pp. 1–9.

“ANSYS® Q3D Extractor, ANSYS Inc.,” ANSYS Q3D Extractor. [Online]. Available: http://www.ansys.com/Products/Simulation+Technology/Electronics/Signal+Integrity/ANSYS+Q3D+Extractor.


Refbacks

  • There are currently no refbacks.


ISSN: 0353-3670 (Print)

ISSN: 2217-5997 (Online)

COBISS.SR-ID 12826626