HIGH-BANDWIDTH BUFFER AMPLIFIER FOR LIQUID CRYSTAL DISPLAY APPLICATIONS

Saeed Sadoni, Abdalhossein Rezai

DOI Number
10.2298/FUEE1704549S
First page
549
Last page
556

Abstract


In this paper, a novel high-bandwidth and low-power buffer amplifier is presented for the liquid crystal display applications. This buffer amplifier consists of a folded cascade differential amplifier in the input and a class-AB amplifier in the output, which are designed carefully. The proposed buffer amplifier utilizes a high-performance feedback circuit to increase the bandwidth. It also utilizes a comparator circuit to avoid wasting power. The designed circuit has been simulated in 180nm technology using HSPICE 2008.3. The simulation results show that the bandwidth, power consumption and power supply of the designed circuit are 1.14MHz, 1.64mW and 1.8V, respectively.

Keywords

buffer amplifier, liquid crystal displays, low-power amplifier, high-bandwidth amplifier

Full Text:

PDF

References


A. Nikolic, N. Neskovic, R. Antic, A. Anastasijevic, “Industrial wireless sensor networks as a tool for remote on-line management of power transformers heating and cooling process”, Facta Universitatis, Series: Electronics and Energetics. vol. 30, pp. 107-119, 2017.

R. Khalilian, A. Rezai, E. Abedini, “An efficient method to improve WBAN security”, Adv. Sci. Tech. Let., vol. 64, pp. 43-46, 2014.

H. M. Obaid, S. M. Chaudhry, “Design of linear high drive class AB differential amplifier in 90 nMOS technology”, Natl. Acad. Sci. Lett, vol. 38, pp. 489–492, 2015.

S. Soltany, A. Rezai, “A novel low power and low voltage bulk-input four-quadrant analog multiplier in voltage mode”, Int. J. Multi. Ubiq. Eng., 2016, 16, pp. 159-168.

S. Soltany, A. Rezai, “A new low power four quadrant analog multiplier”, Adv. Sci. Tech. Let., , vol. 106, pp. 33-36, 2015.

C. W. Lu, C. L. Lee, “A low-power high speed class-AB buffer amplifier for flat panel display application”, IEEE Trans. Very Large Integ. (VLSI) Syst., vol. 10, pp. 163-168, 2002.

G. Grasso, S. Pennisi, “High drive and linear CMOS class AB pseudo-differential amplifier”, IEEE Trans. Cir. Syst.: Expree Brifes, vol. 54, pp. 112-116, 2007.

P. R. Surkanti, P. M. Furth, “Converting a three stage pseudo-class AB amplifier to a true class AB amplifier”, IEEE Trans. Cir. Syst.: Expree Brifes, vol. 59, pp. 229-233, 2012.

P. Liao, P. Leo, B. Zhang, Zh. Li, “Single capacitor with current amplifier compensation for ultra large capacitive load three stage amplifier”, Microelectr. J., vol. 44, pp. 712-717, 2013.

A. D. Grasso, D. Marano, F. E. Alfaro, A. Martin, G. Palumbo, S. Pennisi, “Self-biased dual path push pull output buffer amplifier for LCD column drivers”, IEEE Trans. Cir. Syst.: Regular Papers, vol. 61, pp. 663-670, 2014.

F. Silveira, D. Flandre, P. Jespers, “A gm/Id based methodology for the design of CMOS analog circuits and its application to the synthesis of a silicon on insulator micro power OTA”, IEEE J. Solid State Cir., vol. 31 , pp. 1314-1319, 1996.


Refbacks

  • There are currently no refbacks.


ISSN: 0353-3670