Babak Safaei, Emmanuel Chukwueloka Onyibo, Dogus Hurdoganoglu

DOI Number
First page
Last page


The bending and critical buckling loads of a sandwich beam structure subjected to thermal load and axial compression were simulated and temperature distribution across sandwich layers was investigated by finite element analysis and validated analytically. The sandwich structure was consisted of two face sheets and a core, carbon fiber and carbon foam were used as face sheet and core respectively for more efficient stiffness results. The analysis was repeated with different materials to reduce thermal strain and heat flux of sandwich beams. Applying both ends fixed as temperature boundary conditions, temperature induced stresses were observed, steady-state thermal analysis was performed, and conduction through sandwich layers along with their deformation nature were investigated based on the material properties of the combination of face sheets and core. The best material combination was found for the reduction of heat flux and thermal strain, and addition of aerogel material significantly reduced thermal stresses without adding weight to the sandwich structure.


Sandwich beam, Heat flux, Buckling, Total deformation, Finite element analysis

Full Text:



Darzi, S., Karampour, H., Bailleres, H., Gilbert, B.P., Fernando, D., 2020, Load bearing sandwich timber walls with plywood faces and bamboo core, Structures, 27, pp. 2437–2450.

Gay, D., Suong, V., 2003, HOA a Stephen W. TSAI, Composite materials: design and applications, doi: 10.1201/9781420031683

Ashby, M.F., Cebon, D., 1993, Materials selection in mechanical design, Le Journal de Physique IV, 3(C7), pp. C7-1.

Gibson, L.J., 2003, Cellular solids, Mrs Bulletin, 28(4), pp. 270–274.

Douville, M.A., Le Grognec, P., 2013, Exact analytical solutions for the local and global buckling of sandwich beam-columns under various loadings, International Journal of Solids and Structures, 50(16–17), pp. 2597–2609.

Zhang, F., Liu, W., Ling, Z., Fang, H., Jin, D., 2018, Mechanical performance of GFRP-profiled steel sheeting composite sandwich beams in four-point bending, Composite Structures, 206, pp. 921–932.

Sohel, K.M.A., Richard Liew, J.Y., 2011, Steel–Concrete–Steel sandwich slabs with lightweight core — Static performance, Engineering Structures, 33(3), pp. 981–992.

Reyes, G., 2008, Static and low velocity impact behavior of composite sandwich panels with an aluminum foam core, Journal of Composite Materials, 42(16), pp. 1659–1670.

Mamalis, A.G., Spentzas, K.N., Manolakos, D.E., Ioannidis, M.B., Papapostolou, D.P., 2008, Experimental investigation of the collapse modes and the main crushing characteristics of composite sandwich panels subjected to flexural loading, International Journal of Crashworthiness, 13(4), pp. 349–362.

Crupi, V., Epasto, G., Guglielmino, E., 2012, Collapse modes in aluminium honeycomb sandwich panels under bending and impact loading, International Journal of Impact Engineering, 43, pp. 6–15.

Correia, J.R., Garrido, M., Gonilha, J.A., Branco, F.A., Reis, L.G., 2012, GFRP sandwich panels with PU foam and PP honeycomb cores for civil engineering structural applications: Effects of introducing strengthening ribs, International journal of structural integrity, 3(2) pp. 127–147.

Qin, Y., Kang, R., Sun, J., Wang, Y., Zhu, X., Dong, Z., 2022, A fast self-calibration method of line laser sensors for on-machine measurement of honeycomb cores, Optics and Lasers in Engineering, 152, 106981.

Davalos, J.F., Qiao, P., Frank Xu, X., Robinson, J., Barth, K.E., 2001, Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications, Composite Structures, 52(3), pp. 441–452.

Camata, G., Shing, P.B., 2010, Static and fatigue load performance of a gfrp honeycomb bridge deck, Composites Part B: Engineering, 41(4), pp. 299–307.

Sorohan, Ş., Sandu, M., Sandu, A., Constantinescu, D.M., 2016, Finite Element Models Used to Determine the Equivalent In-plane Properties of Honeycombs, Materials Today: Proceedings, 3(4), pp. 1161–1166.

Kalaprasad, G., Pradeep, P., Mathew, G., Pavithran, C., Thomas, S., 2000, Thermal conductivity and thermal diffusivity analyses of low-density polyethylene composites reinforced with sisal, glass and intimately mixed sisal/glass fibres, Composites Science and Technology, 60(16), pp. 2967–2977.

Sahraoui, S., Mariez, E., Etchessahar, M., 2000, Mechanical testing of polymeric foams at low frequency, Polymer Testing, 20(1), pp. 93–96.

Quintana, J.M., Mower, T.M., 2017, Thermomechanical behavior of sandwich panels with graphitic-foam cores, Materials & Design, 135, pp. 411–422.

Subedi, N.K., Coyle, N.R., 2002, Improving the strength of fully composite steel-concrete-steel beam elements by increased surface roughness—an experimental study, Engineering Structures, 24(10), pp. 1349–1355.

Subedi, N.K., 2003, Double skin steel/concrete composite beam elements: experimental testing, Structural Engineer, 81(21), pp. 30–35.

Daniel, I.M., Abot, J.L., 2000, Fabrication, testing and analysis of composite sandwich beams, Composites Science and Technology, 60(12–13), pp. 2455–2463.

Vaikhanski, L., Nutt, S.R., 2003, Fiber-reinforced composite foam from expandable PVC microspheres, Composites Part A: Applied Science and Manufacturing, 34(12), pp. 1245–1253.

Hadi, B.K., Matthews, F.L., 2000, Development of Benson–Mayers theory on the wrinkling of anisotropic sandwich panels, Composite Structures, 49(4), pp. 425–434.

Gdoutos, E.E., Daniel, I.M., Wang, K.-A., 2003, Compression facing wrinkling of composite sandwich structures, Mechanics of Materials, 35(3), pp. 511–522.

Jiang, W., Liu, Y., 2017, Indentation of rigidly supported sandwich beams with core gradation, International Journal of Mechanical Sciences, 134, pp. 182–188.

Li, Z., Chen, X., Jiang, B., Lu, F., 2016, Local indentation of aluminum foam core sandwich beams at elevated temperatures, Composite Structures, 145, pp. 142–148.

Ha, G.X., Marinkovic, D., Zehn, M.W., 2019, Parametric investigations of mechanical properties of nap-core sandwich composites, Composites Part B: Engineering, 161, pp. 427–438.

McCormack, T.M., Miller, R., Kesler, O., Gibson, L.J., 2001, Failure of sandwich beams with metallic foam cores, International Journal of Solids and Structures, 38(28), pp. 4901–4920.

Ha, G.X., Zehn, M.W., Marinkovic, D., Fragassa, C., 2019, Dealing with Nap-Core Sandwich Composites: How to Predict the Effect of Symmetry, Materials, 12(6), 874.

Fu, J.W., Akbarzadeh, A.H., Chen, Z.T., Qian, L.F., Pasini, D., 2016, Non-Fourier heat conduction in a sandwich panel with a cracked foam core, International Journal of Thermal Sciences, 102, pp. 263–273.

Mehar, K., Kumar Panda, S., 2018, Thermal free vibration behavior of FG-CNT reinforced sandwich curved panel using finite element method, Polymer Composites, 39(8), pp. 2751–2764.

Sun, S., Sheng, Y., Feng, S., Jian Lu, T., 2021, Heat transfer efficiency of hierarchical corrugated sandwich panels, Composite Structures, 272, 114195.

Onyibo, E.C., Safaei, B., 2022, Application of finite element analysis to honeycomb sandwich structures: a review, Reports in Mechanical Engineering, 3(1), pp. 283–300.

Su, B., Chen, J., Hao, J., Fan, X., Han, X., 2020, Thermal insulation performance of GFRP squared tube reinforced sandwich panel, Energy and Buildings, 211, 109790.

Moradi-Dastjerdi, R., Behdinan, K., 2021, Temperature effect on free vibration response of a smart multifunctional sandwich plate, Journal of Sandwich Structures and Materials, 23(6), pp. 2399–2421.

Zhang, L., Zhang, F., Qin, Z., Han, Q., Wang, T., Chu, F., 2022, Piezoelectric energy harvester for rolling bearings with capability of self-powered condition monitoring, Energy, 238, 121770.

Zhao, W., Liu, Z., Yu, G., Wu, L., 2021, A new multifunctional carbon fiber honeycomb sandwich structure with excellent mechanical and thermal performances, Composite Structures, 274, 114306.

Safaei, B., Naseradinmousavi, P., Rahmani, A., 2016, Development of an accurate molecular mechanics model for buckling behavior of multi-walled carbon nanotubes under axial compression, Journal of Molecular Graphics and Modelling, 65, pp. 43–60.

Chen, Y., Zhang, L., He, C., He, R., Xu, B., Li, Y., 2021, Thermal insulation performance and heat transfer mechanism of C/SiC corrugated lattice core sandwich panel, Aerospace Science and Technology, 111, 106539.

Safaei, B., Moradi-Dastjerdi, R., Behdinan, K., Qin, Z., Chu, F., 2019, Thermoelastic behavior of sandwich plates with porous polymeric core and CNT clusters/polymer nanocomposite layers, Composite Structures, 226, 111209.

Asmael, M., Safaei, B., Zeeshan, Q., Zargar, O., Nuhu, A.A., 2021, Ultrasonic machining of carbon fiber–reinforced plastic composites: a review, International Journal of Advanced Manufacturing Technology, 113(11–12), pp. 3079-3120.

Safaei, B., 2021, Frequency-dependent damped vibrations of multifunctional foam plates sandwiched and integrated by composite faces, European Physical Journal Plus, 136(6), 646

Liu, Y., Qin, Z., Chu, F., 2021, Nonlinear forced vibrations of FGM sandwich cylindrical shells with porosities on an elastic substrate, Nonlinear Dynamics, 104(2), pp. 1007–1021.

Hadji, L., Avcar, M., 2021, Free Vibration Analysis of FG Porous Sandwich Plates under‎ Various Boundary Conditions, Journal of Applied and Computational Mechanics, 7(2), pp. 505–519.

Li, H., Lv, H., Sun, H., Qin, Z., Xiong, J., Han, Q., Liu, J., Wang, X., 2021, Nonlinear vibrations of fiber-reinforced composite cylindrical shells with bolt loosening boundary conditions, Journal of Sound and Vibration, 496, 115935.

Liu, Y., Qin, Z., Chu, F., 2021, Nonlinear forced vibrations of functionally graded piezoelectric cylindrical shells under electric-thermo-mechanical loads, International Journal of Mechanical Sciences, 201, 106474.

Sahmani, S., Aghdam, M.M., 2018, Nonlinear primary resonance of micro/nano-beams made of nanoporous biomaterials incorporating nonlocality and strain gradient size dependency, Results in Physics, 8, pp. 879–892.

Azizi, S., Safaei, B., Fattahi, A.M., Tekere, M., 2015, Nonlinear vibrational analysis of nanobeams embedded in an elastic medium including surface stress effects, Advances in Materials Science and Engineering, 2015, pp. 1-7

Li, H., Li, Z., Safaei, B., Rong, W., Wang, W., Qin, Z., Xiong, J., 2021, Nonlinear vibration analysis of fiber metal laminated plates with multiple viscoelastic layers. Thin-Walled Structures, 168, 108297

Li, Q., Xie, B., Sahmani, S., Safaei, B., 2020, Surface stress effect on the nonlinear free vibrations of functionally graded composite nanoshells in the presence of modal interaction, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(5), pp. 1–18.

Sahmani, S., Fattahi, A.M., Ahmed, N.A., 2020, Surface elastic shell model for nonlinear primary resonant dynamics of FG porous nanoshells incorporating modal interactions, International Journal of Mechanical Sciences, 165, 105203.

Safaei, B., Fattahi, A.M., 2017, Free vibrational response of single-layered graphene sheets embedded in an elastic matrix using different nonlocal plate models, Mechanika, 23(5), pp. 678–687.

Yi, H., Sahmani, S., Safaei, B., 2020, On size-dependent large-amplitude free oscillations of FGPM nanoshells incorporating vibrational mode interactions, Archives of Civil and Mechanical Engineering, 20(2), pp. 1–23.

Xie, B., Sahmani, S., Safaei, B., Xu, B., 2021, Nonlinear secondary resonance of FG porous silicon nanobeams under periodic hard excitations based on surface elasticity theory, Engineering with Computers, 37(2), pp. 1611–1634.

Sahmani, S., Bahrami, M., Aghdam, M.M., Ansari, R., 2014, Surface effects on the nonlinear forced vibration response of third-order shear deformable nanobeams, Composite Structures, 118(1), pp. 149–158.

Yang, Z., Zhao, S., Yang, J., Lv, J., Liu, A., Fu, J., 2021, In-plane and out-of-plane free vibrations of functionally graded composite arches with graphene reinforcements, Mechanics of Advanced Materials and Structures, 28(19), pp. 2046–2056

Katariya, P. V., Panda, S.K., Mahapatra, T.R., 2018, Bending and vibration analysis of skew sandwich plate, Aircraft Engineering and Aerospace Technology, 90(6), pp. 885–895.

Liu, Y., Qin, Z., Chu, F., 2022, Investigation of magneto-electro-thermo-mechanical loads on nonlinear forced vibrations of composite cylindrical shells, Communications in Nonlinear Science and Numerical Simulation, 107, 106146.

Moradi-Dastjerdi, R., Behdinan, K., 2021, Free vibration response of smart sandwich plates with porous CNT-reinforced and piezoelectric layers, Applied Mathematical Modelling, 96, pp. 66–79.

Bažant, Z.P., Beghini, A., 2004, Sandwich buckling formulas and applicability of standard computational algorithm for finite strain, Composites Part B: Engineering, 35(6–8), pp. 573–581.

Wang, D., Abdalla, M.M., 2015, Global and local buckling analysis of grid-stiffened composite panels, Composite Structures, 119, pp. 767–776.

Hu, H., Belouettar, S., Potier-Ferry, M., Makradi, A., 2009, A novel finite element for global and local buckling analysis of sandwich beams, Composite Structures, 90(3), pp. 270–278.

Zhao, T., Yu, F., 2020, Critical upheaval buckling forces of sandwich pipelines with variable stiffnesses of pipe material, Ocean Engineering, 217, 107547.

Alhijazi, M., Safaei, B., Zeeshan, Q., Asmael, M., 2021, Modeling and simulation of the elastic properties of natural fiber-reinforced thermosets, Polymer Composites, 42(7), pp. 3508–3517.

Fan, F., Cai, X., Sahmani, S., Safaei, B., 2021, Isogeometric thermal postbuckling analysis of porous FGM quasi-3D nanoplates having cutouts with different shapes based upon surface stress elasticity, Composite Structures, 262, 113604.

Grygorowicz, M., Magnucki, K., Malinowski, M., 2015, Elastic buckling of a sandwich beam with variable mechanical properties of the core, Thin-Walled Structures, 87, pp. 127–132.

Ansari, R., Gholami, R., Shojaei, M.F., Mohammadi, V., Sahmani, S., 2014, Surface stress effect on the pull-in instability of circular nanoplates, Acta Astronautica, 102, pp. 140–150.

Fattahi, A.M., Safaei, B., 2017, Buckling analysis of CNT-reinforced beams with arbitrary boundary conditions, Microsystem Technologies, 23(10), pp. 5079–5091.

Liu, H., Safaei, B., Sahmani, S., 2022, Combined axial and lateral stability behavior of random checkerboard reinforced cylindrical microshells via a couple stress-based moving Kriging meshfree model, Archives of Civil and Mechanical Engineering, 22(1), pp. 1–20.

Yang, Z., Liu, A., Yang, J., Lai, S.K., Lv, J., Fu, J., 2021, Analytical prediction for nonlinear buckling of elastically supported fg-gplrc arches under a central point load, Materials, 14(8), pp. 1–14.

Yang, Z., Liu, A., Lai, S.K., Safaei, B., Lv, J., Huang, Y., Fu, J., 2022, Thermally induced instability on asymmetric buckling analysis of pinned-fixed FG-GPLRC arches, Engineering Structures, 250, 113243.

Safaei, B., Moradi-Dastjerdi, R., Behdinan, K., Chu, F., 2019, Critical buckling temperature and force in porous sandwich plates with CNT-reinforced nanocomposite layers, Aerospace Science and Technology, 91, pp. 175–185.

Magnucki, K., Magnucka-Blandzi, E., 2021, Generalization of a sandwich structure model: Analytical studies of bending and buckling problems of rectangular plates, Composite Structures, 255, 112944.

Sahmani, S., Aghdam, M.M., 2017, Size-dependent axial instability of microtubules surrounded by cytoplasm of a living cell based on nonlocal strain gradient elasticity theory, Journal of Theoretical Biology, 422, pp. 1339–1351.

Yunliang, D., Junping, H., 1995, General buckling analysis of sandwich constructions, Computers & Structures, 55(3), pp. 485–493.

Sahoo, B., Sharma, N., Mehar, K., Panda, S.K., 2020, Numerical buckling temperature prediction of graded sandwich panel using higher order shear deformation theory under variable temperature loading -, Smart Structures and Systems, 26, pp. 641–656.

Avilés, F., Carlsson, L.A., 2005, Elastic foundation analysis of local face buckling in debonded sandwich columns, Mechanics of Materials, 37(10), pp. 1026–1034.

Yuan, Y., Zhao, X., Zhao, Y., Sahmani, S., Safaei, B., 2021, Dynamic stability of nonlocal strain gradient FGM truncated conical microshells integrated with magnetostrictive facesheets resting on a nonlinear viscoelastic foundation, Thin-Walled Structures, 159, 107249.

Yang, Z., Huang, Y., Liu, A., Fu, J., Wu, D., 2019, Nonlinear in-plane buckling of fixed shallow functionally graded graphene reinforced composite arches subjected to mechanical and thermal loading, Applied Mathematical Modelling, 70, pp. 315–327

Sahmani, S., Safaei, B., 2021, Microstructural-dependent nonlinear stability analysis of random checkerboard reinforced composite micropanels via moving Kriging meshfree approach, The European Physical Journal Plus, 136(8), pp. 1–31.

Sahmani, S., Aghdam, M.M., Bahrami, M., 2016, Size-dependent axial buckling and postbuckling characteristics of cylindrical nanoshells in different temperatures, International Journal of Mechanical Sciences, 107, pp. 170–179.

Chen, S.X., Sahmani, S., Safaei, B., 2021, Size-dependent nonlinear bending behavior of porous FGM quasi-3D microplates with a central cutout based on nonlocal strain gradient isogeometric finite element modelling, Engineering with Computers, 37(2), pp. 1657–1678.

Sahmani, S., Aghdam, M.M., Rabczuk, T., 2018, Nonlinear bending of functionally graded porous micro/nano-beams reinforced with graphene platelets based upon nonlocal strain gradient theory, Composite Structures, 186, pp. 68–78.

Sahmani, S., Khandan, A., Saber-Samandari, S., Aghdam, M.M., 2018, Nonlinear bending and instability analysis of bioceramics composed with magnetite nanoparticles: Fabrication, characterization, and simulation, Ceramics International, 44(8), pp. 9540–9549.

Jasion, P., Magnucka-Blandzi, E., Szyc, W., Magnucki, K., 2012, Global and local buckling of sandwich circular and beam-rectangular plates with metal foam core, Thin-Walled Structures, 61, pp. 154–161.

Léotoing, L., Drapier, S., Vautrin, A., 2002, First applications of a novel unified model for global and local buckling of sandwich columns, European Journal of Mechanics-A/Solids, 21(4), pp. 683–701.

Fan, F., Lei, B., Sahmani, S., Safaei, B., 2020, On the surface elastic-based shear buckling characteristics of functionally graded composite skew nanoplates, Thin-Walled Structures, 154, 106841.

Sahmani, S., Aghdam, M.M., 2017, Temperature-dependent nonlocal instability of hybrid FGM exponential shear deformable nanoshells including imperfection sensitivity, International Journal of Mechanical Sciences, 122, pp. 129–142.

Ghanati, P., Safaei, B., 2019, Elastic buckling analysis of polygonal thin sheets under compression, Indian Journal of Physics, 93(1), pp. 47–52.

Yan, L.L., Han, B., Yu, B., Chen, C.Q., Zhang, Q.C., Lu, T.J., 2014, Three-point bending of sandwich beams with aluminum foam-filled corrugated cores, Materials & Design, 60, pp. 510–519.

Mehar, K., Panda, S.K., 2018, Elastic bending and stress analysis of carbon nanotube-reinforced composite plate: Experimental, numerical, and simulation, Advances in Polymer Technology, 37(6), pp. 1643–1657.

Barbaros, I., Yang, Y., Safaei, B., Yang, Z., Qin, Z., Asmael, M., 2022, State-of-the-art review of fabrication, application, and mechanical properties of functionally graded porous nanocomposite materials, Nanotechnology Reviews, 11(1), pp. 321–371.

Liu, Y., Qin, Z., Chu, F., 2020, Analytical study of the impact response of shear deformable sandwich cylindrical shell with a functionally graded porous core, Mechanics of Advanced Materials and Structures, 0(0), pp. 1–10.

Aldakheel, F., Miehe, C., 2017, Coupled thermomechanical response of gradient plasticity, International Journal of Plasticity, 91, pp. 1–24.

Aldakheel, F., 2017, Micromorphic approach for gradient-extended thermo-elastic–plastic solids in the logarithmic strain space, Continuum Mechanics and Thermodynamics, 29(6), pp. 1207–1217.

Chen, D.H., 2012, The collapse mechanism of corrugated cross section beams subjected to three-point bending, Thin-Walled Structures, 51, pp. 82–86.

Zhao, S., Zhao, Z., Yang, Z., Ke, L.L., Kitipornchai, S., Yang, J., 2020, Functionally graded graphene reinforced composite structures: A review, Engineering Structures, 210, 110339.

Wang, Y., Ermilov, V., Strigin, S., Safaei, B., 2021, Multilevel modeling of the mechanical properties of graphene nanocomposites/polymer composites, Microsystem Technologies, 27(12), pp. 4241–4251.

Zhang, J., Supernak, P., Mueller-Alander, S., Wang, C.H., 2013, Improving the bending strength and energy absorption of corrugated sandwich composite structure, Materials & Design, 52, pp. 767–773.

Alhijazi, M., Zeeshan, Q., Safaei, B., Asmael, M., Qin, Z., 2020, Recent Developments in Palm Fibers Composites: A Review, Journal of Polymers and the Environment, 28(12), pp. 3029–3054.

Alhijazi, M., Safaei, B., Zeeshan, Q., Asmael, M., Eyvazian, A., Qin, Z., 2020, Recent developments in Luffa natural fiber composites: Review, Sustainability, 12(18), pp. 1–25.

Mehar, K., Panda, S.K., 2019, Theoretical deflection analysis of multi-walled carbon nanotube reinforced sandwich panel and experimental verification, Composites Part B: Engineering, 167, pp. 317–328.

Sahmani, S., Aghdam, M.M., 2017, Size-dependent nonlinear bending of micro/nano-beams made of nanoporous biomaterials including a refined truncated cube cell, Physics Letters, Section A: General, Atomic and Solid State Physics, 381(45), pp. 3818–3830.

Safaei, B., Davodian, E., Fattahi, A.M., Asmael, M., 2021, Calcium carbonate nanoparticles effects on cement plast properties, Microsystem Technologies, 27(8), pp. 3059–3076.

Li, H., Wang, D., Xiao, Z., Qin, Z., Xiong, J., Han, Q., Wang, X., 2022, Investigation of vibro-impact resistance of fiber reinforced composite plates with polyurea coating with elastic constraints, Aerospace Science and Technology, 121, 107196.

Seong, D.Y., Jung, C.G., Yang, D.Y., Ahn, J., Na, S.J., Chung, W.J., Kim, J.H., 2010, Analysis of core shear stress in welded deformable sandwich plates to prevent de-bonding failure during U-bending, Journal of Materials Processing Technology, 210(9), pp. 1171–1179.

Mehar, K., Panda, S.K., Patle, B.K., 2018, Stress, deflection, and frequency analysis of CNT reinforced graded sandwich plate under uniform and linear thermal environment: A finite element approach, Polymer Composites, 39(10), pp. 3792–3809.

Fattahi, A.M., Safaei, B., Qin, Z., Chu, F., 2021, Experimental studies on elastic properties of high density polyethylene-multi walled carbon nanotube nanocomposites, Steel and Composite Structures, An International Journal, 38(2), pp. 177–187.

Sivaram, A.R., Manikandan, N., Krishnakumar, S.K., Rajavel, R., Krishnamohan, S., Vijayaganth, G., 2020, Experimental study on aluminium based sandwich composite with polypropylene foam sheet, Materials Today: Proceedings, 24, pp. 746–753.

Hu, J.S., Wang, B.L., 2021, Crack growth behavior and thermal shock resistance of ceramic sandwich structures with an auxetic honeycomb core, Composite Structures, 260, 113256.

Daouas, N., Hassen, Z., Aissia, H. Ben, 2010, Analytical periodic solution for the study of thermal performance and optimum insulation thickness of building walls in Tunisia, Applied Thermal Engineering, 30(4), pp. 319–326.

Wang, X., Wang, Z., Zeng, T., Cheng, S., Yang, F., 2018, Exact analytical solution for steady-state heat transfer in functionally graded sandwich slabs with convective-radiative boundary conditions, Composite Structures, 192, pp. 379–386.

Geoffroy, L., Davesne, A., Bellayer, S., Blanchard, F., Richard, E., Samyn, F., Jimenez, M., Bourbigot, S., 2020, 3D printed sandwich materials filled with hydrogels for extremely low heat release rate, Polymer Degradation and Stability, 179, 109269.

Safaei, B., Onyibo, E.C., Hurdoganoglu, D., 2022, Effect of static and harmonic loading on the honeycomb sandwich beam by using finite element method, Facta Universitatis, Series: Mechanical Engineering, doi: 10.22190/FUME220201009S

Patil, S.P., Parale, V.G., Park, H.H., Markert, B., 2021, Mechanical modeling and simulation of aerogels: A review, Ceramics International, 47(3), pp. 2981–2998.

Ogasawara, T., Ayabe, S., Ishida, Y., Aoki, T., Kubota, Y., 2018, Heat-resistant sandwich structure with carbon fiber-polyimide composite faces and a carbon foam core, Composites Part A: Applied Science and Manufacturing, 114, pp. 352–359.

Bekuit, J.-J.R.B., Oguamanam, D.C.D., Damisa, O., 2007, A quasi-2D finite element formulation for the analysis of sandwich beams, Finite Elements in Analysis and Design, 43(14), pp. 1099–1107.

Lecturer, S., 1969, Front Matter, Analysis and Design of Structural Sandwich Panels, doi: 10.1016/b978-0-08-012870-2.50015-8

Fleck, N.A., Sridhar, I., 2002, End compression of sandwich columns, Composites - Part A: Applied Science and Manufacturing, 33(3), pp. 353–359.

Goswami, P., Student, M.E., Indore, R., Pradesh, M., 2018, Thermal Insulation analysis of an Aramid honeycomb Sandwich Structure Filled with Silica Aerogel, International Journal of Engineering Research in Mechanical and Civil Engineering, 3(7), pp. 1–6.



  • There are currently no refbacks.

ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4