AN APPLICATION OF MULTICRITERIA OPTIMIZATION TO THE TWO-CARRIER TWO-SPEED PLANETARY GEAR TRAINS

Jelena Stefanović-Marinović, Sanjin Troha, Miloš Milovančević

DOI Number
10.22190/FUME160307002S
First page
85
Last page
95

Abstract


The objective of this study is the application of multi-criteria optimization to the two-carrier two-speed planetary gear trains. In order to determine mathematical model of multi-criteria optimization, variables, objective functions and conditions should be determined. The subject of the paper is two-carrier two-speed planetary gears with brakes on single shafts. Apart from the determination of the set of the Pareto optimal solutions, the weighted coefficient method for choosing an optimal solution from this set is also included in the mathematical model.


Keywords

Multi-criteria Optimization, Planetary Gear Train, Two-Speed Planetary Gear Trains, Pareto optimal solutions

Full Text:

PDF

References


Troha, S., 2011, Analysis of a planetary change gear train’s variants, (in Croatian), PhD Thesis, University of Rijeka, Engineering Faculty, Rijeka, Croatia., 395 p.

Kudrjavtsev, V. N., Kirdyiashev, I. N., 1977, Planetary gears, (in Russian), Handbook, Mashinostroenie, Leningrad., 535 p.

Arnaudow, K., Karaivanov, D., 2005, Systematik, Eigenschaften und Möglichkeiten von zusammengesetzten Mehrsteg-Planetengetrieben, Antriebstechnik, 5, pp. 58-65.

Ivanov, A., N., 1990, Evaluation of diametric dimensions of planetary gearboxes in the design phase, (in Russian),Vestnik mashinostroenie, 7, pp. 16-19.

Lechner, G., Naunheimer, H.,1999, Automotive transmissions, Springer-Verlag, Heidelberg, 438 p.

Jelaska, D., 2012, Gears and Gear Drives, University of Split, Croatia, 444 p.

Tudose, L., Buiga, O., Jucan, D., Stefanache, C., 2008, Multi-objective optimization in helical gears design, Proc. The Fifth International Symposium about Design in Mechanical Engineering KOD 2008, pp. 77-84, Novi Sad, Serbia.

Tkachev, A., Goldfarb, V., 2009, The concept of optimal design for spur and helical gears, Proc. The 3rd International Conference Power Transmissions 2009, pp.59-62, Kallithea, Greece.

Stefanović-Marinović, J., Petković, M., Stanimirović I., Milovančević, M., 2011, A model of planetary gear multicriteria optimization, Transactions of FAMENA, 35(4), pp. 21-34.

Sriatih, A., Yedukondalu G., Jagadeesh, A., 2011, Mechanical efficiency of planetary gear trains: An Estimate, Mechanical Engineering Research, 1(1), pp. 97-102.

Del Castillo, J.M., 2002, The analytical expression of the efficiency of planetary gear trains, Mechanism and Machine Theory, 37, pp. 197-214.

Stefanović-Marinović, J., 2008, Multicriterion optimization of planetary power transmission gear pairs, (in Serbian), PhD Thesis, University of Niš, Faculty of Mechanical Engineering, Niš, Serbia, 291 p.

Niemann G., Winter H., 1989, Maschinenelemente, Band II, Springer-Verlag Berlin, 376 p.

International Organization for Standardization, 2006, International standard ISO 6336-2, Calculation of load capacity of spur and helical gears.

Troha, S., Lovrin , N., Milovančević, M., 2012, Selection of the two–carrier shifting planetary gear train controlled by clutches and brakes, Transactions of FAMENA, 36(3), pp. 1-12.

Troha, S., Žigulić, R., Karaivanov, D., 2014, Kinematic operating modes of two-speed two-carrier planetary gear trains with four external shafts, Transactions of FAMENA, 38(1), pp. 63-76.

Troha S., Petrov P., Karaivanov, D., 2009, Regarding the optimization of coupled two carrier planetary gears with two coupled and four external shafts, Machine building and electrical engineering, 1, pp. 49–56.




DOI: https://doi.org/10.22190/FUME160307002S

Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4