Hui Du, Kristen Carpenter, David Hui, Mileva Radonjic

DOI Number
First page
Last page


Shale rocks play an essential role in petroleum exploration and production because they can occur either as source rocks or caprocks depending on their mineralogical composition and microstructures. More than 60% of effective seals for geologic hydrocarbon bearing formations as natural hydraulic barriers constitute of shale caprocks. The effectiveness of caprock depends on its ability to immobilize fluids, which include a low permeability and resilience to the in-situ formation of fractures as a result of pressurized injection. The alteration in sealing properties of shale rocks is directly related to the differences in their mineralogical composition and microstructure.

Failure of the shale starts with deterioration at micro/nanoscale, the structural features and properties at the micro/nanoscale can significantly impact the durability performance of these materials at the macroscale, therefore, study at micro/nanoscale becomes necessary to get better understanding of the hydraulic barriers materials to prevent failure and enhance long-term geologic storage of fluids.

Indentation tests were conducted at both micro and nanometer level on Marcellus shale samples to get the mechanical properties of bulk and individual phase of the multiphase materials. The mechanical properties map were created based on the nano indentation results and the properties of each individual phase can be correlated with bulk response in the multiphase composite; the effect of each component on the microstructure and bulk mechanical properties can be better understood.


Shale Rock, Mechanical Properties, Indentation

Full Text:



Diaz-Perez, A., Cortes-Monroy, I., Roegiers, J.C., 2007, The role of water/clay interaction in the shale characterization, Journal of Petroleum Science and Engineering, 58(1-2), pp. 83-98.

Bergaya, F. and Lagaly, G. (Eds.), 2013, Handbook of Clay Science, Volume 5, 2nd Edition, Elsevier, Amsterdam, Netherlands.

Bourg, Ian C., 2015, Sealing Shales versus Brittle Shales: A Sharp Threshold in the Material Properties and Energy Technology Uses of Fine-Grained Sedimentary Rocks, Journal of Environmental Science & Technology Letters, 2(10), pp. 255-259.

Ettensohn, F.R., and Barron, L.S., 1982, A tectonic-climatic approach to the deposition of the Devonian-Mississippian black-shale sequence of North America; Proceedings of the 1982 Eastern oil shale symposium: Proceedings - Eastern Oil Shale Symposium, v. 1982, pp. 5-37.

Fisher, G. W., Pettijohn, F. J., Reed Jr., J.C., and Weaver, K. N. (Eds.), 1970, Studies on Appalachian Geology: Central and Southern, Interscience (Wiley), New York, US, p. 460.

Lee Avary, K., The Geology of the Marcellus Shale, available online: http://www.wvgs.wvnet.edu/www/datastat/WVGES_GeologyMarcellusShale.pdf (Last access: 01.06.2017)

Cate, A.S., 1963, Lithostratigraphy of some Middle and Upper Devonian rocks in the subsurface of southwestern Pennsylvania, in Shepps, V.C. (Ed.), Symposium on Middle and Upper Devonian stratigraphy of Pennsylvania and adjacent states: Pennsylvania Geological Survey General Geology Report, 4th series, no. 39, pp. 229-240.

Hosterman, J.W., Whitlow, S.I., 1983, Clay Mineralogy of Devonian Shales in the Appalachian Basin, Geological Survey Professional Paper 1298, United States Government Printing Office, Washington, 31p.

Oliver, W. and Pharr, G., 1992, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, 7(6), pp. 1564-1583.

Dewhurst, D.N., Siggins, A.F., Kuila, U., Clennell, M.B., Raven, M.D., Nordgård-Bolås, H.M., 2008. Elastic, geomechanical and petrophysical properties of shales, Proceedings of American Rock Mechanics Association Symposium. Paper ARMA 08-208, 12p.

Mesri, G. and Olson, R.E., 1971, Mechanisms Controlling the Permeability of Clays, Clays and Clay Minerals, 19, pp. 151-158.

Wang, Z., Wang, H., and Cates, M.E., 2001. Effective elastic properties of solid clays. Geophysics, 66, 428-440.

Mondol, N.H., Jahren, J., Bjorlykke, K., and Brevik, I., 2008, Elastic properties of clay minerals, The Leading Edge, 27, pp. 758-770.

Pawley, A.R., Clark, S.M., and Chinnery, N.J., 2002, Equations of state measurements of chlorite, pyrophyllite, and talc, American Mineralogist, 87(8-9), pp. 1172-1182.

Dewhurst, D.N., Aplin, A.C., Sarda, J.-P. and Yang, Y., 1998, Compaction-driven evolution of porosity and permeability in natural mudstones: An experimental study, Journal of Geophysical Research: Solid Earth,103, pp. 651–661.

Dewhurst, D.N., Aplin, A.C. and Sarda, J.P., 1999, Influence of clay fraction on pore-scale properties and hydraulic conductivity of experimentally compacted mudstones, Journal of Geophysical Research, 104(B12), pp. 29261–29274.

Yang, Y. and Aplin, A.C., 2007, Permeability and petrophysical properties of 30 natural mudstones, Journal of Geophysical Research, 112(B3), B03206.

DOI: https://doi.org/10.22190/FUME170602016D


  • There are currently no refbacks.

ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4