REVIEW OF BONE SCAFFOLD DESIGN CONCEPTS AND DESIGN METHODS

Jelena Milovanović, Miloš Stojković, Milan Trifunović, Nikola Vitković

DOI Number
https://doi.org/10.22190/FUME200328038M
First page
151
Last page
173

Abstract


The paper brings out a review of existing, state-of-the-art approaches to designing the geometry of the scaffolds that are used for tissue engineering with a special emphasis on the macro scaffolds aimed for bone tissue recovery. Similar concepts of different authors are organized into groups. The focus of the paper is on determining the existing concepts as well as their advantages and disadvantages. Besides the review of scaffolds' geometry solutions, the analysis of the existing designs points to some serious misconceptions regarding the scaffold role within the (bone) tissue recovery. In the last section of the paper, the main requirements regarding geometry, that is, architecture and corresponding mechanical properties and permeability are reconsidered.

Keywords

Tissue Engineering, Bone Tissue Scaffolds, Design Concepts, Design Methods

Full Text:

PDF

References


Skalak, R., Fox, C.F., 1988, Tissue engineering, Proceedings of a workshop held at Granlibakken, Lake Tahoe, California, United States of America.

Stojkovic, М., Korunovic, N., Trajanovic, M., Milovanovic, J., Trifunovic, M., Vitkovic, N., 2013, Design study of Anatomically Shaped Latticed Scaffolds for the bone tissue recovery, III South-East European Conference on Computational Mechanics-SEECCM III, KOS, Greece, 12-14 June, S-2065.

Zhang, X.Y., Fang, G., Leeflang, S., Zadpoor, A., Zhou, J., 2019, Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials, Acta Biomaterialia, 84, pp. 437-452.

https://en.wikipedia.org/wiki/File:Cam_Bioceramics_Large_Porous_Granule.png [last access: 01.09.2020].

Reichert, J., Wullschleger, M., Cipitria, A., Lienau, J., Tan, K.C., Schuetz, M., Duda, G., Nöth, U., Eulert, J., Hutmacher, D., 2011, Custom-made composite scaffolds for segmental defect repair in long bones, International orthopaedics, 35, pp.1229-1236.

Hutmacher, D.W., 2001, Scaffold design and fabrication technologies for engineering tissues – State of the art and future perspectives, Journal of Biomaterials Science, Polymer Edition, 12(1), pp. 107-124.

Bastien, R., 2009, Fabrication of 3D-porous scaffolds by rapid prototyping method, Master's Thesis, Universitat Politecnica de Catalunya, Spain, 66 p.

Sachlos, E., Czernuszka, J.T., 2003, Making tissue engineering scaffolds work. Review: the application of solid freeform fabrication technology to the production of tissue engineering scaffolds, European cells & materials, 5, pp. 29-39; discussion pp. 39-40.

Sogutlu, S., Koc, B., 2007, Stochastic modeling of tissue engineering scaffolds with varying porosity levels, Computer-Aided Design & Applications, 4(5), pp. 661-670.

Sun, W., Darling, A., Starly, B., Nam, J., 2004, Computer-aided tissue engineering: overview, scope and challenges, Biotechnology and Applied Biochemistry, 39(1), pp. 29-47.

Sun, W., Starly, B., Darling, A., Gomez, C., 2004, Computer-Aided Tissue Engineering: Application to biomimetic modelling and design of tissue scaffolds, Biotechnology and Applied Biochemistry, 39(1), pp. 49-58.

Sun, W., Starly, B., Nam, J., Darling, A., 2005, Bio-CAD modeling and its applications in Computer-Aided Tissue Engineering, Computer-Aided Design, 37(11), pp. 1097-1114.

Starly, B., 2006, Biomimetic design and fabrication of tissue engineered scaffolds using Computer Aided Tissue Engineering, PhD Thesis, Drexel University, 152p.

Starly, B., Lau, A., Sun, W., Lau, W., Bradbury, T., 2004, Biomimetic design and fabrication of interior architecture of tissue scaffolds using solid freeform fabrication, Proceedings of the 15th Solid Freeform Fabrication Symposium, Austin, United States of America.

Gomez, C., Shokoufandeh, A., Sun, W., 2007, Unit-Cell Based Design and modeling in tissue engineering applications, Computer-Aided Design & Applications, 4(5), pp. 649-659.

Gomez, C., 2007, A unit cell based multi-scale modeling and design approach for tissue engineered scaffolds, Ph.D. Thesis, Drexel University, United States of America, 116 p.

Wettergreen, M.A., Bucklen, B.S., Starly, B., Yuksel, E., Sun, W., Liebschner, M.A.K., 2005, Creation of a unit block library of architectures for use in assembled scaffold engineering, Computer-Aided Design, 37(11), pp. 1141-1149.

Wettergreen, M.A., Bucklen, B.S., Sun, W., Liebschner, M.A.K., 2005, Computer-Aided Tissue Engineering of a human vertebral body, Annals of Biomedical Engineering, 33(10), pp. 1333-1343.

Chua, C.K., Leong, K.F., Cheah, C.M., Chua, S.W., 2003, Development of a tissue engineering scaffold structure library for rapid prototyping. Part 1: Investigation and classification, The International Journal of Advanced Manufacturing Technology, 21(4), pp. 291-301.

Chua, C.K., Leong, K.F., Cheah, C.M., Chua, S.W., 2003, Development of a tissue engineering scaffold structure library for rapid prototyping. Part 2: Parametric library and assembly program, The International Journal of Advanced Manufacturing Technology, 21(4), pp. 302-312.

Naing, M.W., Chua, C.K., Leong, K.F., Wang, Y., 2005, Fabrication of customised scaffolds using computer-aided design and rapid prototyping techniques, Rapid Prototyping Journal, 11(4), pp. 249-259.

Mahmoud, S., Eldeib, A., Samy, S., 2015, The design of 3D scaffold for tissue engineering using automated scaffold design algorithm, Australasian Physical & Engineering Sciences in Medicine, 38(2), pp.223–228.

Chantarapanich, N., Puttawibul, P., Sucharitpwatskul, S., Jeamwatthanachai, P., Inglam, S., Sitthiseripratip, K., 2012, Scaffold library for tissue engineering: A geometric evaluation, computational and mathematical methods in medicine, 2012, pp. 1-14.

Hollister, S.J., Levy, R.A., Chu, T.M., Halloran, J.W., Feinberg, S.E., 2000, An image-based approach for designing and manufacturing craniofacial scaffolds, International Journal of Oral and Maxillofacial Surgery, 29(1), pp. 67-71.

Taboas, J.M., Maddox, R.D., Krebsbach, P.H., Hollister, S.J., 2003, Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds, Biomaterials, 24(1), pp. 181-194.

Fang, Z., Starly, B., Shokoufandeh, A., Regli, W., Sun, W., 2005, A Computer-aided multi-scale modeling and direct fabrication of bone structure, Computer-Aided Design & Applications, 2(5), pp. 627-634.

Podshivalov, L., Gomes, C.M., Zocca, A., Guenster, J., Bar-Yoseph, P., Fischer, F., 2013, Design, analysis and additive manufacturing of porous structures for biocompatible micro-scale scaffolds, Procedia CIRP, 5, pp. 247-252.

Gomez, S., Vlad, M.D., Lopez, J., Fernandez, E., 2016, Design and properties of 3D scaffolds for bone tissue engineering, Acta Biomaterialia, 42, pp. 341-350.

Yoo, D.J., 2011, Computer-aided porous scaffold design for tissue engineering using Triply Periodic Minimal Surfaces, International Journal of Precision Engineering and Manufacturing, 12(1), pp. 61-71.

Yoo, D.J., 2014, Advanced porous scaffold design using Multi-Void Triply Periodic Minimal Surface models with high surface area to volume ratios, International Journal of Precision Engineering and Manufacturing, 15(8), pp. 1657-1666.

Shixiang, Y., Jinxing, S., Jiaming, B., Investigation of functionally graded TPMS structures fabricated by additive manufacturing, Materials & Design,182, 108021. 10.1016/j.matdes.2019.108021.

Sanjairaj, V., Zhang, L., Zhang, S., Fuh, J., Lu, W.F., 2018, Triply Periodic Minimal Surfaces sheet scaffolds for tissue engineering applications: An optimization approach towards biomimetic scaffold design, ACS Applied Bio Materials, 1(2), pp. 259-269.

Yoo, D.J., 2013, New paradigms in hierarchical porous scaffold design for tissue engineering, Materials Science and Engineering C: Materials for Biological Applications, 33(3), pp. 1759-1772.

Yang, N., Zhou, K., 2014, Effective method for multi-scale gradient porous scaffold design and fabrication, Materials Science and Engineering C, Materials for Biological Applications, 43(1), pp. 502-505.

Lal, P., Sun, W., 2004, Computer modeling approach for microsphere-packed bone scaffold, Computer-Aided Design, 36(5), pp. 487-497.

Lian, Q., Li, D.C., Tang, Y.P., Zhang, Y.R., 2006, Computer modeling approach for a novel internal architecture of artificial bone, Computer-Aided Design, 38(5), pp. 507-514.

Ramin, E., Harris, R.A., 2007, Automated design of tissue engineering scaffolds by advanced CAD, Proceedings of the 17th Solid Freeform Fabrication (SFF) Symposium, Austin, Texas, United States of America, pp. 435-449.

Ramin, E., Harris, R.A., 2009, Advanced computer-aided design for bone tissue-engineering scaffolds, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 223(3), pp. 289-301.

Cai, S., Xi, J., 2009, Morphology-controllable modeling approach for a porous scaffold structure in tissue engineering, Virtual and Physical Prototyping, 4(3), pp. 149-163.

Stojkovic, M., Trajanovic, M., Vitkovic, N., 2019, Personalized orthopedic surgery design challenge: human Bone redesign method, 9th CIRP Design Conference 2019, Póvoa de Varzim, Portgal, Procedia CIRP, 84, pp. 701-706.

Vitković, N., Stojković, M., Majstorović, V., Trajanović, M., Milovanović, J., 2018, Novel design approach for the creation of 3D geometrical model of personalized bone scaffold. CIRP Annals, 67(1), pp. 177–180.

Milovanović, J., 2014, Application of additive technologies in fabrication of anatomical custom made scaffolds for bone tissue reconstruction, PhD Thesis, Faculty of Mechanical Engineering University of Nis, Serbia, 274 p.

Bendsoe, M.P., Sigmund, O., 2003, Topology optimization: Theory, methods and applications, Springer-Verlag, Berlin Heidelberg, Germany, 364 p.

Metz, C., Duda, G., Checa, S., 2019, Towards multi-dynamic mechano-biological optimization of 3D-printed scaffolds to foster bone regeneration, Acta Biomaterialia. 101, pp. 117-127.

Henrique, A,. Almeida, Paulo J. Bártolo, 2013, Topological optimisation of scaffolds for tissue engineering, Procedia Engineering, 59, pp. 298-306.

Laurent, C., Durville, D., Rahouadj, R., Ganghoffer, J.F.,.2013, Computer-Aided Tissue Engineering: Application to the case of anterior cruciate ligament repair, Biomechanics of Cells and Tissues: Experiments, Models and Simulations, pp. 1-44.

Sutradhar, A., Paulino, G., Miller, M. J., Nguyen, T. H., 2010, Topological optimization for designing patient-specific large craniofacial segmental bone replacements, Proceedings of the National Academy of Sciences of the United States of America, 107(30), pp. 13222-13227.

Wu, J., Aage, N., Westermann, R., Sigmund, O., 2018, Infill optimization for additive manufacturing—Approaching bone-like porous structures, IEEE Transactions on Visualization and Computer Graphics, 24(2), pp. 1127-1140.

Hollister, S.J., 2005, Porous scaffold design for tissue engineering, Nature Materials, 4, pp. 518-524.

Hollister, S.J., 2009, Scaffold design and manufacturing: From concept to clinic, Advanced Materials, 21(32-33), pp. 3330-3342.

Hollister, S.J., Maddox, R.D., Taboas, J.M., 2002, Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints, Biomaterials, 23(20), pp. 4095-4103.

Hollister, S.J., Lin, C.Y., 2007, Computational design of tissue engineering scaffolds, Computer Methods in Applied Mechanics and Engineering, 196(31-32), pp. 2991-2998.

Lin, C.Y., Kikuchi, N., Hollister, S.J., 2004, A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity, Journal of Biomechanics, 37(5), pp. 623-636.

Challis, V.J., Roberts, A.P., Grotowski, J.F., Zhang, L.C., Sercombe, T.B., 2010, Prototypes for bone implant scaffolds designed via topology optimization and manufactured by solid freeform fabrication, Advanced Engineering Materials, 12(11), pp. 1106-1110.

Lin, C.Y., Hsiao, C.C., Chen, P.Q., Hollister, S.J., 2004, Interbody fusion cage design using integrated global layout and local microstructure topology optimization, Spine, 29(16), pp. 1747-1754.

Ghiasi, M., S., Chen, J., Vaziri, A., Rodriguez, E., Nazarian, A., 2017, Bone fracture healing in mechanobiological modeling: A review of principles and methods, Bone Reports, 6, pp. 87-100.

Comiskey, D., Mac Donald, B., Mccartney, W., Synnott, K., O'Byrne, J., 2010, The role of interfragmentary strain on the rate of bone healing-A new interpretation and mathematical model, Journal of biomechanics, 43, pp. 2830-2834.




DOI: https://doi.org/10.22190/FUME200328038M

Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4