NEW FUNCTION FOR REPRESENTING IEC 61000-4-2 STANDARD ELECTROSTATIC DISCHARGE CURRENT

Vesna Javor

DOI Number
-
First page
509
Last page
520

Abstract


New function for representing electrostatic discharge (ESD) currents according to the IEC 61000-4-2 Standard current is proposed in this paper. Good agreement with the Standard defined parameters is obtained. This function is compared to other functions from literature. Its first derivative needed for field calculations is analyzed in the paper. Main advantages are simplified choice of parameters, possibility to obtain discontinuities in the decaying part, and zero value of the function first derivative at t=0+. Parametrs of the function are obtained by using Least-squares method (LSQM).


Full Text:

PDF

References


C. Paul, "Introduction to Electromagnetic Compatibility", ed. 2, John Wiley & Sons, 2006.

EMC – Part 4-2: Testing and Measurement Techniques – Electrostatic Discharge Immunity Test. IEC International Standard 61000-4-2, basic EMC publication, 1995+A1:1998+A2:2000.

EMC – Part 4-2: Testing and Measurement Techniques – Electrostatic Discharge Immunity Test. IEC International Standard 61000-4-2, Ed. 2, 2009.

EMC – Part 4-3: Testing and Measurement Techniques - Radiated Radio-Frequency Immunity Test. IEC International Standard 61000-4-3, Ed. 2, 2002.

EMC – Part 4-3: Testing and Measurement Techniques - Radiated Radio-Frequency Immunity Test. IEC International Standard 61000-4-3 (77B/339/FDIS), Ed. 3, 2006+A1:2007.

T. Ishida, G. Hedderich, "Recent Status of IEC 61000-4-2 and IEC 61000-4-3", EMC’09 Kyoto, 2009, pp. 821-824.

T. C. Moyer, R. Gensel, "Update on ESD testing according to IEC 61000-4-2", EM Test.

D. Pommerenke, M. Aidam, "ESD: waveform calculation, field and current of human and simulator ESD", J. Electrostat., No.38, 1996, pp. 33-51.

O. Fijuwara, H. Tanaka, Y. Yamanaka, "Equivalent circuit modeling of discharge current injected in contact with an ESD gun", Electr. Eng. Japan, No.149, 2004, pp. 8-14.

N. Murota, "Determination of characteristics of the discharge current by the human charge model ESD", Simulator Electron. Commun. Japan, No.80, 1997, pp. 49-57.

K. Wang, D. Pommerenke, R. Chundru, T. Van Doren, J. L. Drewniak, A. Shashindranath, "Numerical modeling of electrostatic discharge generators", IEEE Transactions on EMC, Vol.45, No.2, May 2003, pp. 258-271.

S. V. Berghe, D. Zutter, "Study of ESD signal entry through coaxial cable shields", J. Electrostat., No.44, 1998, pp. 135-148.

Z. Yuan, T. Li, J. He, S. Chen, R. Zeng, "New mathematical descriptions of ESD current waveform based on the polynomial of pulse function", IEEE Transactions on EMC, Vol.48, No.3, 2006, pp. 589-591.

V. Javor, "Multi-Peaked Functions for Representation of Lightning Channel-Base Currents," 31st Int. Conf. on Lightning Protection ICLP 2012, Proc. of papers, DOI: 10.1109/ICLP.2012.6344384 ,Vienna, 2012.

V. Javor, "Approximation of a double-peaked lightning channel-base current", COMPEL: The Int. Journal for Comp. and Mathematics in Electrical and Electronic Engineering, Vol.31, No.3, 2012, pp. 1007-1017.

G. P. Fotis, I. F. Ganos and I. A. Stathopulos "Determination of discharge current equation parameters of ESD using genetic algorithms," Electronic Letters, Vol.42, No.14, July 2006.

G. P. Fotis, F. E. Asimakopoulou, I. F. Ganos and I A. Stathopulos, "Applying genetic algorithms for the determination of the parameters of the electrostatic discharge current equation", Measurement Science and Technology, Vol.17 (2006), pp. 2819-2827, 2006.

K. Lundengard, M. Rančić, V. Javor, S. Silvestrov, "Estimation of pulse function parameters for approximating measured lightning currents using the Marquard least-squares method", EMC Europe 2014, 2014, (accepted for publication).

R. K. Keenan, L. K. A. Rosi, "Some fundamental aspects of ESD testing", in Proc. IEEE Int. Symp. on Electromagnetic Compatibility, Aug. 12-16, 1991, pp. 236-241.

F. Heidler, “Travelling current source model for LEMP calcula¬tion,” in Proc. 6th Int. Zurich Symp. EMC, Zurich, Switzerland, pp. 157-162, Mar. 1985.

K. Wang, J. Wang, X. Wang, "Four order electrostatic discharge circuit model and its simulation", TELKOMNIKA, Vol.10, No.8, pp. 2006-2012, Dec. 2012.

G. P. Fotis, L. Ekonomou, "Parameters’ optimization of the electrostatic discharge current equation", Int. Journal on Power System Optimization., Vol.3, No.2, pp. 75-80, 2011.

S. Shenglin, B. Zengjun, L. Shange, "A new analytical expression of standard current waveform", High Power Laser and Particle Beams, Vol.15, No.5, pp. 464-466, 2003.

R. Chundru, D. Pommerenke, K. Wang, T. Van Doren, F. P. Centola, J. S. Huang "Characterization of human metal ESD reference discharge event and correlation of generator parameters to failure levels – Part I: Reference event", IEEE Transactions on EMC, Vol.46, No.4, pp. 498-504, Nov. 2004.

V. Javor, "Modeling of lightning strokes using two-peaked channel-base currents", Int. Journal of Antennas and Propagation, Vol. 2012, Article ID 318417, doi: 10.1155/2012/318417, 2012.


Refbacks

  • There are currently no refbacks.


ISSN: 0353-3670 (Print)

ISSN: 2217-5997 (Online)

COBISS.SR-ID 12826626