COMPREHENSIVE EVALUATION OF DIMENSIONAL DEVIATION, FLANK WEAR, SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE IN DRY TURNING OF C45 STEEL

Aleksandar Milosevic, Goran Simunovic, Zeljko Kanovic, Katica Simunovic, Zeljko Santosi, Mario Sokac, Djordje Vukelic

DOI Number
https://doi.org/10.22190/FUME240403024M
First page
547
Last page
566

Abstract


The study investigated the turning of C45 steel in a dry environment. The input parameters that were varied were cutting speed, feed, depth of cut, corner radius and insert type. The experimental investigations were carried out according to a custom experimental design using the D-optimality criterion. The measured output parameters were dimensional deviation, flank wear and surface roughness, while the material removal rate was calculated. A detailed analysis and evaluation of the effects of the input parameters on the output parameters was carried out. The model was diagnosed and appropriate regression equations was established. Based on the obtained regression equations, multi-objective optimisation was performed using particle swarm optimisation. The objective function was to simultaneously minimise dimensional deviation, flank wear and surface roughness and maximise material removal rate. The optimisation was carried out for different weighting coefficients of each output function for different production requirements. The obtained models and optimal values were verified by additional confirmation experiments.

Keywords

Dry turning, Dimensional deviation, Flank wear, Surface roughness

Full Text:

PDF

References


Jovicic, G., Milosevic, A., Kanovic, Z., Sokac, M., Simunovic, G., Savkovic, B., Vukelic, D., 2023, Optimization of Dry Turning of Inconel 601 Alloy Based on Surface Roughness, Tool Wear, and Material Removal Rate, Metals, 13(6), 1068.

Vukelic, D., Simunovic, K., Kanovic, Z., Saric, T., Tadic, B., Simunovic, G., 2021, Multi-objective optimization of steel AISI 1040 dry turning using genetic algorithm, Neural Computing and Applications, 33(19), pp. 12445-12475.

Jozić S., Dumanić I., Bajić D., 2020, Experimental analysis and optimization of the controllable parameters in turning of en aw-2011 alloy; dry machining and alternative cooling techniques, Facta Universitatis-Series Mechanical Engineering, 18(1), pp. 13-29.

Vukelic, D., Prica, M., Ivanov, V., Jovicic, G., Budak, I., Luzanin, O., 2022, Optimization of surface roughness based on turning parameters and insert geometry, International Journal of Simulation Modelling, 21(3), pp. 417-428.

Guvenc, M.A., Bilgic, H.H., Mistikoglu, S., 2023, Identification of chatter vibrations and active vibration control by using the sliding mode controller on dry turning of titanium alloy (Ti6Al4V), Facta Universitatis-Series Mechanical Engineering, 21 (2), pp. 307-322.

Grzesik, W., 2006, Composite layer-based analytical models for tool-chip interface temperatures in machining medium carbon steels with multi-layer coated cutting tools, Journal of Materials Processing Technology, 176(1-3), pp. 102-110.

Piska, M., Polzer, A., Cihlarova, P., Stankova, D., 2009, On the structural integrity of the nano-PVD coatings applied on cutting tools, Damage and Fracture Mechanics: Failure Analysis of Engineering Materials and Structures, pp. 195-204.

Stachurski, W., Kruszyński, B., Midera, S., 2012, Influence of cutting conditions in turning with wiper type inserts on surface roughness and cutting forces, Mechanics and Mechanical Engineering, 16(1), pp. 25-32.

Nieslony, P., Grzesik, W., Laskowski, P., Habrat W., 2013, FEM-Based modelling of the influence of thermophysical properties of work and cutting tool materials on the process performance, Procedia CIRP, 8, pp. 3-8.

Segreto, T., Simeone, A., Teti, R., 2014, Principal component analysis for feature extraction and NN pattern recognition in sensor monitoring of chip form during turning, CIRP Journal of Manufacturing Science and Technology, 7(3), pp. 202-209.

Michal, P., Vagaská, A., Gombár, M., Kmec, J., 2014, Mathematical modelling and optimization of technological process using design of experiments methodology, Applied Mechanics and Materials, 616, pp. 61-68.

Selvam, M.D., Senthil, P., 2016, Investigation on the effect of turning operation on surface roughness of hardened C45 carbon steel, Australian Journal of Mechanical Engineering, 14(2), pp. 131-137.

Horvath, R., Lukacs, J., 2017, Application of a force model adapted for the precise turning of various metallic materials, Strojniski Vestnik-Journal of Mechanical Engineering, 63(9), pp. 489-500.

Necpal, M., Pokorný, P., Kuruc, M., 2017, Finite element analysis of tool stresses, temperature and prediction of cutting forces in turning process, Solid State Phenomena, 261, pp. 354-361.

Vereschaka, A.A., Grigoriev, S.N., Sitnikov, N.N., Batako, A.D., 2017, Delamination and longitudinal cracking in multi-layered composite nano-structured coatings and their influence on cutting tool life, Wear, 390-391, pp. 209-219.

Vereschaka, A.A., Bublikov, J.I., Sitnikov, N.N., Oganyan, G.V., Sotova, C.S., 2018, Influence of nanolayer thickness on the performance properties of multilayer composite nano-structured modified coatings for metal-cutting tools, International Journal of Advanced Manufacturing Technology, 95(5-8), pp. 2625-2640.

Klocke, F., Lortz, W., Trauth, D., 2018, Analysis of the dynamic chip formation process in turning, International Journal of Mechanical Sciences, 135, pp. 313-324.

Dragicevic, M., Begović, E., Peko, I., 2019, Optimization of dry turning process parameters using Taguchi method combined with fuzzy logic approach, Proceedings on Engineering Sciences, 1(1), pp. 429-435.

Gjelaj, A., Berisha, B., Smaili, F., 2019, Optimization of turning process and cutting force using multiobjective genetic algorithm, Universal Journal of Mechanical Engineering, 7(2), pp. 64-70.

Zmarzły, P., 2020, Technological heredity of the turning process, Tehnicki vjesnik-Technical Gazette, 27(4), pp. 1194-1203.

Zajac, J., Duplak, J., Duplakova, D., Cizmar, P., Olexa, I., Bittner, A., 2020, Prediction of cutting material durability by T = f(vc) dependence for turning processes, Processes, 8(7), 789.

Usman, M.M., Zou, P., Tian, Y., Wang, W., 2020, Experimental investigation on surface functional indices in Ultrasonic Elliptical Vibration Cutting of C45 carbon steel, International Journal of Advanced Manufacturing Technology, 109(1-2), pp. 187-200.

Mikołajczyk, T., Latos, H., Pimenov, D.Y., Paczkowski, T., Gupta, M.K., Krolczyk, G., 2020, Influence of the main cutting edge angle value on minimum uncut chip thickness during turning of C45 steel, Journal of Manufacturing Processes, 57, pp. 354-362.

Titu, A.M., Pop, A.B., Sandu, I.G., 2021, Study of temperature and stresses using finite element analysis in turning of C45 material, Journal of Physics: Conference Series, 1960(1), 012023.

Oleksik, M., Dobrotă, D., Tomescu, M., Petrescu, V., 2021, Improving the performance of steel machining processes through cutting by vibration control, Materials, 14(19), 5712.

Abidi, Y., 2021, Analysis of the compromise between cutting tool life, productivity and roughness during turning of C45 hardened steel, Production Engineering Archives, 27(1), pp. 30-35.

Zaida, H., Bouchelaghem, A.M., Chehaidia, S.E., 2021, Experimental study of tool wear evolution during turning operation based on DWT and RMS, Defect and Diffusion Forum, 406, pp. 392-405.

Ivchenko, O., Ivanov, V., Trojanowska, J., Zhyhylii, D., Ciszak, O., Zaloha, O., Pavlenko, I., Hladyshev, D., 2022, Method for an Effective Selection of Tools and Cutting Conditions during Precise Turning of Non-Alloy Quality Steel C45, Materials, 15(2), 505.

Kovalčík, J., Mašek, P., Malý, J., Kožmín, P., Syrovátka, J., 2022, The Effect of Coatings on Cutting Force in Turning of C45 Steel, Materials, 15(2), 590.

Jurko, J., Miškiv-Pavlík, M., Hladký, V., Lazorík, P., Michalík, P., Petruška, I., 2022, Measurement of the Machined Surface Diameter by a Laser Triangulation Sensor and Optimalization of Turning Conditions Based on the Diameter Deviation and Tool Wear by GRA and ANOVA, Applied Sciences, 12(10), 5266.

Vukelic, D., Simunovic, K., Kanovic, Z., Saric, T., Doroslovacki, K., Prica, M., Simunovic, G., 2022, Modelling surface roughness in finish turning as a function of cutting tool geometry using the response surface method, Gaussian process regression and decision tree regression, Advances in Production Engineering and Management, 17(3), pp. 367-380.

Niemczewska-Wojcik, M., Madej, M., Kowalczyk, J., Piotrowska, K., 2022, A comparative study of the surface topography in dry and wet turning using the confocal and interferometric modes, Measurement, 204, 112144.

Kuruc, M., Vopát, T., Peterka, J., Necpal, M., Šimna, V., Milde, J., Jurina, F., 2022, The Influence of Cutting Parameters on Plastic Deformation and Chip Compression during the Turning of C45 Medium Carbon Steel and 62SiMnCr4 Tool Steel, Materials, 15(2), 585.

Moravčíková, J., Moravčík, R., Palcut, M., 2022, Effect of Heat Treatment on the Resulting Dimensional Characteristics of the C45 Carbon Steel after Turning, Metals, 12(11), 1899.

Slusarczyk, L., Franczyk, E., 2023, Analytical method for determining cutting forces during orthogonal turning of C45 steel, Materials Research Proceedings, 28, pp. 1313-1322.




DOI: https://doi.org/10.22190/FUME240403024M

Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4