GEOMETRICAL MODELS OF MANDIBLE FRACTURE AND PLATE IMPLANT

Karim Husain, Mohammed Rashid, Nikola Vitković, Jelena Mitić, Jelena Milovanović, Miloš Stojković

DOI Number
10.22190/FUME170710028H
First page
369
Last page
379

Abstract


In the oral and maxillofacial surgery, there is a requirement to provide the best possible treatment for the patient with mandibular fractures. This treatment presumes application of reduction and fixation techniques for proper stabilization of the fracture site. The reduction of the bone fragments and their fixation is much better performed when geometry and morphology of the bone and osteofixation elements (e.g. plates) are properly defined. In this paper, a new healthcare procedure, which enables application of personalized plate implants for the fixation of the mandibular fractures, is presented. Geometrical models of mandible and plate implants, presented in this research, were created by means of the Method of Anatomical Features (MAF), which has been already applied to the creation of accurate geometrical models of various human bones, plates and fixators. By using such geometrically and anatomically accurate models, orthopedic and maxillofacial surgeons can better perform pre-operative tasks of simulating and planning the operation, as well as an intraoperative task of implanting the personalized plate into the patient body.


Keywords

CAD, Orthopedic, Mandible, Fracture, Plate, Parametric Models, Method of Anatomical Features

Full Text:

PDF

References


Lee, J.H., 2017, Treatment of Mandibular Angle Fractures, Archives of Craniofacial Surgery, 18(2), pp.73-75.

Prasad, V.N., Khanal, A., 2016, Computed Tomography evaluation of maxillofacial injuries, Journal of College of Medical Sciences-Nepal, 12(4), pp. 131-136.

Stojković, M., Veselinović, M., Vitković, N., Marinković, D., Trajanović, M., Arsić, S., Mitković, M., 2018, Reverse modelling of human long bones using T-splines – case of tibia, Tehnicki Vjesnik, accepted for publishing.

Van Eijden, T.M., 2000, Biomechanics of the mandible, Crit Rev Oral Biol Med, 11(1), pp. 123-36.

Arsić S., Perić, P., Stojković M., Ilić, D., Stojanović, M., Ajduković, Z., Vucić, S., 2010, Comparative analysis of linear morphometric parameters of the humane mandibula obtained by direct and indirect measurement, Vojnosanitetski Pregled, 67(10), pp. 839–846.

Kumar, M.P., Lokanadham, S., 2013, Sex determination & morphometric parameters of human mandible, International Journal of Research in Medical Sciences, 1(2), pp. 93-96.

Standring, S. (ed.), 2005, Gray’s anatomy, 38th edn. Elsevier, New York, p. 2092.

Benazzi, S., Stansfield, E., Kullmer, O., Fiorenza, L., Gruppioni, G., 2009, Geometric morphometric methods for bone reconstruction: the mandibular condylar process of Pico della Mirandola, Anatomical Record, 292(8), pp. 1088–1097.

https://www2.aofoundation.org/, Mandible Special Considerations, (last access: 20.05.2016).

Joshi, U., Kurakar, M., 2014, Comparison of Stability of Fracture Segments in Mandible Fracture Treated with Different Designs of Mini-Plates Using FEM Analysis, Journal of Maxillofacial and Oral Surgery, 13(3), pp. 310-319.

Zhou, K.H., Chen, N., 2017, Locking non-locking neutralization plates with limited excision and internal fixation for treatment of extra-articular type a distal tibial fractures, The Open Orthopaedics Journal, 11(1), pp. 57-63.

Harjani, B., Singh, R.K., Pal, U.S., Singh, G., 2012, Locking v/s non-locking reconstruction plates in mandibular reconstruction, National Journal of Maxillofacial Surgery, 3(2), pp. 159-165.

Calhoun, P.S., Kuszyk, B.S., Heath, D.G., Carley, J.C., Fishman, E.K., 1999, Three-dimensional volume rendering of spiral CT data: theory and method, Radiographics, 19(3), pp.745-764.

Filippi, S., Motyl, B., Bandera, C., 2008, Analysis of existing methods for 3D modelling of femurs starting from two orthogonal images and development of a script for a commercial software package, Computer methods and programs in biomedicine, 89(1), pp. 76-82.

Sholukha, V., Chapman, T., Salvia, P., Moiseev, F., Euran, F., Rooze, .M, Van Sint Jan, S., 2011, Femur shape prediction by multiple regression based on quadric surface fitting, Journal of Biomechanics, 44(4), pp. 712-718.

Vitković, N., Milovanović, J., Korunović, N., Trajanović, M., Stojković, M., Mišić, D., Arsić, S., 2013, Software system for creation of human femur customized polygonal models, Computer Science and Information Systems, 10(3), pp. 1473-1497.

Vitković, N., Mitić, J., Manić, M., Trajanović, M., Husain, K., Petrović, S., Arsić, S., 2015, The Parametric Model of the Human Mandible Coronoid Process Created by Method of Anatomical Features, Computational and Mathematical Methods in Medicine, vol. 2015, Article ID 574132, 10 pages.

Juodzbalys, G., Wang, H., Sabalys, G., Anatomy of mandibular vital structures. Part I: mandibular canal and inferior alveolar neurovascular bundle in relation with sental implantology, Journal of Oral & Maxillofacial Research, 1(1), article e2.

Juodzbalys, G., Wang, H.L., Sabalys, G., Anatomy of mandibular vital structures. Part II: mandibular incisive canal, mental foramen and associated neurovascular bundles in relation with dental implantology, Journal of Oral & Maxillofacial Research, 1(1), article e3.

Marca, D., McGowan, C., 1987, Structured Analysis and Design Technique, McGraw-Hill, Inc. New York, NY, USA, p. 392.

https://www2.aofoundation.org/, Plate types (last access: 08.10.2017)

Milovanović, J., Stojković, M., Trajanović, M., 2015, Applicability analysis of additive manufacturing processes in fabrication of anatomically shaped lattice scaffold, Facta Universitatis-Series Mechanical Engineering, 13(3), pp. 295-305.




DOI: https://doi.org/10.22190/FUME170710028H

Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4