METHOD OF CONVERSION OF HIGH- AND MIDDLE-SPEED DIESEL ENGINES INTO GAS DIESEL ENGINES

Mikhail G. Shatrov, Vladimir V. Sinyavski, Andrey Yu. Dunin, Ivan G. Shishlov, Andrey V. Vakulenko

DOI Number
10.22190/FUME171004023S
First page
383
Last page
395

Abstract


The paper aims at the development of fuel supply and electronic control systems for boosted high- and middle-speed transport engines. A detailed analysis of different ways of converting diesel engine to operate on natural gas was carried out. The gas diesel process with minimized ignition portion of diesel fuel injected by the Common Rail (CR) system was selected. Electronic engine control and modular gas feed systems which can be used both on high- and middle-speed gas diesel engines were developed. Also diesel CR fuel supply systems were developed in cooperation with the industrial partner, namely, those that can be mounted on middle-speed diesel and gas diesel engines. Electronic control and gas feed systems were perfected using modeling and engine tests. The high-speed diesel engine was converted into a gas diesel one. After perfection of the gas feed and electronic control systems, bench tests of the high-speed gas diesel engine were carried out showing a high share of diesel fuel substitution with gas, high fuel efficiency and significant decrease of NOх and СО2 emissions.

Keywords

Gas Diesel Engine, Engine Control System, Gas Feed System, Diesel Fuel Supply System, High-speed Engine, Middle-speed Engine

Full Text:

PDF

References


Markov, V.A., Gaivoronski, A.I., Grehov, L.V., Ivaschenko, N.A., 2008, Operation of Diesel Engine on Non-Traditional Fuels, Legion-Avtodata, Moscow, 464 p.

Shatrov, M.G., Khatchijan, A.S., Shishlov, I.G., Vakulenko, A.V., 2008, Analysis of Conversion Methods of Automotive Diesel Engines to be Powered with Natural Gas, Transport na Alternativnom Toplive/Transport on Alternative Fuel, 4(34), pp. 29-32.

Luksho, V.A., 2015, A Complex Method of Increasing Energy Efficiency of Gas Engines with High Compression Ratio and Shortened Intake and Exhaust Strokes, Ph.D. thesis, NAMI, Moscow, 365 p.

Ivan S. Ivković, Snežana M. Kaplanović, Branko M. Milovanović, 2017, Influence of Road and Traffic Conditions on Fuel Consumption and Fuel Cost for Different Bus Technologies. Thermal Science, 21(1B), pp. 693-706.

José Geiger, Peter Heuser, Sven Lauer, Berthold Huchtebrock, Harsh Sankhla, 2013, Combustion System Development for a Large Bore Gas Engine – Efficient combination of Simulation and Experiment, Paper no 80, 27th SIMAC Congress, Helsinki

Klausner, J., Lang J., Trapp, C., 2011, J624 – Der weltweit erste Gasmotor mit zweistufiger Aufladung, MTZ – Motortechnische Zeitschrift Ausgabe, 04.

Grotz, M., Böwing, R., Lang, J., Thalhauser, J., Christiner, P., Wimmer, A., 2015, Efficiency Increase of a High Performance Gas Engine for Distributed Power Generation, 6th CIMAC Cascades. Dual fuel and gas engines – Their Impact on Application, Design and Components

Kudryavtzev, A., Lomashov, V., 2010, Belaz Trucks of XXI Century with DM Family Gas Diesel Engines, AvtoGasoZapravochniy komplex + Alternatvnoye toplivo/AutoGasFillingComplex + Alternative Fuel, 3, pp. 3-6.

Kapustin, A.A., 2008, Fuel Feed and Control System of a Gas Diesel Engine Operating on Natural Gas. Transport na alternativnom toplive/Transport on Alternative Fuel, 4, pp. 46-49.

Grehov, L.V., Ivsachenko, N.A., Markov, V.A., 2010, On Ways to Improve the Gas Diesel Cycle, AvtoGasoZapravochniy komplex + Alternatvnoye toplivo/AutoGasFillingComplex + Alternative Fuel, 7(100), pp. 10-14.

Imhof, D., Tsuru, D., Tajima, H., Takasaki, K, 2013, High-Pressure Natural Gas Injection (GI) Marine Engine Research with a Rapid Compression Expansion Machine, Paper no 12, 26th SIMAC Congress, Shanghai

Mikulski, M., Wierzbicki, S., 2017, Validation of a Zero-Dimensional and Two-Phase Combustion Model for Dual-Fuel Compression Ignition Engine Simulation, Thermal Science, 21(1B), pp. 387-399.

Shatrov, M. G., Golubkov, L. N., Dunin, A. Yu., Yakovenko, A. L., Dushkin, P. V., 2015, Influence of high injection pressure on fuel injection perfomances and diesel engine working process, Thermal science, 19(6), pp. 2245-2253.

Khatchijan, A.S., Sinyavskiy, V.V., Shishlov, I.G., Karpov, D.M., 2010, Modeling of Parameters and Characteristics of Natural Gas Powered Engines, Transport na Alternativnom Toplive/Transport on Alternative Fuel, 2010, 3(15), pp. 14-19.




DOI: https://doi.org/10.22190/FUME171004023S

Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4