THE USE OF RECYCLED CRUSHED CLAY BRICK AGGREGATE FOR THE PURPOSE OF FORMING A PREFABRICATED FAÇADE PANEL

Tijana Vojnović Ćalić, Dragica Jevtić, Aleksandra Krstić-Furundžić

DOI Number
10.2298/FUACE161117004V
First page
059
Last page
072

Abstract


The contemporary 4R concept of waste management, in accordance with the globally spread trend of sustainability, promotes: reducing the amount of waste at the source, reusing of elements and their parts, recycling in order to produce raw material and recovering of the embodied energy. Discarded bricks from building demolition sites considered in this research could be reused, but also crushed in appropriate facilities and employed as aggregate in various cement composites. This paper investigates the possibility of using such recycled crushed clay brick material as aggregate in a prefabricated composite façade panel with the face of stone, which can be used in a ventilated façade system. It describes the production process of a pilot element, and further suggests the details of the façade cladding technology concerning the proposed element, i.e. its production technology options, as well as transport and installation technologies. The paper further displays various design possibilities of the panel closely related to the production technology options, as well as observed aspects of sustainability and cost effectiveness relevant to the application of the proposed façade panel. The research contributes to the contemporary course of sustainability within the construction industry by proposing an example of forming a new prefabricated building element using recycled building demolition waste material.


Keywords

recycling, reuse, sustainability, composite façade panel, prefabrication, cladding technology

Full Text:

PDF

References


Unated Nations, UN Documents: Gathering a Body of Global Agreements, http://www.un-documents.net/

ocf-02.htm, accessed 30th August 2016.

D. Jevtić, D. Zakić, i A. Savić, "Specifičnosti tehnologije spravljanja betona na bazi recikliranog agregata", Materijali i konstrukcije, br. 52, no. 1, str. 52-62, 2009.

K. R. Kareem and R. K. Pandey, "Study of management and control of waste construction materials in civil construction project", International Journal of Engineering and Advanced Technology (IJEAT), vol 2, no. 3, pp. 345-50, 2013.

J. J. Kim and B. Rigdon, Sustainable Architecture Module: Introduction to Sustainable Design, National Pollution Prevention Center for Higher Education, University Ave, Ann Arbor, 1998, http://www.umich.edu/~nppcpub/resources/compendia/ARCHpdfs/ARCHdesIntro.pdf, accessed 30th August 2016.

U. S. Department of Energy, Buildings Energy Data Book: Notes on Embodied Energy, http://buildingsdatabook.eren.doe.gov/TableView.aspx?table=Notes, accessed 30th August 2016.

P. B. Cachim, "Mechanical properties of brick aggregate concrete", Construction and Building Materials vol. 23, pp. 1292-1297, 2009.

B. Berge, The Ecology of Building Materials, Elsevier, Oxford, 2009.

D. Jevtić i T. Vojnović Ćalić, "Fizičko-mehanička svojstva mikroarmiranih maltera sa agregatom u vidu drobljene opeke i ekspandirane gline", u Građevinski materijali u savremenom graditeljstvu, Z. Grdić , Ed. Beograd: Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, 2014, str. 237-246.

T. Vojnović Ćalić, D. Jevtić i A. Krstić-Furundžić, "Otpornost na mraz mikroarmiranih cementnih maltera sa agregatom od drobljene opeke", u Građevinski materijali u savremenom graditeljstvu, D. Jevtić, Ed. Beograd: Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, 2015, str. 39-48.

T. Vojnović Ćalić i D. Jevtić, "Čvrstoća pri pritisku mikroarmiranih cementnih maltera i funkcionalna zavisnost u odnosu na svojstva ispitana metodama bez razaranja", u Savremeni materijali i konstrukcije sa regulativom, D. Jevtić, Ed. Beograd: Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, 2016, str. 41-50.

C. S. Poon, and D. Chan, "Paving blocks made with recycled concrete aggregate and crushed clay brick", Construction and Building Materials, vol. 20, pp. 569-77, 2006.

D. Jevtić, D. Zakić, J. Markićević, Lj. Pavlović, i A. Terzić, "Mogućnost spravljanja i primene betona na bazi recikliranog opekarskog loma", u I simpozijum o reciklažnim tehnologijama i održivom razvoju, 2006, str. 135-41.

M. Muravljov, Građevinski materijali: Posebni deo 2, Građevinski fakultet, Beograd, 1983.

Pravilnik o tehničkim normativima za beton i armirani beton spravljen sa prirodnom i veštačkom lakoagregatnom ispunom, Savezni zavod za standardizaciju, 1990.

M. Muravljov, Osnovi teorije i tehnologije betona, Građevinska knjiga, Beograd, 2010.

V. Radonjanin, M. Malešev i R. Folić, "Polimerima modifikovani betoni", u Specijalni betoni i malteri: Svojstva, tehnologija, primena, M. Muravljov, Ed.. Beograd: Građevinski fakultet Univerziteta u Beogradu, 1999, str. 117-136.

S. Otović, "Tehnologija proizvodnje i izvođenja elemenata sa aspekta materijala", u Montažne betonske fasade, R. Dimitrijević, Ed. Beograd: Institut IMS, 1995, str. 131-138.

J. J. Svec, and P. E. Jeffers, Modern Masonry Panel Construction Systems, Brick and Clay Record, Boston, 1972.

Lithodecor, http://www.lithodecor.de, accessed 30th August 2016.

D. Magajne, "Tehnologija gradnje objekata po sistemu slobodnostojećih elemenata", u Sistem samostojećih elemenata: Uvođenje sistema montažne gradnje od opeke – ciglarskih proizvoda u visokogradnji, Goričke ciglane i Projekt Nova Gorica, 1979, str. 32-37.

A. Krstić, Raznovrsnost materijalizacije arhitektonskih struktura, Arhitektonski fakultet Univerziteta u Beogradu, Beograd, 2003.

Abaco Мachines USA, http://www.abacomachines.com, accessed 30th August 2016.

B. Žegarac, S. Stanković, M. Jovanović Popović, i S. Dimić, Savremane fasade obložene kamenom, Arhitektonski fakultet Univerziteta u Beogradu, Beograd, 1995.

Tabaš d.o.o., http://www.tabas.rs, accessed 30th August 2016.

N. Bilbija i V. Matović, Primenjena petrografija: Svojstva i primene kamena, Građevinska knjiga Beograd, 2009.

B. Crnković i Lj. Šarić, Građenje prirodnim kamenom, UPI.2M PLUS, Zagreb, 2012.

J. J. Kim and B. Rigdon, Sustainable Architecture Module: Qualities, Use, and Examples of Sustainable Building Materials, National Pollution Prevention Center for Higher Education, University Ave, Ann Arbor, 1998, http://www.umich.edu/~nppcpub/resources/compendia/ARCHpdfs/ARCHsbmIntro.pdf, accessed 30th August 2016.

I. Ignjatović, N. Tošić, S. Marinković, i J. Dragaš, "Tehnološki i ekonomski aspekt proizvodnje agregata od recikliranog betona u Srbiji", u Građevinski materijali u savremenom graditeljstvu, Author, Еd. Beograd: Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, 2015, str. 31-38.

R. E. Smith, Prefab Arhitecture: A guide to Modular Design and Construction, John Wiley & Sons, New Jersey, 2010.

D. Đorđević, Značaj i uloga provetravanog omotača zgrade u korelaciji mikro i makro klimatskih faktora, Doktorska disertacija, Arhitektonski fakultet Univerziteta u Beogradu, 1990.


Refbacks

  • There are currently no refbacks.


ISSN 0354-4605 (Print)
ISSN 2406-0860 (Online)
COBISS.SR-ID 98807559