VOLTAGE SAG SENSITIVITY OF INDUSTRIAL VECTOR CONTROLLED INDUCTION MOTOR DRIVES – A COMPARATIVE STUDY

Milutin Petronijević, Boban Veselić, Nebojša Mitrović, Vojkan Kostić

DOI Number
-
First page
167
Last page
183

Abstract


Sensitivity of adjustable speed drives (ASDs) on voltage sag events represents one of the most challenging problems in modern industrial facilities. In this paper, a comprehensive experimental verification of vector-controlled ASDs is conducted under the most-frequent sag types. The obtained results are faced with static and dynamic requirements in speed and torque controlled applications. Besides influence of DC-link parameters, selection of the applied control method and the controller settings can have crucial impact on performance deterioration. Examined industrial ASDs exhibited voltage sag susceptibility with fault error codes under the deeper voltage sags, while under the voltage sags with residual voltage above under-voltage limit they showed speed degradation.

Keywords

power quality, voltage sag, adjustable speed drives, field oriented control, comparative study.

Full Text:

PDF

References


M. H. Bollen, I. Gu, Signal Processing of Power Quality Disturbances, Wiley-IEEE Press: Hoboken, NJ, USA, 2006.

Electromagnetic compatibility (EMC), Part 4: Testing and measurement techniques, Section 34: Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase, IEC 61000-4-34:2005+A1:2009, International Electro-technical Commission, 2009.

Electromagnetic compatibility (EMC), Part 4: Testing and measurement techniques, Section 11: Voltage dips, short interruptions and voltage variations immunity tests, IEC Standard 61000-4-11, International Electro-technical Commission, March 2004.

S. Z. Djokic, K. Stockman, J. V. Milanovic, J. J. M. Desmet, R. Belmans, “Sensitivity of AC adjustable speed drives to voltage sags and short interruptions,” IEEE Transaction on Power Delivery, vol. 20, no. 1, pp. 494-505, 2005. [Online]. Available: http://dx.doi.org/10.1109/TPWRD.2004.832353

M. Petronijevic, B. Veselic, N. Mitrovic, V. Kostic, B. Jeftenic, “Comparative study of unsymmetrical voltage sag effects on adjustable speed induction motor drives,” IET Electric Power Applications, vol. 5, no. 5, pp. 432-442, 2011. [Online]. Available: http://dx.doi.org/10.1049/iet-epa.2010.0144.

K. Lee, T. M. Jahns, W. E. Berkopec, T. A. Lipo, “Closed-form analysis of adjustable-speed drive performance under input-voltage unbalance and sag conditions,” IEEE Transaction on Industry Applications, vol. 42, no. 3, pp. 733–741, 2006. [Online]. Available: http://dx.doi.org/10.1109/TIA.2006.872953.

K. Stockman, F. D' hulster, J. Desmet, R. J. M. Belmans, “Torque behaviour of a RFO induction motor drive under voltage sag conditions,” in Proceedings of 10th International Conference on Harmonics and Quality of Power ICHQP 2002, Rio de Janeiro, Brazil, pp. 359-364, vol. 2002. [Online]. Available: http://dx.doi.org/10.1109/ICHQP.2002.1221460

M. Petronijević, N. Mitrović, V. Kostić, B. Banković, “An Improved Scheme for Voltage Sag Override in Direct Torque Controlled Induction Motor Drives,” Energies, vol. 10, no. 5, pp. 663, 2017. [Online]. Available: http://dx.doi.org/10.3390/en10050663

S. C. Vegunta, J. V. Milanović, S. Ž. Djokić, "Modelling of V–Hz and vector controlled ASDs in PSCAD/EMTDC for voltage sag studies." Electric Power Systems Research, vol. 80, no. 1, pp. 1-8, 2010. [Online]. Available: https://doi.org/10.1016/j.epsr.2009.07.015

S. Bogarra, L. Monjo, J. Saura, F. Córcoles, J. Pedra, "Comparison of simplified models for voltage-source-inverter-fed adjustable-speed drive during voltage sags when the during-event continue mode of operation is active," IET Electric Power Applications, vol. 8, no. 9, pp. 329-341. [Online]. Available: http://dx.doi.org/10.1049/iet-epa.2013.0323

International Electro-technical Commission: ‘Electromagnetic Compatibility (EMC), Part 4: Testing and Measurement Techniques, Section 30: Power Quality Measurement Techniques’. IEC Standard 61000-4-30, 2003.

IEEE Recommended Practice for Monitoring Electric Power Quality, IEEE Std. 1159-1995, 2009

M. Bollen, M. Stephens, S. Djokic, K. Stockman, B. Brumsickle, J. Milanovic, J. R. Gordón, R. Neumann, G. Ethier, F. Corcoles, A. Ferguson, P. Goossens, P. Ligot, A. L. Leiria, P. Marteyn, A. McEachern, J. Mentzer, I. McMichael, U. Minnaar, K. van Reusel, F. Zavoda, “Voltage dip immunity of equipment and installations,” CIGRE/CIRED/UIE Joint Working Group C4.110, pp. 1–279, Apr. 2010.

S. Arias-Guzman, O. A. Ruiz-Guzman, L. F. Garcia-Arias, M. Jaramillo-Gonzales, P. D. Cardona-Orozco, A. J. Ustariz-Farfan, E. A.Cano-Plata, A. F. Salazar-Jimenez, “Analysis of Voltage Sag Severity Case Study in an Industrial Circuit,” IEEE Transaction on Industry Applications, vol, 53, no. 1, pp. 15-21, 2017. [Online]. Available: 10.1109/TIA.2016.2603470

S. Rinaldi, D. D. Giustina, P. Ferrari, A. Flammini, “Distributed monitoring system for voltage dip classification over distribution grid,” Sustainable Energy, Grids and Networks, vol. 6, pp. 70-80, 2016. [Online]. Available: https://doi.org/10.1016/j.segan.2016.02.004

A. dos Santos, M. T. C. de Barros, "Voltage sags tolerance and responsibility curves," in Proceedings of IEEE Eindhoven PowerTech 2015, Eindhoven, Holland, 2015, pp. 1-6.

T. Wymann, P. Jörg, "Power loss ride-through in a variable speed drive system," in Proceedings of Petroleum and Chemical Industry Conference Europe PCIC 2014, Amsterdam, Holland, 2014, pp. 1-9.

Y. Yang, F. Blaabjerg, Z. Zou, “Benchmarking of Voltage Sag Generators,” in Proceedings of the 38th Annual Conference of the IEEE Industrial Electronics Society, Montreal, Canada, 2012, pp. 943-948.

Siemens, "Sinamics S120 function manual drive functions," User`s manual, 07/2016. [Online]. Available: https://support.industry.siemens.com

Danfoss, "Programming Guide VLT AutomationDrive FC301/302," User`s manual, 2017. [Online]. Available: http://drives.danfoss.com

Schneider Electric "Altivar 71 Variable speed drives for asynchronous motors," User`s manual, 2006. [Online]. Available: http://www2.schneider-electric.com




DOI: https://doi.org/10.22190/FUACR1702167P

Refbacks

  • There are currently no refbacks.


Print ISSN: 1820-6417
Online ISSN: 1820-6425