LOAD PATH VISUALIZATION USING U* INDEX AND PRINCIPAL LOAD PATH DETERMINATION IN THIN-WALLED STRUCTURES

Shengjie Zhao, Luyue Mao, Nan Wu, Sviatoslaw Karnaoukh

DOI Number
10.22190/FUME211105006Z
First page
Last page

Abstract


U* index is used to express the load transfer inside a structure from a global perspective. Typically, a load path is defined as the ridgeline of the U* contours. However, it is cumbersome to directly locate the load paths by numerical approaches. This paper presents a streamline method with the fourth-order Runge-Kutta algorithm to visualize the load paths in thin-walled structures. The load paths can be consistently plotted on the surfaces of two-dimensional plates or three-dimensional shells by path projection. A new concept of principal load path is also introduced by evaluating the importance of load paths using statistical means. The principal load path is conceived as the “spine” of the structure that transfers the greatest internal force. A case study of a simplified vehicle body is presented. It is found that the structural stiffness can be greatly improved by reinforcing the set of principal load paths, which gives engineers an important insight into the development of weight-efficient structures.

Keywords

Load Path, Finite Element Analysis, Thin-walled Structures, Runge-Kutta Method

Full Text:

PDF

References


Rama, G., Marinkovic, D., Zehn, M., 2018, High performance 3-node shell element for linear and geometrically nonlinear analysis of composite laminates, Composites Part B: Engineering, 151, pp. 118-126.

Kelly, D.W., Elsley, M., 1995, A procedure for determining load paths in elastic continua, Eng. Comput., 12, pp. 415-424.

Kelly, D.W., Tosh, M.W., 2000, Interpreting load paths and stress trajectories in elasticity, Eng. Comput., 17, pp. 117-135.

Kelly, D.W., Hsu, P., Asudullah, M., 2001, Load paths and load flow in finite element analysis, Eng. Comput., 18, pp. 303-313.

Naito, T., Kobayashi, H., Urushiyama, Y., Takahashi, K., 2011, Introduction of new concept U* sum for evaluation of weight-efficient structure, SAE International Journal of Passenger Cars-Electronic and Electrical Systems, 4, pp. 30-41.

Harasaki, H., Arora, J. S., 2001, New concepts of transferred and potential transferred forces in structures, Comput. Methods Appl. Mech. Eng., 191, pp. 385-406.

Harasaki, H., Arora, J., 2002, Topology design based on transferred and potential transferred forces, Structural and Multidisciplinary Optimization, 23, pp. 372-381.

Harasaki, H., Arora, J., 2001, A new class of evolutionary methods based on the concept of transferred force for structural design, Structural and Multidisciplinary Optimization, 22, pp. 35-56.

Marhadi, K., Venkataraman, S., 2009, Comparison of quantitative and qualitative information provided by different structural load path definitions, International Journal for Simulation and Multidisciplinary Design Optimization, 3, pp. 384-400.

Zhao, S., Wu, N., Wang, A.Q., 2021, Load path-guided fiber trajectory in composite panels: A comparative study and a novel combined method, Compos. Struct., 263, 113689.

Sakurai, T., Tanaka, J., Otani, A., Zhang, C., Takahashi, K., 2003, Load Path Optimization and U* Structural Analysis for Passenger Car Compartments under Frontal Collision, SAE Technical Paper Series, No. 2003-01-2734.

Takahashi, K., 1986, Relative Rigidity of Structures and Saint Venant's Principle, Japan Society of Mechanical Engineers, 52, pp. 2615-2621.

Pejhan, K., Wang, Q., Telichev, I., 2015, Experimental study of U* index response to structural and loading variations, ASME International Mechanical Engineering Congress and Exposition: American Society of Mechanical Engineers, V009T012A010.

Pejhan, K., Telichev, I., Wu, C.Q., Wang, Q., 2017, Experimental validation of the U* index theory for load transfer analysis, Int. J. Heavy Veh. Syst., 24, pp. 288-304.

Wang, Q., Pejhan, K., Telichev, I., Wu, C.Q., 2018, Demonstration of the effectiveness of U*-based design criteria on vehicle structural design, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 232, pp. 995-1002.

Honda, M., Akima, S., Omiya, M., Takahashi, K., Sakurai, T., Maki, T., Nakagawa, K., 2018, Optimization of Vehicle Body Local Structure Using Load Transfer Ustar (U*) Calculation, Transactions of Society of Automotive Engineers of Japan, 49.6.

Suzuki, T., Fukushige, S., Tsunori, M., 2020, Load path visualization and fiber trajectory optimization for additive manufacturing of composites, Addit. Manuf., 31, 100942.

Zhao, S., Wu, N., Wang, Q., 2020, Novel Damage Detection Tool Based on Load Path Analysis Using Ustar (U*), IEEE Access, pp. 82607-82616.

Wu, F., Wang, Z., Song, D., Liang, H., 2022, Lightweight design of control arm combining load path analysis and biological characteristics, Reports in Mechanical Engineering, 3, pp. 71-82.

Wang, E.Y., Nohara, T., Ishii, H., Hoshino, H., Takahashi, K., 2011, Load Transfer Analysis Using Indexes U* and U** for Truck Cab Structures in Initial Phase of Frontal Collision, Advanced Materials Research, 156, pp. 1129-1140.

Wang, Q., Pejhan, K., Telichev, I., Wu, C.Q., 2017, Extensions of the U* theory for applications on orthotropic composites and nonlinear elastic materials, Int. J. Mech. Mater. Des., 13(3), pp. 469-480.

Naito, T., Kobayashi, H., Urushiyama, Y., Takahashi, K., 2011, Introduction of new concept U*sum for evaluation of weight-efficient structure, SAE Int. J. Passeng. Cars Electron. Electr. Syst., 4, pp. 30-41.

Wang, Q., Telichev, I., Wu, C.Q., 2018, A new load transfer index (U*M) with considering six degrees of freedom and its application in structural design and analysis, Mechanics Based Design of Structures and Machines, 46, pp. 410-424.

Sakurai, T., Takahashi, K., Kawakami, H., Abe, M., 2007, Reduction of calculation time for load path U* analysis of structures, J. solid mech. mater. eng., 1, pp. 1322-1330.

Wang, Q., Zhang, G., Sun, C., Wu, N., 2019, High efficient load paths analysis with U* index generated by deep learning, Comput. Methods Appl. Mech. Eng., 344, pp. 499-511.

Zhao, S., Wu, N., Wang, Q., 2020, Deep residual U-net with input of static structural responses for efficient U* load transfer path analysis, Adv. Eng. Inform., 46, 101184.

Tamijani, A.Y., Hurley, J., Gharibi, K., 2018, Determination of load paths in plates and shells, Thin-Walled Structures, 127, pp. 646-653.

Tamijani, A.Y., Gharibi, K., Kobayashi, M.H., Kolonay, R.M., 2018, Load paths visualization in plane elasticity using load function method, International Journal of Solids and Structures, 135, pp. 99-109.

Giles, M., Haimes, R., 1990, Advanced interactive visualization for CFD, Computing Systems in Engineering, 1, pp. 51-62.

Kelly, D., Pearce, G., Schroder-Turner, K., 2019, Plotting Load Paths from Finite Element Stress Results for Aerospace Structures, AIAA Scitech 2019 Forum, 0509

Kelly, D., Reidsema C., Bassandeh, A., Pearce, G., Lee, M., 2011, On interpreting load paths and identifying a load bearing topology from finite element analysis, Finite Elements in Analysis and Design, 47, pp. 867-876.

Kelly, D.W., Reidsema C.A., Lee, M.C.W., 2011, An algorithm for defining load paths and a load bearing topology in finite element analysis, Eng. Comput. (Swansea), 28, pp. 196-214.


Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4