NOVEL SMART DESIGN OF REAR HALF SHAFT OF LARGE URBAN TRANSPORT VEHICLE

Fabio Alberti, Danilo D'Andrea, Alarico Macor, Giacomo Risitano, Antonio Rosseti, Aleksandar Sedmak

DOI Number
10.22190/FUME240203027A
First page
Last page

Abstract


New design method of rear half shaft of a large urban transport vehicle with a conventional (Power Shift) and hydro-mechanical (Power Split) transmission is presented. The so-called Smart Design is based on the automatic cumulative fatigue damage determination combining the Rainflow method and Palmgren-Miner rule. Previous study, comparing the Power Shift transmission with other alternatives, clearly demonstrated that the Power Split transmission offers significant advantages in terms of pollutant emissions and fuel consumption, making it a better choice for the ecological transition. Anyhow, from a mechanical point of view, the results of this work show that the load condition of the hydro-mechanical Power Split transmission reduce significantly the fatigue life of a component initially designed for a conventional transmission.

Keywords

Large urban transport vehicle, Power Split/Shift transmission, Smart design, Cumulative fatigue damage

Full Text:

PDF

References


Apparicio, P., Gelb, J., Carrier, M., Mathieu, M.È., Kingham, S., 2018, Exposure to noise and air pollution by mo¬de of transportation during rush hours in Montreal, J Transp Geogr, 70, pp. 182–92.

Reis, S, Cowie, H., Riddell, K., Steinle, S., Apsley, A., 2013, Urban air quality citizen science Phase 1 : Review of methods and projects.

Kim, M., Chang, S.I., Seong, J.C., Holt, J.B., Park, T.H., Ko, J.H., Croft, J.B., 2012, Road traffic noise. Handb Highw Eng, 43(4), pp. 353-360.

Liu, X., Sun, D., Qin, D., Liu, J., 2017, Achievement of fuel savings in wheel loader by applying hydrodynamic mechanical power split transmissions, Energies, 10(9), 1267.

Rossetti, A., Macor, A., Benato, A., 2017, Impact of control strategies on the emissions in a city bus equipped with power-split transmission, Transp Res Part D Transp Environ, 50, pp. 357–371.

Nyhan, M., Sobolevsky, S., Kang, C., Robinson, P., Corti, A., Szell, M., et al., 2016, Predicting vehicular emissions in high spatial resolution using pervasively measured transportation data and microscopic emissions model, Atmos Environ, 140, pp. 352–363.

Luo, X., Dong, L., Dou, Y., Zhang, N., Ren, J., Li, Y., et al., 2017, Analysis on spatial-temporal features of taxis’ emissions from big data informed travel patterns: a case of Shanghai, China. J Clean Prod, 142, pp. 926–935.

Saboohi, Y., Farzaneh, H., 2009, Model for developing an eco-driving strategy of a passenger vehicle based on the least fuel consumption, Appl Energy, 86, pp. 1925–1932.

Sun, X., Li, Z., Wang, X., Li, C., 2020, Technology Development of Electric Vehicles: A Review, Energies, 13(1), 90.

Sanguesa, J.A., Torres-sanz, V., Garrido, P., Martinez, F.J., Marquez-barja, J.M., 2021, A Review on Electric Vehicles : Technologies and Challenges, Smart Cities, 4(1), pp. 372–404.

Pelletier, S., Jabali, O., Laporte, G., Veneroni. M., 2017, Battery degradation and behaviour for electric vehicles : Review and numerical analyses of several models, 103, pp. 158–187.

Almouhanna, A., Quintero-araujo, C.L., Panadero, J., Juan, A.A., Khosravi, B., Ouelhadj, D., 2020, Computers and Operations Research The location routing problem using electric vehicles with constrained distance. Comput Oper Res, 115, 104864.

Andrea, D.D., Risitano, G., Alberti, F., 2022, Fuel Consumption Reduction and Efficiency Improvement in Urban Street Sweeper Using Power Split with Lockup Clutch Transmission. Appl. Sci. 12(19), 10160

Alberti, F., Foti, P., Berto, F., Risitano, G., D’Andrea, D., 2022, Fatigue life evaluation of automotive mechanical components by using smart design algorithm, Fatigue Fract Eng Mater Struct, 46(4), pp. 1401–1412.

Zheng, B., Fu, S., Lei, J., 2022, Topology Optimization and Multiobjective Optimization for Drive Axle Housing of a Rear Axle Drive Truck, Materials, 15(15), 5268.

Asi, O., 2006, Fatigue failure of a rear axle shaft of an automobile, Eng Fail Anal, 13, pp. 1293–1302.

Decker, M., Savaidis, G., 2002, Measurement and analysis of wheel loads for design and fatigue evaluation of vehicle chassis components, Fatigue Fract Eng Mater Struct, 25, pp. 1103–1119.

Wu, W., Luo, J., Wei, C., Liu, H., Yuan, S., 2020, Design and control of a hydro-mechanical transmission for all-terrain vehicle, Mechanism and Machine Theory, 154, 104052,

Bayrakceken, H., Tasgetiren, S., Yavuz, I., 2007, Two cases of failure in the power transmission system on vehicles: A universal joint yoke and a drive shaft, Eng Fail Anal, 14, pp. 716–724.

Barone, C., Casati, R., Dusini, L., Gerbino, F., Guglielmino, E., Risitano, G., et al., 2018, Fatigue life evaluation of car front halfshaft. Procedia Struct Integr, 12, pp. 3–8.

MacOr, A., Rossetti, A., 2013, Fuel consumption reduction in urban buses by using power split trans¬missions. Energy Convers Manag, 71, pp. 159–171.

Previti, U., Galvagno, A., Risitano, G., Alberti, F., 2022, Smart Design: Application of an Automatic New Methodology for the Energy Assessment and Redesign of Hybrid Electric Vehicle Mechanical Components. Vehicles, 4, pp. 586–607.

Singh, K., Sadeghi, F., Correns, M., Blass, T., 2019, A microstructure based approach to model effects of surface roughness on tensile fatigue, Int J Fatigue, 129, 105229.

Marsh, G., Wignal, C., Thies, P.R., Barltrop, N., Incecik, A., Venugopal, V., Johanning, L., 2016, Review and application of Rainflow residue processing technique for accurate fatigue damage estimation, Int J Fatigue, 82, pp. 757–765.

Gujar, R.A., Bhaskar S.V., 2013, Shaft design under fatigue loading by using modified Goodman criterion, IJERA, 3, pp. 1061-1066.

Dikmen, F., Bayraktar, M., Guclu, R., 2012, Railway axle analyses: Fatigue damage and life analysis of rail vehicle axle. Stroj Vestnik/Journal Mech Eng, 58, pp. 545–552.

Weber, F., Wu, H., Starke, P., 2023, A new short-time procedure for fatigue life evaluation based on linear damage accumulation by Palmgren-Miner, Int J Fatigue, 172, 107653.

Duffner, D.H., 2006, Torsion fatigue failure of bus drive shafts, J Fail Anal Prev, 6, pp. 75–82.

Starke, P., Walther, F., Eifler, D., 2009, New fatigue life calculation method for quenched and tempered steel SAE 4140, Mater Sci Eng A, 523, pp. 246–252.

Niesłony, A., Dsoki, C., Kaufmann, H, Krug, P., 2008, New method for evaluation of the Manson-Coffin-Basquin and Ramberg-Osgood equations with respect to compatibility, Int J Fatigue, 30, pp. 1967–1977.


Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4