ON INFLUENCE OF BOUNDARY CONDITIONS AND TRANSVERSE SHEAR ON BUCKLING OF THIN LAMINATED CYLINDRICAL SHELLS UNDER EXTERNAL PRESSURE

Gennadi I. Mikhasev, Ihnat R. Mlechka

DOI Number
-
First page
95
Last page
106

Abstract


Buckling of a thin cylindrical sandwich shell composed of elastic isotropic layers with different elastic properties under normal external pressure is the subject of this investigation. Differential equations based on the assumptions of the generalized kinematic hypothesis for the whole sandwich are used as the governing ones. Two variants of the joint support conditions are considered at the shell edges: a) there are the infinite rigidity diaphragms inhibiting relative shears of layers along the shell edges, b) the diaphragms are absent. Using the asymptotic approach, the critical pressure and buckling modes are constructed in the form of the superposition of functions corresponding to the main stress-strain state and the edges integrals. As an example, a three-layered cylinder with the magnetorheological elastomer (MRE) embedded between elastic layers under different levels of magnetic field is studied. Physical properties of the magnetorheological (MR) layer are assumed to be functions of the magnetic field induction. Dependencies of the buckling pressure on the variant of boundary conditions and the intensity of applied magnetic field are analyzed.

Full Text:

PDF

References


Qatu, M.S., Sullivan, R.W., Wang, W., 2010, Recent research advances on dynamic analysis of composite shells: 200-2009, Composite Structures, 93, pp. 14-31.

Librescu, L, Hause, T., 2000, Recent developments in the modeling and behavior of advanced sandwich constructions: a survey, Composite Structures, 48, pp. 1-17.

Tovstik, P.E, Smirnov, A.L., 2001, Asymptotic methods in the buckling theory of elastic shells. Singapore: World Scientific.

Grigolyuk, E.I, Kulikov, G.M., 1988, Multilayer Reinforced Shells: Calculation of Pneumatic Tires. Moscow: Mashinostroenie, 288 p. [in Russian].

Korchevskaya, E., Mikhasev, G., Marinkovich, D., Gabbert, U., 2003, Buckling and vibrations of composite laminated cylindrical shells under axial load, In: Kasper R., editor. Entwicklungsmethoden und Entwicklunsprozesse im Maschinenbau: 6 Magdeburger Maschinenbau-Tage. Berlin: Logos-Verlag, pp. 183-189.

Mikhasev, G., Seeger, F., Gabbert, U., 2001, Local buckling of composite laminated cylindrical shells with oblique edges under external pressure: Asymptotic and finite element simulation, Technische Mechanik, 21(1), pp. 1-12.

Deng, H-X, Gong, X-L, 2008, Application of magnetorheological elastomer to vibration absorber, Communications in Nonlinear Science and Numerical Simulation,13, pp.1938–1947.

Gibson, R.F., 2010, A review of recent research on mechanics of multifunctional composite materials and structures, Composite Structures, 92, pp. 2793- 2810.

Korobko, E.V, Mikhasev, G.I, Novikova, Z.A., Zurauski, M.A., 2012, On damping vibrations of three-layered beam containing magnetorheological elastomer. Journal of Intelligent Material Systems and Structures, 23(9), pp. 1019–1023.

Yeh, J-Y., 2013, Vibration analysis of sandwich rectangular plates with magnetorheological elastomer damping treatment. Smart Material Structures, 22, 035010.

Mikhasev, G.I., Botogova, M.G., Korobko, E.V., 2011, Theory of thin adaptive laminated shells based on magnetorheological materials and its application in problems on vibration suppression. In: Altenbach H, Eremeyev VA, editors. Shell-like Structures. Advanced structured materials, vol. 15. Berlin: Springer, pp. 727–750.

Mikhasev, G.I., Altenbach, H., Korchevskaya, E., 2014, On the influence of the magnetic field on the eigenmodes of thin laminated cylindrical shells containing magnetorheological elastomer, Composite Structures, 113, pp. 186-196.


Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4