THE MONOSPIRAL MOTORISED CABLE REEL IN CRANE APPLICATIONS

Vojkan Kostić, Nebojša Mitrović, Bojan Banković, Milutin Petronijević

DOI Number
10.22190/FUME170508015K
First page
315
Last page
330

Abstract


The main consideration of any reeling system is the effect it has on cable tensions and hence cable life. This paper explains the relationship of reel torque to cable tensions and the reasons why this relationship is so important. Such system is characterized by variable parameters, primarily a variable moment of inertia and a variable diameter of the coiled cable. For these reasons, in order to ensure proper dimensioning of the drive, it is necessary to know the motor torques that need to be developed as a function of the coiled cable. The motor should be able to develop the required torques in a very wide speed range. It is shown that for properly sizing the motor it is necessary take into account the dynamics of the cable reel drive. In this paper monospiral motorized cable reel for winding power cable in crane applications with frequency converter fed induction motor is analyzed. Also, the equipment selection procedure for the real crane with concrete data is shown. Experimental results are recorded during the crane commissioning in real condition.

Keywords

Induction Motor Drive, Cable Reel, Frequency Converter, Tension Control

Full Text:

PDF

References


Chattopadhyay, A.K., 2010, Alternating Current Drives in the Steel Industry, IEEE Industrial Electronics Magazine, 4(4), pp. 30-42.

Mitrović, N., Kostić, V., Petronijević, M., Jeftenić, B., 2009, Multi-Motor Drives for Crane Application, Advances in Electrical and Computer Engineering, 9(3), pp. 57-62.

Niu, C.M., Zhang, H.W., Ouyang, H., 2012, A Comprehensive Dynamic Model of Electric Overhead Cranes and the Lifting Operations, Proc. of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226(6), pp. 1484-1503.

Kostić, V., Mitrović, N., Petronijević, M., Banković, B., 2011, Experimental Analysis of Direct Torque Control Methods for Electric Drive Application”, Proc. forty-sixth International Scientific Conference on Information, Communication and Energy System and Technologies ICEST 2011, Niš, PO8.9, 3, pp. 997-1000.

Yogesh, N.T., Mohan, V.A., 2016, Direct Torque Control of Induction Motor with Common-Mode Voltage Elimination, Electric Power Components and Systems, 44(20), pp. 2310-2324.

Haiwei, L., Weijian, M., Ning, Z., Yufei, F., 2015, Modeling and Simulating the Operation of the Harbor Portal Crane, Journal of Coastal Research, Special Issue 73 - Recent Developments of Port and Ocean Engineering, pp. 89-94.

Mitrović, N., Petronijević, M., Kostić, V., Jeftenić, B., 2012, Electrical Drives for Crane Application, Mechanical Engineering, Dr. Murat Gokcek (Ed.), InTech, pp. 131-156.

Pietrosanti, S., Harrison, I., Luque, A., Holderbaum, W., Becerra, V.M., 2016, Net Energy Savings in Rubber Tired Gantry Cranes Equipped with an Active Front End, IEEE 16th International Conference on Environment and Electrical Engineering EEEIC 2016, Florence, pp. 1-5.

Mitrović, N., Kostić, V., Petronijević. M., Jeftenić B., 2010, Practical Implementation of Load Sharing and Anti Skew Controllers for Wide Span Gantry Crane Drives, Strojniški vestnik – Journal of Mechanical Engineering, 56(3), pp. 207-216.

Beldjajev, V., Lehtla, T., Mõlder, H., 2010, Influence of Regenerative Braking to Power Characteristics of a Gantry Crane, Proc. Electric Power Quality and Supply Reliability Conference 2010, Kuressaare, pp. 73-78.

Iannuzzi, D., Piegari, L., Tricoli, P., 2009, Use of Supercapacitors for Energy Saving in Overhead Travelling Crane Drives, Proc. International Conference on Clean Electrical Power ICCEP 2009, Capri, pp. 562-568.

Hearn, C.S., Lewis, M.C., Prarap, S.B., Hebner, R.E., Uriate, F.M., Chen, D.M., Longoria, R.G., 2013, Utilization of Optimal Control Law to Size Gride-Level Flywheel Energy Storage, IEEE Transactions on Sustainable Energy, 4(3), pp. 611-618.

Andziulis, A., Eglynas, T., Bogdevicius, M., Jusis, M., Senulis, A., 2016, Multibody Dynamic Simulation and Transient Analysis of Quay Crane Spreader and Lifting Mechanism, Advances in Mechanical Engineering, 8(9), pp. 1-11.

Vasiljević, R., Gašić, M., Savković, M., 2016, Parameters Influencing the Dynamic Behaviour of the Carrying Structure of a Type H Portal Crane, Strojniški vestnik - Journal of Mechanical Engineering, 62(10), pp. 591-602.

Marinković, Z., Marinković, D., Petrović, G., Milić, P., 2012, Modelling and Simulation of Dynamic Behaviour of Electric Motor Driven Mechanisms, Tehnicki vjesnik/Technical Gazette, 19(4), pp. 717-725.

Precup, R.E., Filip, H.I., Rădac, M.B., Petriu, E.M., Preitl, S., Dragoş, C.A., 2014, Online Identification of Evolving Takagi–Sugeno–Kang fuzzy Models for Crane Systems, Applied Soft Computing, 24, pp. 1155-1163.

Huang, J., Xie, X., Liang, Z., 2015, Control of Bridge Cranes with Distributed-Mass Payload Dynamics, IEEE/ASME Transactions on Mechatronics, 20(1), pp. 481-486.

Sun N, Fang Y, Chen H.A, 2016, Continuous Robust Antiswing Tracking Control Scheme for Underactuated Crane Systems with Experimental Verification, ASME, Journal of Dynamic System, Measurement and Control, 138(4), pp. 041002-1 - 041002-12.

Gholabi, A., Ebrahimi, M., Reza, G., Ghayour, Y.M., Ebrahimi, A., Jali, H., 2013, Sensorless Anti-Swing Control for Overhead Crane Using Voltage and Current Measurements, Journal of Vibration and Control, 21(9), pp. 1745-1756.

Subari, H., Chong, S.H., Hee, W.K., Chong, W.Y., Nawawi, M.R., Othman, M.N., 2015, Investigation of Model Parameter Variation for Tension Control of a Multi Motor Wire Winding System, Proc. 10th Asian Control Conference ASCC 2015, Kota Kinabalu, pp. 1-6.




DOI: https://doi.org/10.22190/FUME170508015K

Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4