Hui Cao, Yu Tian, Yonggang Meng

DOI Number
First page
Last page


Adhesive wear is one of the four major wear mechanisms and very common in almost all macro-, micro- or nanotribosystems. In an adhesive wear process, tiny material fragments are pulled off from one sliding surface and adhered onto the counterpart. Later these fragments form loose particles or transfer between the contact surfaces. Because of the topographical and physicochemical property non-uniformity of engineering surfaces, adhesive wear happens heterogeneously on the loaded sliding surfaces, and it is also discontinuous during sliding or rolling motion owing to the damage accumulation and fracture occurred inside the subsurface layers. Taking account of these characteristics, a novel fracture-induced adhesive wear criterion has been proposed in this study in order to predict local wear of material in sliding. Moreover, the proposed wear criterion is applied to predicting wear particle formation and morphology evolution of mixed lubricated rough surfaces during reciprocating sliding, and the simulation results are compared with the ball-on-disk experimental measurements.


Adhesive wear, Criterion, Mixed lubrication, Surface energy, Wear particles

Full Text:



Harris, T.A., Kotzalas, M.N., 2007, Rolling Bearing Analysis (5th Edition): Advanced Concepts of Bearing Technology, Taylor & Francis.

Erdemir, A., Martin, J.M., Luo, J., 2020, Pradeep, N., Superlubricity (2nd Edition), Elsevier.

Zhang, Y., Kovalev, A., Meng, Y., 2018, Combined effect of boundary layer formation and surface smoothing on friction and wear rate of lubricated point contacts during normal running-in processes, Friction, 6, pp. 274–288.

Zhao, D., Lu, X., Molinari, J.F., 2013, Chemical mechanical polishing: theory and experiment, Friction, 1, pp. 306-326.

Holm, R, 1946, Electric Contacts: Theory and Applications, Stockholm.

Meng, H.C., Ludema, K.C., 1995, Wear models and predictive equations: their form and content, Wear, 181-183, pp. 443-457.

Rhee, S.K., 1970, Wear equation for polymers sliding against metal surfaces, Wear, 16, pp. 431-445.

Archard, J.F., 1953, Contact and rubbing of flat surfaces, J. Applied Phys., 24, pp. 981-988.

Rabinowicz, E., 1961, Influence of surface energy on friction and wear phenomena, J. Applied Phys., 32, pp. 1440-1444.

Rabinowicz, E., 1964, Practical uses of the surface energy criterion, Wear, 7, pp. 9-22.

Suh, N.P., 1973, The delamination theory of wear, Wear, 25, pp. 111-124.

Quinn, T., 1971, Oxidational wear, Wear, 18, pp. 413-419.

Carpick R. W., Salmeron M., 1997, Scratching the surface: Fundamental investigations of tribology with atomic force microscopy, Chem Rev, 97, pp.1163-1194.

Greer, J.R., Nix, W.D., 2005, Size dependence of mechanical properties of gold at the sub-micron scale, Applied Physics A, 80, pp. 1625-1629.

Gotsmann, B., Lantz, M.A., 2008, Atomistic wear in a single asperity sliding contact, Phys Rev Lett, 101, pp.125501.

Hase, A., Mishina, H., 2009, Wear elements generated in the elementary process of wear, Tribology International, 42, pp. 1684-1690.

Vargonen, M., Yang, Y.J., Huang, L.P., Shi, Y.F., 2013, Molecular simulation of tip wear in a single asperity sliding contact, Wear, 307, pp. 150-154.

Aghababaei, R., Warner, D.H., Molinari, J.F., 2016, Critical length scale controls adhesive wear mechanisms, Nature. Communications, 7, 11816.

Yu, D., Wang, J., Ma, M., Meng, Y., 2020, Effect of surface energy on shearing of metal asperities contact at nanoscale, The Journal of Physical Chemistry C, 124, pp. 27436-27441.

Zhou, C., Beyerlein, I.J., LeSar, R., 2011, Plastic deformation mechanisms of fcc metals as small scales, Acta Materiallia, 59, pp. 7673-7682.

El-Awady, J., 2014, Unravelling the physics of size-dependent dislocation-mediated plasticity, Nature Communications, 6, pp. 5926.

Popov, V., Pohrt, R., 2018, Adhesive wear and particle emission: numerical approach based on asperity-free formulation of Rabinowicz criterion, Friction, 6, pp. 260-273.

Tan, Y., Zhang, L., Hu, Y., 2014, A wear model of plane sliding pairs based on fatigue contact analysis of asperities, Tribology Transactions, 58, pp. 148-157.

Isiet, M., Miskovic, I., Miskovic, S., 2021, Review of peridynamic modelling of material failure and damage due to impact, Intern. J. of Impact Engineering, 147, 103740.

Rabinowicz, E., 1995, Friction and wear of materials, Second Edition, John Wiley & Sons, Inc..

Hu, Y., Zhu, D., 2000, A full numerical solution to the mixed lubrication in point contacts, Journal of Tribology, 122, pp. 481-491.

Suh, N.P., 1977, An overview of the delamination theory of wear, Wear, 44, pp. 39-56.

Popov, V., Gerve, A., Kehrwald, B., et al., 2000, Simulation of wear in combustion engines, Computational Materials Science, 19, pp. 285-291.

DOI: https://doi.org/10.22190/FUME210108021C


  • There are currently no refbacks.

ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4