STRENGTHENING OF REINFORCED CONCRETE BEAM ELEMENTS USING ROD-FORM COMPOSITE MATERIALS

Slobodan Ranković, Radomir Folić, Marina Mijalković, Žarko Petrović

DOI Number
https://doi.org/10.2298/FUACE230630037R
First page
185
Last page
192

Abstract


The paper emphasizes the advantages of using FRP (fiber reinforced polymer) materials for strengthening reinforced concrete structures. The results of experimental research on the effects of strengthened reinforced concrete beam elements exposed mainly to bending using FRP rod-shaped elements are presented. The load disposition (experimental setup) was in accordance with the "four point load" scheme, and the measurements were made using modern measuring techniques. The results regarding the increase in the bearing capacity of strengthened beams using the NSM (near surface mounting) and EB (externally bounding) methods were compared. In particular, the load-deflection ratio until failure was analyzed, as well as the change in stiffness depending on the load level. It has been shown that the load capacity of beams strengthened with carbon fiber rods (NSM CFRP) increases by 89%, and the load capacity of beams strengthened with glass fiber rods (NSM GFRP) by 73%. The bearing capacity of beams strengthened with EB CFRP laminates increases by 51%. The ductility of strengthened beams was analyzed and it was shown that it is higher when using GFRP rod-shaped elements (DI=6.5) compared to CFRP rods (DI=5.3). The ductility of the beams strengthened by the EB CFRP method was not satisfactory (DI=2.6).

Keywords

strengthening, NSM method, FRP reinforcement, testing

Full Text:

PDF

References


American Concrete Institute, Committee 440 "Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures", Farmington Hills, MI, USA, 2017.

Fédération internationale du béton (Fib), Bulletin no. 90 "Externally applied FRP reinforcement for concrete structures". Lausanne, Switzerland, 2019.

Mapei FRP System, www.mapei.com

De Lorenzis, L. and Teng, JG.: “Near-surface mounted FRP reinforcement: an emerging technique for structural strengthening”. Composites: Part B: Engineering, 38, 119–143. (2007)

Firas Al-Mahmoud, Arnaud Castel, Raoul François, Christian Tourneur, “Strengthening of RC members with near-surface mounted CFRP rods”, Composite Structures (2009).

Tang W.C., Balendran R.V., A. Nadeem, H.Y. Leung: “Flexural strengthening of reinforced lightweight polystyrene aggregate concrete beams with near-surface mounted GFRP bars”, Building and Environment 41, 1381–1393, (2006).

Nanni, A.,. “North American Design Guidelines for Concrete Reinforcement and Strengthening Using FRP: Principles, Applications, and Unsolved Issues,” Journal of Construction and Building Materials, Vol. 17, No. 6-7, pp. 439-446. (2003)

Bilotta, A., Ceroni, F., Barros, J. A. O. , Costa, I., Palmieri, A., Szabó Z. K., Nigro, E., Matthys, S., Balaz, G., Pecce, M. "Bond of NSM FRP-Strengthened Concrete: Round Robin Test Initiative", Journal of Composites for Construction, 20(1), pp. 4015026-1–4015026-16, 2016. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000579

Kadhim, M. M. A., Jawdhari, A., Peiris, A. "Evaluation of lap-splices in NSM FRP rods for retrofitting RC members"‚ Structures 30, pp. 877–894, 2021. https://doi.org/10.1016/j.istruc.2021.01.054

Shadravan, B., Tehrani, F. M. "A Review of Direct Shear Testing Configurations for Bond between Fiber-Reinforced Polymer Sheets on Concrete and Masonry Substrates", Periodica Polytechnica Civil Engineering, 61(4), pp. 740–751, 2017, https://doi.org/10.3311/PPci.9090

Taljsten B, Carolin A, Nordin H.: “Concrete structures strengthened with near surface mounted reinforcement of CFRP”, Adv Struct Eng. 6(3):201–213, (2003).

Coelho, M. R. F., Sena-Cruz, J. M., Neves, L. A. C. "A review on the bond behavior of FRP NSM systems in concrete", Construction and Building Materialsn 93(15), pp. 1157–1169, 2015. https://doi.org/10.1016/j.conbuildmat.2015.05.010

Rankovic S., Folić R., Mijalković M.: Efects of RC beams strengthening using near surface reinforced FRP composites, FACTA UNIVERSITATIS,Vol8, N°2, (pp. 177-185). (2010).

Ranković, S., Folić, R., Mijalković, M. "Flexural behaviour of RC beams strengthened with NSM CFRP and GFRP bars – experimental and numerical study", Romanian Journal of Materials, 43 (4), pp. 377–390, 2013.


Refbacks

  • There are currently no refbacks.


ISSN 0354-4605 (Print)
ISSN 2406-0860 (Online)
COBISS.SR-ID 98807559