PERFORMANCE BASED APPROACH IN DESIGN OF FREEFORM SPACE STRUCTURES

Miodrag Nestorović, Predrag Nestorović, Jelena Milošević

DOI Number
-
First page
153
Last page
166

Abstract


This paper is related to the fact that use of computational tools for form generation, analysis and digital fabrication (CAD/CAM/CAE) in an efficient way enables accurate representation of ideas, simulation of diverse impact and production of rational design solutions. Application of geometrical and numerical computational methods and adoption of performance based priorities enables formal exploration in constrained conditions and improvement of architectural engineering design process. Implementation of advanced technologies in 3D digital design process facilitates production of unconventional complex designs, their verification by construction of physiscal models and exparimental diagnostics, as phase preceding construction of real structure. Within this work concept that provides design of non-standard, context-specific, freeform structure using rapid prototyping technology and 3D optical measurement will be reviewed. The analyzed design solution of roof structure above atrium of National Museum in Belgrade has a function to demonstate the effectiveness of this approach.

Keywords

performance based design, freeform, space structures, CAD/CAM/CAE, rapid prototyping, 3D optical measurement

Full Text:

PDF

References


Cucakovic, M. Nestorovic, B. Jovic, "Free Form Structure Surfaces", Proceedings of the 14th International Conference on Geometry and Graphics, Kyoto, Japan, 2010, pp. 330-331.

Kolarevic, Architecture in Digital Age - Design and Manufacturing, New York&London: Spon Press, 2003.

Striech, "3D scanning and 3D-printing for media experimental design work in architecture", ACADIA ’96: Design Computation: Collaboration, Reasoning, Pedagogy, 1996.

F. Rogers, An Introduction to NURBS: With Historical Prospective, USA: Academic Press, 2001.

T. Pham, R. S. Gauit, "A comparison of rapid prototyping technologies", International Journal of Machine Tools and Manufacture 38, 1998, pp. 1257– 1287.

J. Milošević, Z. Šobić, M. Nestorović, "Towards Generative Convergence in Design of Architectural Structures", 1st International Academic Conference Places and Technology, Belgrade: University of Belgrade Faculty of Architecture, 2014., pp. 744-751.

J. P. Kruth, M. C. Leu, T. Nakagawa, "Progress in additive manufacturing and rapid prototyping", CIRP Annals-ManufacturingTechnology, vol. 47, no. 2, 1998, pp. 525–540.

J. Sanches, "Rapid Prototyping and Architecture", Proceedings of Rapid Prototyping Development Conference, RPD 2006, Marinha Grande, Portugal, 2006.

J. Snaches, J. Gonzalez, A. Oyarbide, "Using Rapid Prototyping for Free-from Shapes in Architectural Scale Models", Proceedings of the International Association for Shell and Spatial Structures, IASS 2005, Bucarest, Rumania, 2005.

M, Nestorović, Konstruktivni sistemi - principi konstruisanja i oblikovanja, Beograd: Arhitektonski fakultet Univerziteta u Beogradu, 2000.

M. Nestorović, A. Čučaković, B. Jović, "Geometric Analysis Variant of Free-Form Dome", Proceedings of 3rd International Scientific Conference moNGeometrija, Belgrade, Serbia, 2010.

M. Nestorović, P. Nestorović, J. Milošević, "Rapid Prototyping: Constructing Physical Models of Architectural Geometry", Applied Geometry and Graphics Issue No 91. The Interdepartmental Collection of Proceedings of SED-13, Kyiv: Ukraine Association for Applied Geometry, 2013., pp. 187-192.

N. P. Karapatis, J.-P.S van Griethuysen, R. Glardon, "Direct rapid tooling: a review of current research", Rapid Prototyping Journal vol. 4, no. 2, 1998, pp. 77–89.

T, Maneski, Kompjutersko modeliranje i proračun struktura, Beograd: Mašinski fakultet Univerziteta u Beogradu, 1998.

T. J. R. Huhges, The Finite Element Method: Linear Static and Dynamic Finite Element Analysis, Dover Publications, 2000.

T. Maneski, B. Nestorović, "Validation Numerical Modelling With 3D Optical Measurment Deformations of deformations of foldable plastic packaging buckling failure". Serbian architectural journal (SAJ), Structural Systems, No. 2, 2011, pp. 152–162.

Y. J. Grobman, E. Neuman, Performalisam: Form and Performance in Digital Architecture, New York: Routledge, 2012.


Refbacks

  • There are currently no refbacks.


ISSN 0354-4605 (Print)
ISSN 2406-0860 (Online)
COBISS.SR-ID 98807559