ADAPTATION OF THE FEEDBACK TRANSFER FUNCTION FOR OSICILATION BASED TESTING OF SECOND-ORDER ACTIVE RC FILTERS

Dejan Mirković, Miljana Milić, Milena Stanojlović Mirković

DOI Number
https://doi.org/10.22190/FUACR240501001M
First page
001
Last page
015

Abstract


This paper, explores possible solutions for the feedback transfer functions applied in active RC filters for oscillation-based testing (OBT). Three types of filter transfer functions, namely low-pass (LP), high-pass (HP) and band-pass (BP) are examined. Active filters are realized with the realistic operational amplifier model targeting the 180nm CMOS technology. To confirm the theoretical insights, three realizations of LP, HP, BP second-order filterers with proposed feedbacks are designed and simulated. One of the solutions, namely the BP filter, is further examined by inserting defects in the circuit. Based on the time domain simulations, the key parameters are extracted from the oscillating filter’s output signal. The fault dictionary has been created and appropriate classification of the defects is performed.


Keywords

Feedback loop, active RC filters, transfer function, oscillation-based testing, fault dictionary

Full Text:

PDF

References


G. Q. Zhang, M. Graef, and F. van Roosmalen," The rationale and paradigm of "more than Moore", 56th Electronic Components and Technology Conference 2006, San Diego, CA, USA, 2006, pp. 7, doi: 10.1109/ECTC.2006.1645639.

S. Qamar, W. H. Butt, M. W. Anwar, F. Azam, and M. Q. Khan, "A Comprehensive Investigation of Universal Verification Methodology (UVM) Standard for Design Verification," Proceedings of the 2020 9th International Conference on Software and Computer Applications, 2020, pp. 339–343, doi: 10.1145/3384544.3384547.

M. Karmani, C. Khedhiri, B. Hamdi, and B. Bensalem, "A Fault Dictionary-Based Fault Diagnosis Approach for CMOS Analog Integrated Circuits," International Journal of VLSI Design & Communication Systems, vol. 2, no. 3, 2011, doi: 10.5121/vlsic.2011.2301.

D. Monda, G. Ciarpi, and S. Saponara, "Diagnosis of faults induced by radiation and circuit-level design mitigation techniques: Experience from vco and high-speed driver cmos ics case studies," Electronics (Switzerland), vol. 10, no. 17, 2021, doi: 10.3390/electronics10172144.

D. Perry, M. Nakamoto, N. Verghese, P. Hurat, and R. Rouse, "Model-based approach for design verification and co-optimization of catastrophic and parametric-related defects due to systematic manufacturing variations," Design for Manufacturability through Design-Process Integration, 2007. doi: 10.1117/12.712471.

K. Arabi and B. Kaminska, "Oscillation-test methodology for low-cost testing of active analog filters," IEEE Trans Instrum Meas, vol. 48, no. 4, pp. 798–806, 1999, doi: 10.1109/19.779176.

M. Milić, M. A. Stošović, and V. Litovski, "Oscillation based analog testing A case study," Proceedings of the 34th International Convention on Information and Communication Technology, Electronics and Microelectronics – MIPRO, vol. 1, pp. 118-123, May, 2011, ISBN 1847-3938.

P. Petrashin, L. Toledo, W. Lancioni, P. Osuch, and T. Stander, "Oscillation-Based Test Applied to a Wideband CCII," VLSI Design, vol. 2017, 2017, doi: 10.1155/2017/5075103.

M. Ballot and T. Stander, "A RF amplifier with oscillation-based BIST based on differential power detection," Proceedings - IEEE International Symposium on Circuits and Systems, 2021. doi: 10.1109/ISCAS51556.2021.9401388

H. P. Nel, T. Stander, and F. C. Dualibe, "Built-In Oscillation-Based Self-Testing of a 2.4 GHz LNA in 0.35μ m CMOS," 2018 25th IEEE International Conference on Electronics Circuits and Systems, ICECS 2018, 2018. doi: 10.1109/ICECS.2018.8618052.

M. A. Stošović, M. Milić, and V. Litovski, "Analog filter diagnosis using the oscillation based method," Journal of Electrical Engineering, vol. 63, no. 6, 2012, doi: 10.2478/v10187-012-0052-4.

M. Petrovic and M. Milic, "Analog Device Design for Testability in the Case of Oscillation Based Testing," Proceedings of the International Conference on Microelectronics, ICM, 2017. doi: 10.1109/MIEL.2017.8190122.

M. Milic and V. Litovski, "Oscillation-based testing method for detecting switch faults in High-Q SC biquad filters," Facta Universitatis, Series: Electronics and Energetics, vol. 28, no. 2, 2015, doi: 10.2298/fuee1502223m.

D. Mitić, G. Jovanović, M. Stojčev, and D. Antić, "ON DESIGN OF SELF-TUNING ACTIVE FILTERS," Facta Universitatis, Series: Automatic Control and Robotics, vol. 19, no. 1, 2020, doi: 10.22190/fuacr2001059m.

D. Živaljević and S. V. Nikolić, "NEW TYPE OF NEARLY MONOTONIC PASSBAND FILTERS WITH SHARP CUTOFF," Facta Universitatis, Series: Automatic Control and Robotics, vol. 16, no. 1, 2017, doi: 10.22190/fuacr1701061z.

R. P. Sallen and E. L. Key, "A practical method of designing RC active filters," IRE Transactions on Circuit Theory, vol. 2, no. 1, 1995, doi: 10.1109/tct.1955.6500159.

V. Litovski, "Active RC Cascade Circuit Synthesis," in Lecture Notes in Electrical Engineering, vol. 596, 2019. doi: 10.1007/978-981-32-9852-1_15.

L. Von Wangenheim, "On the Barkhausen and Nyquist stability criteria," Analog Integrated Circuits and Signal Processing, vol. 66, no. 1, 2011, doi: 10.1007/s10470-010-9506-4.

A. G. S. Ventre, "Determinants and Systems of Linear Equations," in Calculus and Linear Algebra, (2023). doi: 10.1007/978-3-031-20549-1.

M. P. Garde, A. Lopez-Martin, R. G. Carvajal, and J. Ramírez-Angulo, "Super Class-AB Recycling Folded Cascode OTA," IEEE J Solid-State Circuits, vol. 53, no. 9, 2018, doi: 10.1109/JSSC.2018.2844371.

D. D. Mirkovic, M. J. Stanojlovic Mirkovic, M. L. J. Milic, and V. Z. Petrovic, "A Defects Classification Algorithm for the Hybrid OBT–IDDQ Fault Diagnosis Technique in Analog CMOS Integrated Circuits," Journal of Circuits, Systems and Computers, vol. 0, no. 0, p. 2450146, doi: 10.1142/S0218126624501469.




DOI: https://doi.org/10.22190/FUACR240501001M

Refbacks

  • There are currently no refbacks.


Print ISSN: 1820-6417
Online ISSN: 1820-6425