MAXIMIZATION OF WEAR RATES THROUGH EFFECTIVE CONFIGURATION OF STANDOFF DISTANCE AND HYDRAULIC PARAMETERS IN ULTRASONIC PULSATING WATERJET

Akash Nag, Amit Rai Dixit, Jana Petrů, Petra Váňová, Kateřina Konečná, Sergej Hloch

DOI Number
https://doi.org/10.22190/FUME220523045N
First page
165
Last page
186

Abstract


A pulsating waterjet is a technological modification of a conventional waterjet that utilizes ultrasonic vibrations to generate a modulated jet, resulting in repetitive fatigue loading of the material. The erosion efficiency of the ultrasonic pulsating waterjet is majorly determined by the hydraulic factors and its interaction with standoff distance. However, the dependency of the wear rates on different hydraulic factors and formulation of an implicit prediction model for determining effective standoff distance is still not present to date. Therefore, in this study, the combined dependency of the supply pressure (20-40 MPa), nozzle diameter (0.3-1.0 mm), and standoff distance (1-121 mm) on wear rates of AW-6060 aluminum alloy are studied. Statistical analysis is used to determine the statistically significant factors and formulate regression equations to determine output responses within the experimental domain. The surface topography and sub-surface microhardness of the eroded grooves were studied. The results show that both the disintegration depth and the material removal increase with an increase in the nozzle diameter and supply pressure. However, the dependency of the output responses on nozzle diameter is statistically more evident than supply pressure and two-way interactions. Cross-sectional images of the grooves showed typical hydrodynamic erosion characteristics in erosion cavities, subsurface voids, and material upheaving. The results of microhardness analysis showed an approximately 15-20% increase in hardness values compared to the untreated samples.

Keywords

Pulsating waterjet, Disintegration depth, Volume removal, ANOVA, Microhardness

Full Text:

PDF

References


Perec, A., Radomska-Zalas, A., Fajdek-Bieda, A., 2022, Experimental research into marble cutting by abrasive water jet, Facta Universitatis-Series Mechanical Engineering, 20(1), pp. 145–156.

Natarajan, Y., Murugesan, P.K., Mohan, M., Khan, S.A.L.A., 2020, Abrasive water jet machining process: A state of art of review, Journal of Manufacturing Processes, 49, pp. 271–322.

Kumar, R., Chattopadhyaya, S., Dixit, A.R., Bora, B., Zelenak, M., Foldyna, J., Hloch, S., Hlavacek, P., Scucka, J., Klich, J., Sitek, L., Vilaca, P., 2017, Surface integrity analysis of abrasive water jet-cut surfaces of friction stir welded joints, International Journal of Advanced Manufacturing Technology, 88(5–8), pp. 1687–1701.

Perec, A., 2018, Experimental research into alternative abrasive material for the abrasive water-jet cutting of titanium, The International Journal of Advanced Manufacturing Technology, 97(1), pp. 1529–1540.

Vijay, M.M., Foldyna, J., Remisz, J., 2018, Ultrasonic modulation of high-speed water jets, in: Geomechanics 93, Routledge, pp. 327–332.

Fujisawa, N., Takano, S., Fujisawa, K., Yamagata, T., 2018, Experiments on liquid droplet impingement erosion on a rough surface, Wear, 398–399, pp. 158–164.

Kang, Y., Xie, F., Shi, H., Wu, N., Wang, Z., Wang, X., Hu, Y., Li, D., 2021, Experimental investigation on the penetration characteristics of low-frequency impact of pulsed water jet, Wear, 448–449, 204145.

Foldyna, J., Sitek, L., Ščučka, J., Martinec, P., Valíček, J., Páleníková, K., 2009, Effects of pulsating water jet impact on aluminium surface, Journal of Materials Processing Technology, 209(20), pp. 6174–6180.

Peng, J., Wong, L.N.Y., Teh, C.I., 2017, Influence of grain size heterogeneity on strength and microcracking behavior of crystalline rocks, Journal of Geophysical Research: Solid Earth, 122(2), pp. 1054–1073.

Nag, A., Hloch, S., Dixit, A.R., Pude, F., 2020, Utilization of ultrasonically forced pulsating water jet decaying for bone cement removal, The International Journal of Advanced Manufacturing Technology, 110(3–4), pp. 829–840.

Nag, A., Hvizdos, P., Dixit, A.R., Petrů, J., Hloch, S., 2021, Influence of the frequency and flow rate of a pulsating water jet on the wear damage of tantalum, Wear, 477, 203893.

Říha, Z., Zeleňák, M., Kruml, T., Poloprudský, J., 2021, Comparison of the disintegration abilities of modulated and continuous water jets, Wear, 478, 203891.

Blaisot, J.B., Adeline, S., 2003, Instabilities on a free falling jet under an internal flow breakup mode regime, International Journal of Multiphase Flow, 29(4), pp. 629–653.

Dehkhoda, S., Hood, M., 2013, An experimental study of surface and sub-surface damage in pulsed water-jet breakage of rocks, International Journal of Rock Mechanics and Mining Sciences, 63, pp. 138–147.

Zeleňák, M., Říha, Z., Jandačka, P., 2020, Visualization and velocity analysis of a high-speed modulated water jet generated by a hydrodynamic nozzle, Measurement, 159, 107753.

Gensheng, L., Zhonghou, S., Changshan, Z., Debin, Z., Hongbing, C., 2005, Investigation and application of self-resonating cavitating water jet in petroleum engineering, Petroleum Science and Technology, 23(1), pp. 1–15.

Amegadzie, M.Y., Moreau, E.D., Christensen, B., Donaldson, I.W., Tieu, A., Vijay, M.M., Plucknett, K.P., 2021, Ultrasonic pulsed waterjet surface peening of an industrial aluminum-based metal matrix composite, Surface and Coatings Technology, 426, 127795.

Foldyna, J., 2011,Use of acoustic waves for pulsating water jet generation, in: Acoustic Waves: From Microdevices to Helioseismology, IntechOpen, 14, pp. 323–342.

Foldyna, J., Sitek, L., Habán, V., 2006, Acoustic wave propagation in high-pressure system, Ultrasonics, 44, pp. e1457–e1460.

Pochylý, F., Habán, V., Foldyna, J., Sitek, L., 2007, 3D problem of pressure wave propagation in the tube with inconstant cross section, in: Proceedings of the International Congress on Ultrasonics, Vienna, pp. 1–4.

Foldyna, J., Říha, Z., Sitek, L., Švehla, B., 2007, Numerical simulation of transmission of acoustic waves in high-pressure system, in: Proceedings of the International Congress on Ultrasonics, Vienna, pp. 1–4.

Hreha, P., Hloch, S., Magurovd, D., Valicek, J., Kozak, D., Harnicdrovd, M., Rakin, M., 2010, Water jet technology used in medicine, Tehnicki Vjesnik, 17(2), pp. 237–240.

Tripathi, R., Hloch, S., Chattopadhyaya, S., Klichová, D., Ščučka, J., Das, A.K., 2020, Application of the pulsating and continous water jet for granite erosion, International Journal of Rock Mechanics and Mining Sciences, 126, 104209.

Hloch, S., Srivastava, M., Nag, A., Muller, M., Hromasová, M., Svobodová, J., Kruml, T., Chlupová, A., 2020, Effect of pressure of pulsating water jet moving along stair trajectory on erosion depth, surface morphology and microhardness, Wear, 452-453, 203278.

Srivastava, M., Hloch, S., Gubeljak, N., Milkovic, M., Chattopadhyaya, S., Klich, J., 2019, Surface integrity and residual stress analysis of pulsed water jet peened stainless steel surfaces, Measurement, 143, pp. 81–92.

Srivastava, M., Hloch, S., Tripathi, R., Kozak, D., Chattopadhyaya, S., Dixit, A.R., Foldyna, J., Hvizdos, P., Fides, M., Adamcik, P., 2018, Ultrasonically generated pulsed water jet peening of austenitic stainless-steel surfaces, Journal of Manufacturing Processes, 32, pp. 455–468.

Nag, A., Hloch, S., Dixit, A.R., 2021, On-Line Monitoring of In-Vitro Application of PWJ for Bone Cement Disintegration, in: Advances in Manufacturing Engineering and Materials II, Lecture Notes in Mechanical Engineering, Springer, pp. 100–110.

Hloch, S., Nag, A., Pude, F., Foldyna, J., Zeleňák, M., 2019, On-line measurement and monitoring of pulsating saline and water jet disintegration of bone cement with frequency 20 kHz, Measurement, 147, 106828.

Hloch, S., Adamčík, P., Nag, A., Srivastava, M., Čuha, D., Müller, M., Hromasová, M., Klich, J., 2019, Hydrodynamic ductile erosion of aluminium by a pulsed water jet moving in an inclined trajectory, Wear, 428-429, pp. 178–192.

Nag, A., Stolárik, G., Svehla, B., Hloch, S., 2021, Effect of Water Flow Rate on Operating Frequency and Power During Acoustic Chamber Tuning, in: Advances in Manufacturing Engineering and Materials II, Lecture Notes in Mechanical Engineering, Springer, pp. 142–154.

Poloprudský, J., Nag, A., Kruml, T., Hloch, S., 2021, Effects of liquid droplet volume and impact frequency on the integrity of Al alloy AW2014 exposed to subsonic speeds of pulsating water jets, Wear, 488-489, 204136.

Perec, A., 2022, Desirability Function Analysis (DFA) in Multiple Responses Optimization of Abrasive Water Jet Cutting Process, Reports in Mechanical Engineering, 1(3), pp. 10-19.

Perec, A., Radomska-Zalas, A., Fajdek-Bieda, A., Pude, F., 2022, Process optimization by applying the response surface methodology (RSM) to the abrasive suspension water jet cutting of phenolic composites, Facta Universitatis-Series Mechanical Engineering, 21(4), pp. 575-589.

Hloch, S., Souček, K., Svobodová, J., Hromasová, M., Müller, M., 2022, Subsurface microtunneling in ductile material caused by multiple droplet impingement at subsonic speeds, Wear, 490–491, 204176.

Poloprudský, J., Chlupová, A., Šulák, I., Kruml, T., Hloch, S., 2021, Surface and Subsurface Analysis of Stainless Steel and Titanium Alloys Exposed to Ultrasonic Pulsating Water Jet, Materials, 14(18), 5212.




DOI: https://doi.org/10.22190/FUME220523045N

Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4