AGRO-WASTE NATURAL FIBER SAMPLE PREPARATION TECHNIQUES FOR BIO-COMPOSITES DEVELOPMENT: METHODOLOGICAL INSIGHTS

Resego Phiri, Sanjay Mavinkere Rangappa, Suchart Siengchin, Dragan Marinkovic

DOI Number
https://doi.org/10.22190/FUME230905046P
First page
631
Last page
656

Abstract


In today's engineering industries, there is a growing focus on sustainable and eco-friendly products due to their recyclability, abundant availability and property variability. One key aspect of this sustainability effort is the development of eco-friendly materials, particularly bio composites derived from agricultural waste residues. The physical, mechanical and thermal properties as well as suitability of these fibers depend greatly on the methods used for extraction, processing, chemical modification and physical treatments. Understanding these processes comprehensively is essential for obtaining desired natural fibers/fillers from agricultural waste for creating effective bio composites to meet specific application demands. This study aims to provide a comprehensive assessment of the various extraction and modification techniques employed for natural fibers. It offers an in-depth review of diverse extraction processes, ranging from the initial harvesting to the decortication stage. It has been revealed that the choice of extraction methodologies depends on climate, water resources, local traditions, and the desired fiber quality. Additionally, the paper explores chemical and physical treatments, highlighting how each method influences the structure and properties of natural fibers. Overall, this review offers practical insights into the steps taken to transform agro-waste biomass into desired natural fiber and in turn biocomposite material, while enhancing product quality and performance.


Keywords

Natural fibers, Extraction processes, Chemical treatments, Physical/surface modifications, Bio-composite development

Full Text:

PDF

References


Singh, M.K., Tewari, R., Zafar, S., Rangappa, S.M., Siengchin, S., 2023, A comprehensive review of various factors for application feasibility of natural fiber-reinforced polymer composites, Results in Materials, 17, 100355.

Sanjay, M.R., Siengchin, S., Parameswaranpillai, J., Jawaid, M., Pruncu, C.I., Khan, A., 2019, A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization, Carbohydr Polym, 207, pp. 108–121.

Ogah, A.O., Ezeani, O.E., Nwobi, S.C., Ikelle, I.I., 2022, Physical and Mechanical Properties of Agro-Waste Filled Recycled High Density Polyethylene Biocomposites, South Asian Res J Eng Tech, 4, 55–62.

Kılınç, A.Ç., Durmuşkahya, C., Seydibeyoğlu, M.Ö., 2017, Natural fibers, Fiber technology for fiber-reinforced composites, pp. 209–235.

Gebai, S.S., Hallal, A.M., Hammoud, M.S., 2018, Mechanical properties of natural fiber reinforced polymers: emerging research and opportunities, emerging research and opportunities, IGI Global.

Kalia, S., Kaith, B.S., Kaur, I., 2009, Pretreatments of natural fibers and their application as reinforcing material in polymer composites—a review, Polym Eng Sci, 49, pp. 1253–1272.

Jiménez, L., Rodríguez, A., 2010, Valorization of agricultural residues by fractionation of their components, Open Agric J. 4, pp.125-134.

Santolini, E., Bovo, M., Barbaresi, A., Torreggiani, D., Tassinari, P., 2021, Turning agricultural wastes into biomaterials: Assessing the sustainability of scenarios of circular valorization of corn cob in a life-cycle perspective, Applied Sciences, 11, 6281.

Naeem, M.A., Siddiqui, Q., Khan, M.R., Mushtaq, M., Wasim, M., Farooq, A., Naveed, T., Wei, Q., 2022, Bacterial cellulose-natural fiber composites produced by fibers extracted from banana peel waste, Journal of Industrial Textiles, 51, pp. 990S-1006S.

Morales, M.A., Atencio Martinez, C.L., Maranon, A., Hernandez, C., Michaud, V., Porras, A., 2021, Development and characterization of rice husk and recycled polypropylene composite filaments for 3D printing, Polymers (Basel), 13, 1067.

Dungani, R., Karina, M., Sulaeman, A., Hermawan, D., Hadiyane, A., 2016, Agricultural waste fibers towards sustainability and advanced utilization: a review, Asian J Plant Sci, 15, pp. 42–55.

Jayaprakash, K., Osama, A., Rajagopal, R., Goyette, B., Karthikeyan, O.P., 2022, Agriculture waste biomass repurposed into natural fibers: a circular bioeconomy perspective, Bioengineering, 9, 296.

FAO, 2017, The future of food and agriculture and challenges, Food and agriculture organization of the United Nations, Rome.

Lokantara, I.P., Suardana, N.P.G., Surata, I.W., Winaya, I.N.S., 2020, A review on natural fibers: extraction process and properties of grass fibers, International Journal of Mechanical Engineering and Technology (IJMET), 1, pp. 84–91.

Dayan, M.D.A.R., Rahman, M.D.M., Ferdush, J., Kaysar, M.A., Uddin, M.D.M., 2022, Effect of Harvesting Time on the Fiber Yield and Characterization of Jute Fiber, Journal of Natural Fibers, 19, pp. 12434–12445.

Dudarev, I., 2022, A review of fibre flax harvesting: conditions, technologies, processes and machines, Journal of Natural Fibers, 19, pp. 4496–4508.

Pari, L., Baraniecki, P., Kaniewski, R., Scarfone, A., 2015, Harvesting strategies of bast fiber crops in Europe and in China, Ind Crops Prod, 68, pp. 90–96.

Stevens, C.V., 2010, Industrial applications of natural fibres: structure, properties and technical applications, John Wiley & Sons.

Lee, C.H., Khalina, A., Lee, S., Liu, M., 2020, A comprehensive review on bast fibre retting process for optimal performance in fibre-reinforced polymer composites, Advances in Materials Science and Engineering, 2020, pp. 1–27.

Mohankumar, D., Amarnath, V., Bhuvaneswari, V., Saran, S.P., Saravanaraj, K., Gogul, M.S., Sridhar, S., Kathiresan, G., Rajeshkumar, L., 2021, Extraction of plant based natural fibers–A mini review, IOP conference series: materials science and engineering, 012023.

Konczewicz, W., Zimniewska, M., Valera, M.A., 2018, The selection of a retting method for the extraction of bast fibers as response to challenges in composite reinforcement, Textile Research Journal, 88, pp. 2104–2119.

Ahmed, Z., Rahman, T., Timmi, U.H., Mehrin, S., 2023, Types, stages and mechanism of action of Jute retting: An overview, International Journal of Scholarly Research and Reviews, 2, 10.56781/ijsrr.2023.2.2.0026, pp. 009-020

Stawski, D., Çalişkan, E., Yilmaz, N.D., Krucińska, I., 2020, Thermal and mechanical characteristics of okra (abelmoschus esculentus) fibers obtained via water-and dew-retting, Applied Sciences, 10, 5113.

Yu, X., Xia, Y., Liang, D., Fu, W., Yin, C., 2022, Effect of Warm-Water Retting Pretreatment on the Physical Properties of Banana Stem and Its Fibre, Materials, 15, 8462.

Narkpiban, K., Poonsawat, T., 2022, Optimizing Cellulose Extraction from Kenaf (Hibiscus Cannabinus L.) Fiber by Selective Retting and Hydrothermal Pretreatment, Journal of Natural Fibers, 19, pp. 700–713.

De Prez, J., Van Vuure, A.W., Ivens, J., Aerts, G., Van de Voorde, I., 2019, Effect of enzymatic treatment of flax on chemical composition and the extent of fiber separation, Bioresources, 14, pp. 3012–3030.

Rozyanty, A.R., Zhafer, S.F., Shayfull, Z., Nainggolan, I., Musa, L., Zheing, L.T., 2021, Effect of water and mechanical retting process on mechanical and physical properties of kenaf bast fiber reinforced unsaturated polyester composites, Compos Struct, 257, 113384.

Ruan, P., Raghavan, V., Du, J., Gariepy, Y., Lyew, D., Yang, H., 2020, Effect of radio frequency pretreatment on enzymatic retting of flax stems and resulting fibers properties, Ind Crops Prod, 146, 112204.

Réquilé, S., Mazian, B., Grégoire, M., Musio, S., Gautreau, M., Nuez, L., Day, A., Thiébeau, P., Philippe, F., Chabbert, B., 2021, Exploring the dew retting feasibility of hemp in very contrasting European environments: Influence on the tensile mechanical properties of fibres and composites, Ind Crops Prod, 164, 113337.

Hulle, A., Kadole, P, Katkar, P., 2015, Agave Americana Leaf Fibers, Fibers, 3, pp. 64–75.

Sadrmanesh, V., Chen, Y., Rahman, M., AL-Oqla, F.M., 2019, Developing a decision making model to identify the most influential parameters affecting mechanical extraction of bast fibers, J Clean Prod, 238, 117891.

Van de Weyenberg, I., Ivens, J., De Coster, A., Kino, B., Baetens, E., Verpoest, I., 2003, Influence of processing and chemical treatment of flax fibres on their composites, Compos Sci Technol, 63, pp. 1241–1246.

Widyasanti, A., Napitupulu, L.O.B., Thoriq, A., 2020, Physical and mechanical properties of natural fiber from Sansevieria trifasciata and Agave sisalana, IOP Conference Series: Earth and Environmental Science, 012032.

Miao, M., Pierlot, A.P., Millington, K., Gordon, S.G., Best, A., Clarke, M., 2013, Biodegradable mulch fabric by surface fibrillation and entanglement of plant fibers, Textile Research Journal, 83, pp. 1906–1917.

Bachchan, A.A., Das, P.P., Chaudhary, V., 2022, Effect of moisture absorption on the properties of natural fiber reinforced polymer composites: A review, Mater Today Proc, 49, pp. 3403–3408.

Sisti, L., Totaro, G., Vannini, M., Celli, A., 2018, Retting Process as a Pretreatment of Natural Fibers for the Development of Polymer Composites, Lignocellulosic Composite Materials, pp. 97–135.

Mohammed, M., Jawad, A.J.M., Mohammed, A.M., Oleiwi, J.K., Adam, T., Osman, A.F., Dahham, O.S., Betar, B.O., Gopinath, S.C.B., Jaafar, M., 2023, Challenges and advancement in water absorption of natural fiber-reinforced polymer composites, Polym Test, 124, 108083.

Kumar, N.P., Chellapandian, M., Arunachelam, N., Vincent, P., 2022, Effect of mercerization on the chemical characteristics of plant-based natural fibers, Mater Today Proc, 68, pp. 1201–1207.

Samaei, S.E., Mahabadi, H.A., Mousavi, S.M., Khavanin, A., Faridan, M., Taban, E., 2022, The influence of alkaline treatment on acoustical, morphological, tensile and thermal properties of Kenaf natural fibers, Journal of Industrial Textiles, 51, pp. 8601S-8625S.

Setswalo, K., Molaletsa, N., Oladijo, P., Akinlabi, E., Sanjay, M.R., Siengchin, S., 2021, The Influence of Fiber Processing and Alkaline Treatment on the Properties of Natural Fiber-reinforced Composites: A Review, Applied Science and Engineering Progress, 4, pp. 632-650

Setyayunita, T., Widyorini, R., Marsoem, S.N., Irawati, D., 2022, Effect of Different Conditions of Sodium Chloride Treatment on the Characteristics of Kenaf Fiber-Epoxy Composite Board, Journal of the Korean Wood Science and Technology, 50, pp. 93–103.

Zin, M.H., Abdan, K., Mazlan, N., Zainudin, E.S., Liew, K.E., 2018, The effects of alkali treatment on the mechanical and chemical properties of pineapple leaf fibres (PALF) and adhesion to epoxy resin, IOP Conference Series: Materials Science and Engineering, 012035.

Boumaaza, M., Belaadi, A., Bourchak, M., 2021, The Effect of Alkaline Treatment on Mechanical Performance of Natural Fibers-reinforced Plaster: Optimization Using RSM, Journal of Natural Fibers, 18, pp. 2220–2240.

Cai, M., Takagi, H., Nakagaito, A.N., Li, Y., Waterhouse, G.I.N., 2016, Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites, Compos Part A Appl Sci Manuf, 90, pp. 589–597.

Mohana Krishnudu, D., Sreeramulu, D., Reddy, P.V., 2020, Alkali Treatment Effect: Mechanical, Thermal, Morphological, and Spectroscopy Studies on Abutilon Indicum Fiber-Reinforced Composites, Journal of Natural Fibers, 17, pp. 1775–1784.

Baskaran, P.G., Kathiresan, M., Pandiarajan, P., 2022, Effect of Alkali-treatment on Structural, Thermal, Tensile Properties of Dichrostachys Cinerea Bark Fiber and Its Composites, Journal of Natural Fibers, 19, pp. 433–449.

Jain, J., Sinha, S., Jain, S., 2021, Compendious Characterization of Chemically Treated Natural Fiber from Pineapple Leaves for Reinforcement in Polymer Composites, Journal of Natural Fibers, 18, pp. 845–856.

Ariawan, D., Rivai, T.S., Surojo, E., Hidayatulloh, S., Akbar, H.I., Prabowo, A.R., 2020, Effect of alkali treatment of Salacca Zalacca fiber (SZF) on mechanical properties of HDPE composite reinforced with SZF, Alexandria Engineering Journal, 59, pp. 3981–3989.

Boran Torun, S., Pesman, E., Donmez Cavdar, A., 2019, Effect of alkali treatment on composites made from recycled polyethylene and chestnut cupula, Polym Compos, 40, pp. 4442–4451.

Nagappan, S., Subramani, S.P., Palaniappan, S.K., Mylsamy, B., 2022, Impact of alkali treatment and fiber length on mechanical properties of new agro waste Lagenaria Siceraria fiber reinforced epoxy composites, Journal of Natural Fibers, 19, pp. 6853–6864.

Sepe, R., Bollino, F., Boccarusso, L., Caputo, F., 2018, Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites, Compos B Eng, 133, pp. 210–217.

Kenned, J.J., Sankaranarayanasamy, K., Kumar, C.S., 2021, Chemical, biological, and nanoclay treatments for natural plant fiber-reinforced polymer composites: A review, Polymers and Polymer Composites, 29, pp. 1011–1038.

Youbi, S.B.T., Tagne, N.R.S., Harzallah, O., Huisken, P.W.M., Stanislas, T.T., Njeugna, E., Drean, J.Y., Bistac-Brogly, S., 2022, Effect of alkali and silane treatments on the surface energy and mechanical performances of Raphia vinifera fibres, Ind Crops Prod, 190, 115854.

Alshahrani, H., Prakash, V.R.A., 2022, Effect of silane-grafted orange peel biochar and areca fibre on mechanical, thermal conductivity and dielectric properties of epoxy resin composites, Biomass Convers Biorefin, pp. 1-9.

Sabarinathan, P., Rajkumar, K., Annamalai, V.E., Vishal, K., 2020, Characterization on chemical and mechanical properties of silane treated fish tail palm fibres, Int J Biol Macromol, 163, pp. 2457–2464.

Wang, Q., Zhang, Y., Liang, W., Wang, J., Chen, Y., 2020, Effect of silane treatment on mechanical properties and thermal behavior of bamboo fibers reinforced polypropylene composites, J Eng Fiber Fabr, 15, 1558925020958195.

Subroto, E., Cahyana, Y., Indiarto, R., Rahmah, T.A., 2023, Modification of Starches and Flours by Acetylation and Its Dual Modifications: A Review of Impact on Physicochemical Properties and Their Applications, Polymers (Basel), 15, 2990.

Oladele, I.O., Michael, O.S., Adediran, A.A., Balogun, O.P., Ajagbe, F.O., 2020, Acetylation treatment for the batch processing of natural fibers: Effects on constituents, tensile properties and surface morphology of selected plant stem fibers, Fibers, 8, 73.

Beztout, M., Boukerrou, A., Djidjelli, H., Barres, C., Fenouillot, F., 2015, Effects of acetylation process and cellulose content on the mechanical, thermal, morphological and rheological properties of poly (vinyl chloride)/cellulose composites, Cellul. Chem Technol, 49, pp. 517–528.

El Boustani, M., Brouillette, F., Lebrun, G., Belfkira, A., 2015, Solvent‐free acetylation of lignocellulosic fibers at room temperature: Effect on fiber structure and surface properties, J Appl Polym Sci, 132, 42247.

Souza Da Rosa, T., Trianoski, R., Michaud, F., Belloncle, C., Iwakiri, S., 2022, Efficiency of Different Acetylation Methods Applied to Cellulose Fibers Waste from Pulp and Paper Mill Sludge, Journal of Natural Fibers, 19, pp. 185–198.

Vinod, A., Sanjay, M.R., Suchart, S., Jyotishkumar, P., 2020, Renewable and sustainable biobased materials: An assessment on biofibers, biofilms, biopolymers and biocomposites, J Clean Prod, 258, 120978.

Seisa, K., Chinnasamy, V., Ude, A.U., 2022, Surface Treatments of Natural Fibres in Fibre Reinforced Composites: A Review, Fibres & Textiles in Eastern Europe, 30, pp. 82–89.

Dursun, S., Yıldız, S.Z., 2023, Eco-Friendly Bleaching of Cotton Fabrics Without Heating Using Direct Process Water in the Presence of Sodium Chlorite and Phosphonate, Journal of Natural Fibers, 20, 2146248.

Pereira, P.H.F., Santos, L.B.U., Monticeli, F., Cioffi, M.O.H., 2023, Influence of acetosolv and eco-friendly bleaching treatment of orange bagasse in biocomposite properties: a mechanical and thermal approach, Cellulose, 30, pp. 3083–3097.

Zhang, J., Zheng, H., Zheng, L., 2017, A novel eco-friendly scouring and bleaching technique of flax rove using supercritical carbon dioxide fluid, J Eng Fiber Fabr, 12, 155892501701200420.

Sojka-Ledakowicz, J., Walawska, A., Filipowska, B., Lewartowska, J., Olczyk, J., Kiwała, M., 2015, New eco-friendly method of cellulosic product bleaching with simultaneous disinfection, Fibres & Textiles in Eastern Europe, 23, 3(111), pp. 115-119.

Singh, A., Varghese, L.M., Battan, B., Patra, A.K., Mandhan, R.P., Mahajan, R., 2020, Eco-friendly scouring of ramie fibers using crude xylano-pectinolytic enzymes for textile purpose, Environmental Science and Pollution Research. 27, pp. 6701–6710.

Hassan, M.M., Saifullah, K., 2019, Effect of Enzymatic Bio-scouring on the Dyeability, Physicochemical, and Mechanical Properties of Jute Fabrics, Fibers and Polymers, 20, pp. 578–587.

Wei, L., McDonald, A.G., 2020, A review on grafting of biofibers for biocomposites, Materials, 9, 303.

Tataru, G., Guibert, K., Labbé, M., Léger, R., Rouif, S., Coqueret, X., 2020, Modification of flax fiber fabrics by radiation grafting: Application to epoxy thermosets and potentialities for silicone-natural fibers composites, Radiation Physics and Chemistry, 170, 108663.

Bao, X., Dong, F., Yu, Y., Wang, Q., Wang, P., Fan, X., Yuan, J., 2020, Green modification of cellulose-based natural materials by HRP-initiated controlled “graft from” polymerization, Int J Biol Macromol, 164, pp. 1237–1245.

Bhattacharya, A., Misra, B.N., 2004, Grafting: a versatile means to modify polymers: Techniques, factors and applications, Prog Polym Sci, 29, pp. 767–814.

Gupta, U.S., Dhamarikar, M., Dharkar, A., Chaturvedi, S., Kumrawat, A., Giri, N., Tiwari, S., Namdeo, R., 2021, Plasma modification of natural fiber: A review, Mater Today Proc, 43, pp. 451–457.

Sun, D., 2016, Surface modification of natural fibers using plasma treatment, Chapter 2 in Kalia, S. (Ed.), Biodegradable green composites, pp. 18–39, doi: 10.1002/9781118911068.ch2

Sawangrat, C., Thipchai, P., Kaewapai, K., Jantanasakulwong, K., Suhr, J., Wattanachai, P., Rachtanapun, P., 2023, Surface Modification and Mechanical Properties Improvement of Bamboo Fibers Using Dielectric Barrier Discharge Plasma Treatment, Polymers (Basel), 15, 1711.

Ramachandran, A., Mavinkere Rangappa, S., Kushvaha, V., Khan, A., Seingchin, S., Dhakal, H.N., 2022, Modification of Fibers and Matrices in Natural Fiber Reinforced Polymer Composites: A Comprehensive Review, Macromol Rapid Commun, 43, 2100862.

Sathish, S., Prabhu, L., Gokulkumar, S., Karthi, N., Balaji, D., Vigneshkumar, N., 2021, Extraction, treatment and applications of natural fibers for bio-composites–a critical review, International Polymer Processing, 36, pp. 114–130.

Otàlora Gonzàlez, C.M., Flores, S.K., Basanta, M.F., Gerschenson, L.N., 2020, Effect of beetroot (Beta vulgaris L. var conditiva) fiber filler and corona treatment on cassava starch films properties, Food Package Shelf Life, 26, 100605.

Kahl, C., Gemmeke, N., Bagnucki, J., Heim, H.P., 2022, Investigations on fiber–matrix properties of heat-treated and UV-treated regenerated cellulose fibers, Compos Part A Appl Sci Manuf, 152, 106669.

Mahzan, S., Fitri, M., Zaleha, M., 2017, UV radiation effect towards mechanical properties of Natural Fibre Reinforced Composite material: A Review, IOP conference series: materials science and engineering, 012021.

Yuan, J.M., Feng, Y.R., He, L.P., 2016, Effect of thermal treatment on properties of ramie fibers, Polym Degrad Stab, 133, pp. 303–311.

Jirawattanasomkul, T., Likitlersuang, S., Wuttiwannasak, N., Ueda, T., Zhang, D., Voravutvityaruk, T., 2020, Effects of heat treatment on mechanical properties of Jute fiber–reinforced polymer composites for concrete confinement, Journal of Materials in Civil Engineering, 32, 04020363.

Anggraeni, N.D., Latief, A.E., 2023, Natural fiber heat treatment on composite material, AIP Conference Proceedings, 2772(1), 030006.

Barbosa, A.P., Costa, L.L., Portela, T.G.R., Moura, E.A., Del Mastro, N.L., Satyanarayana, K.G., Monteiro, S.N., 2012, Effect of electron beam irradiation on the mechanical properties of buriti fiber, Matéria (Rio de Janeiro), 17, pp. 1135–1143.

Le Moigne, N., Sonnier, R., El Hage, R., Rouif, S., 2017, Radiation-induced modifications in natural fibres and their biocomposites: Opportunities for controlled physico-chemical modification pathways?, Ind Crops Prod, 109, pp. 199–213.

Ferreira, D.P., Cruz, J., Fangueiro, R., 2019, Chapter 1 - Surface modification of natural fibers in polymer composites, In: Koronis, G. and Silva, A. (eds.) Green Composites for Automotive Applications, pp. 3–41, Woodhead Publishing.

Vander Wielen, L.C., Ragauskas, A.J., 2006, Dielectric-barrier discharge initiated grafting to enhance fiber charge, Chem Eng Commun. 193, pp. 683–688.




DOI: https://doi.org/10.22190/FUME230905046P

Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4