SUSTAINABLE COMPOSITE MATERIALS FOR ELECTRIC VEHICLE APPLICATIONS: A COMPREHENSIVE REVIEW
Abstract
Keywords
Full Text:
PDFReferences
Egede, P., 2017, Concept for the Environmental Assessment of Lightweight Electric Vehicles, Environmental Assessment of Lightweight Electric Vehicles, Springer, Switzerland, pp. 59–91.
Singh, M.K., Siengchin, S., Rangappa, S.M., 2023, Recent Advances of Sustainable Composites in Manufacturing Sector, Journal of Applied Science, Engineering, Technology and Management, 1(2), pp. 1–2.
Singh, M.K., Tewari, R., Zafar, S., Rangappa, S.M., Siengchin, S., 2023, A comprehensive review of various factors for application feasibility of natural fiber-reinforced polymer composites, Results in Materials, 17, 100355.
Blanco, I., Ingrao, C., Siracusa, V., 2020, Life-cycle assessment in the polymeric sector: A comprehensive review of application experiences on the Italian scale, Polymers, 12(6), 1212.
Więckowski, J., Sałabun, W., 2025, Comparative sensitivity analysis in composite material selection: evaluating OAT and COMSAM methods in multi-criteria decision-making, Spectrum of Mechanical Engineering and Operational Research, 2(1), pp. 1-12.
Yang, Y., Boom, R., Irion, B., Van Heerden, D.J., Kuiper, P., De Wit, H., 2012, Recycling of composite materials, Chemical Engineering and Processing: Process Intensification, 51, pp. 53–68.
Loud, S.N., 1998, Commercial and Industrial Applications of Composites, Handbook of Composites, Springer, United States, pp. 931–956.
Phiri, R., Rangappa, S.M., Siengchin, S., Marinkovic, D., 2023, Agro-waste natural fiber sample preparation techniques for bio-composites development: methodological insights, Facta Universitatis-Series Mechanical Engineering, 21(4), pp. 631-656.
Ramesh, P., Vigneshvaran, R., Kumar, M.H., Rangappa, S.M., Siengchin, S., 2023, Environmental impact assessment of hybrid natural bio composite for pipeline repair application using life cycle assessment approach, in: Kushava, V., Rangappa, S.M., et al. (Eds.), Polymer Composite Systems in Pipeline Repair, Elsevier, United Kingdom, pp. 209–224.
Cimprich, A., Sadayappan, K., Young, S.B., 2023, Lightweighting electric vehicles: Scoping review of life cycle assessments, Journal of Cleaner Production, 433, 139692.
Dhingra, R., Das, S., 2014, Life cycle energy and environmental evaluation of downsized vs. lightweight material automotive engines, Journal of Cleaner Production, 85, pp. 347–358.
Bajwa, D.S., and Bhattacharjee, S., 2016, Current Progress, Trends and Challenges in the Application of Biofiber Composites by Automotive Industry, Journal of Natural Fibers, 13(6), pp. 660–669.
Xia, X., Li, P., 2022, A review of the life cycle assessment of electric vehicles: Considering the influence of batteries, Science of the Total Environment, 814, 152870.
Singh, M.K., Mohanty, A.K., Misra, M., 2023, Upcycling of waste polyolefins in natural fiber and sustainable filler-based biocomposites: A study on recent developments and future perspective, Composites Part B: Engineering, 263, 110852.
Mohanty, A.K., Vivekanandhan, S., Tripathi, N., Roy, P., Snowdon, M.R., Drzal, L.T., Misra, M., 2023, Sustainable composites for lightweight and flame retardant parts for electric vehicles to boost climate benefits: A perspective, Composites Part C: Open Access, 12, 100380.
Solihat, N.N., Hidayat, A.F., Taib, M.N.A.M., Hussin, M.H., Lee, S.H., Ghani, M.A.A., Edrus, S.S.A.O., Vahabi, H., Fatriasari, W., 2022, Recent Developments in Flame-Retardant Lignin-Based Biocomposite: Manufacturing, and characterization, Journal of Polymers and the Environment, 30(11), pp. 4517–4537.
Gupta, P., Toksha, B., Patel, B., Rushiya, Y., Das, P., Rahaman, M., 2022, Recent developments and research avenues for polymers in electric vehicles, The Chemical Record, 22(11), e202200186.
O’Brien-Bernini, F., 2011, Composites and sustainability — when green becomes golden, Reinforced Plastics, 55(6), pp. 27–29.
Shi, X.H., Li, X.L., Li, Y.M., Li, Z., Wang, D.Y., 2022, Flame-retardant strategy and mechanism of fiber reinforced polymeric composite: A review, Composites Part B: Engineering, 233, 109663.
Akampumuza, O., Wambua, P.M., Ahmed, A., Li, W., Qin, X.H., 2017, Review of the applications of biocomposites in the automotive industry, Polymer Composites, 38(11), pp. 2553–2569.
Rohit, K., Dixit, S., 2016, A review - future aspect of natural fiber reinforced composite, Polymers from Renewable Resources, 7(2), pp. 43–60.
Agarwal, J., Sahoo, S., Mohanty, S., Nayak, S.K., 2019, Progress of novel techniques for lightweight automobile applications through innovative eco-friendly composite materials: A review, Journal of Thermoplastic Composite Materials, 33(7), pp. 978–1013.
Husain, I., Ozpineci, B., Islam, M.S., Gurpinar, E., Su, G.J., Yu, W., Chowdhury, S., Xue, L., Rahman, D., Sahu, R., 2021, Electric Drive Technology Trends, Challenges, and Opportunities for Future Electric Vehicles, Proceedings of the IEEE, 109(6), pp. 1039–1059.
Dhoke, A., Dalavi, A., 2021, A critical review on lightweight design of battery pack enclosure for electric vehicles, International Journal of Sustainable Transport Technology, 4(2), pp. 53–62.
Shui, L., Chen, F., Garg, A., Peng, X., Bao, N., Zhang, J., 2018, Design optimization of battery pack enclosure for electric vehicle, Structural and Multidisciplinary Optimization, 58, pp. 331–347.
Rajak, D.K., Pagar, D.D., Kumar, R., Pruncu, C.I., 2019, Recent progress of reinforcement materials: A comprehensive overview of composite materials, Journal of Materials Research and Technology, 8(6), pp. 6354–6374.
Kulkarni, S.S., Hale, F., Taufique, M.F.N., Soulami, A., Devanathan, R., 2023, Investigation of Crashworthiness of Carbon Fiber-Based Electric Vehicle Battery Enclosure Using Finite Element Analysis, Applied Composite Materials, 30(6), pp. 1689–1715.
Nurhania, N., Syarifuddin, S., Armynah, B., Tahir, D., 2023, Fiber-reinforced polymer composite: Higher performance with renewable and eco-friendly plant-based fibers, Polymers from Renewable Resources, 14(3), pp. 215–233.
Choi, J.Y., Jeon, J.H., Lyu, J.H., Park, J., Kim, G.Y., Chey, S.Y., Quan, Y.J., Bhandari, B., Prusty, B.G., Ahn, S.H., 2022, Current Applications and Development of Composite Manufacturing Processes for Future Mobility, International Journal of Precision Engineering and Manufacturing-Green Technology, 10(1), pp. 269–291.
Ateeq, M., Shafique, M., Azam, A., Rafiq, M., 2023, A review of 3D printing of the recycled carbon fiber reinforced polymer composites: Processing, potential, and perspectives, Journal of Materials Research and Technology, 26, pp. 2291–2309.
Firmanda, A., Syamsu, K., Sari, Y.W., Cabral, J., Pletzer, D., Mahadik, B., Fisher, J., Fahma, F., 2022, 3D printed cellulose based product applications, Materials Chemistry Frontiers, 6(3), pp. 254–279.
Hufenbach, W., Böhm, R., Thieme, M., Winkler, A., Mäder, E., Rausch, J., Schade, M., 2011, Polypropylene/Glass Fibre 3D-Textile Reinforced Composites for Automotive Applications, Materials & Design, 32(3), pp. 1468–1476.
Radojičić, S., Konjatić, P., Katinić, M., Kačmarčik, J., 2023, The influence of material storage on mechanical properties and deterioration of composite materials, Tehnički Vjesnik, 30(5), pp. 1645-1651.
Yorseng, K., Sanjay, M.R., Tengsuthiwat, J., Pulikkalparambil, H., Parameswaranpillai, J., Siengchin, S., Moure, M.M., 2019, Information in United States patents on works related to ‘natural fibers’: 2000-2018, Current Materials Science: Formerly: Recent Patents on Materials Science, 12(1), pp. 4-76.
Naik, V., Kumar, M., Kaup, V., 2022, A Review on Natural Fiber Composite Materials in Automotive Applications, Engineered Science, 18, pp. 1–10.
Mohan Kumar, K., Naik, V., Kaup, V., Waddar, S., Santhosh, N., Harish, H. V., 2023, Nontraditional Natural Filler-Based Biocomposites for Sustainable Structures, Advances in Polymer Technology, 2023(1), 88338766.
Verrey, J., Wakeman, M.D., Michaud, V., Månson, J.A.E., 2006, Manufacturing Cost Comparison of Thermoplastic and Thermoset RTM for an Automotive Floor Pan, Composites Part A: Applied Science and Manufacturing, 37(1), pp. 9–22.
Stewart, R., 2010, Automotive Composites Offer Lighter Solutions, Reinforced Plastics, 54(2), pp. 22–28.
Fais, C., 2011, Lightweight Automotive Design with HP-RTM, Reinforced Plastics, 55(5), pp. 29–31.
Tewari, R., Singh, M.K., Zafar, S., 2021, Utilization of forest and plastic wastes for composite manufacturing using microwave-assisted compression molding for low load applications, Journal of Polymer Research, 28(11), 409.
Straub, F., Maier, O., Göhlich, D., Zou, Y., 2023, Forecasting the spatial and temporal charging demand of fully electrified urban private car transportation based on large-scale traffic simulation, Green Energy and Intelligent Transportation, 2(1), 100039.
Bhatt, P., Goe, A., 2017, Carbon Fibres: Production, Properties and Potential Use, Material Science Research India, 14(1), pp. 52–57.
Tamrakar, S., Kiziltas, A., Mielewski, D., Zander, R., 2021, Characterization of kenaf and glass fiber reinforced hybrid composites for underbody shield applications, Composites Part B: Engineering, 216, 108805.
Ning, H., Janowski, G.M., Vaidya, U.K., Husman, G., 2007, Thermoplastic Sandwich Structure Design and Manufacturing for the Body Panel of Mass Transit Vehicle, Composite Structures, 80(1), pp. 82–91.
Mierlo, J. Van, Berecibar, M., Baghdadi, M. El, De Cauwer, C., Messagie, M., Coosemans, T., Jacobs, V.A., Hegazy, O., 2021, Beyond the State of the Art of Electric Vehicles: A Fact-Based Paper of the Current and Prospective Electric Vehicle Technologies, World Electric Vehicle Journal, 12(1), 20.
Ajanovic, A., 2015, The future of electric vehicles: Prospects and impediments, Wiley Interdisciplinary Reviews: Energy and Environment, 4(6), pp. 521–536.
Mohanty, A.K., Vivekanandhan, S., Tripathi, N., Roy, P., Snowdon, M.R., Drzal, L.T., Misra, M., 2023, Sustainable composites for lightweight and flame retardant parts for electric vehicles to boost climate benefits: A perspective, Composites Part C: Open Access, 12, 100380.
Presting, H., and König, U., 2003, Future Nanotechnology Developments for Automotive Applications, Materials Science and Engineering: C, 23(6), pp. 737–741.
Narayana, K.J., Gupta Burela, R., 2018, A review of recent research on multifunctional composite materials and structures with their applications, Materials Today: Proceedings, 5(2), pp. 5580–5590.
Singh, M.K., Zafar, S., Rangappa, S.M., Siengchin, S., 2022, Mechanical Performance Study of Kenaf/HDPE Composite for Structural Applications under Wet or Outdoor Environments, Journal of Natural Fibers, 19(16), pp. 14115-14130.
Nehuis, F., Kleemann, S., Egede, P., Vietor, T., Herrmann, C., 2014, Future trends in the development of vehicle bodies regarding lightweight and cost, Lecture Notes in Mechanical Engineering, Springer, India, pp. 13–21.
Pervaiz, M., Panthapulakkal, S., KC, B., Sain, M., Tjong, J., 2016, Emerging Trends in Automotive Lightweighting through Novel Composite Materials, Materials Sciences and Applications, 7(1), pp. 26–38.
Un-Noor, F., Padmanaban, S., Mihet-Popa, L., Mollah, M.N., Hossain, E., 2017, A Comprehensive Study of Key Electric Vehicle (EV) Components, Technologies, Challenges, Impacts, and Future Direction of Development, Energies, 10(8), 1217.
Patil, A., Patel, A., Purohit, R., 2017, An overview of Polymeric Materials for Automotive Applications, Materials Today: Proceedings, 4(2), pp. 3807–3815.
Amasawa, E., Hasegawa, M., Yokokawa, N., Sugiyama, H., Hirao, M., 2020, Environmental performance of an electric vehicle composed of 47% polymers and polymer composites, Sustainable Materials and Technologies, 25, e00189.
Anwar, M., Sukmaji, I.C., Wijang, W.R., Diharjo, K., 2014, Application of Carbon Fiber-Based Composite for Electric Vehicle, Advanced Materials Research, 896, pp. 574–577.
Sajan, S., Philip Selvaraj, D., 2021, A review on polymer matrix composite materials and their applications, Materials Today: Proceedings, 47, pp. 5493–5498.
Fuchs, E.R.H., Field, F.R., Roth, R., Kirchain, R.E., 2008, Strategic materials selection in the automobile body: Economic opportunities for polymer composite design, Composites Science and Technology, 68(9), pp. 1989–2002.
Parandoush, P., Lin, D., 2017, A review on additive manufacturing of polymer-fiber composites, Composite Structures, 182, pp. 36–53.
https://www.grandviewresearch.com/industry-analysis/lightweight-materials-market (Last accesses 20.08.2024)
Wazeer, A., Das, A., Abeykoon, C., Sinha, A., Karmakar, A., 2023, Composites for electric vehicles and automotive sector: A review, Green Energy and Intelligent Transportation, 2(1), 100043.
Delogu, M., Zanchi, L., Dattilo, C.A., Pierini, M., 2017, Innovative composites and hybrid materials for electric vehicles lightweight design in a sustainability perspective, Materials Today Communications, 13, pp. 192–209.
Bhong, M., Khan, T.K., Devade, K., Krishna, B.V., Sura, S., Eftikhaar, H.K., Pal Thethi, H., Gupta, N., 2023, Review of composite materials and applications, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2023.10.026
Ali, A., Andriyana, A., 2020, Properties of multifunctional composite materials based on nanomaterials: A review, RSC Advances, 10(28), pp. 16390–16403.
Hsissou, R., Seghiri, R., Benzekri, Z., Hilali, M., Rafik, M., Elharfi, A., 2021, Polymer composite materials: A comprehensive review, Composite Structures, 262, 113640.
Malik, M., Dincer, I., Rosen, M.A., 2016, Review on use of phase change materials in battery thermal management for electric and hybrid electric vehicles, International Journal of Energy Research, 40(8), pp. 1011–1031.
Subramanian, M., Hoang, A.T., Kalidasan, B, Nižetić, S., Solomon, J.M., Balasubramanian, D., Subramaniyan, C., Thenmozhi, G., Metghalchi, H., Nguyen, X.P., 2021, A technical review on composite phase change material based secondary assisted battery thermal management system for electric vehicles, Journal of Cleaner Production, 322, 129079.
Alam, M.A., Sapuan, S.M., Ya, H.H., Hussain, P.B., Azeem, M., Ilyas, R.A., 2021, Application of biocomposites in automotive components: A review, Biocomposite and Synthetic Composites for Automotive Applications, Elsevier, United Kingdom, pp. 1–17.
Seraji, S.M., Song, P., Varley, R.J., Bourbigot, S., Voice, D., Wang, H., 2022, Fire-retardant unsaturated polyester thermosets: The state-of-art, challenges and opportunities, Chemical Engineering Journal, 430, 132785.
Kumar, S., Bharj, R.S., 2018, Emerging composite material use in current electric vehicle: A review, Materials Today: Proceedings, 5(14), pp. 27946–27954.
Beardmore, P., Johnson, C.F., 1986, The Potential for Composites in Structural Automotive Applications, Composites Science and Technology, 26(4), pp. 251–281.
Park, H.S., Dang, X.P., Roderburg, A., Nau, B., 2013, Development of Plastic Front Side Panels for Green Cars, CIRP Journal of Manufacturing Science and Technology, 6(1), pp. 44–52.
Subhani, T., Alghamdi, A. S., Khaliq, A., Munir, A., Javaid Iqbal, M., 2023, Investigating the Post-Sintering Thermal and Mechanical Treatments on the Properties of Alumina Reinforced Aluminum Nanocomposites, Tehnički vjesnik, 30(4), pp. 1003-1009.
Lyu, M.Y., and Choi, T.G., 2015, Research trends in polymer materials for use in lightweight vehicles, International Journal of Precision Engineering and Manufacturing, 16(1), pp. 213–220.
Al-Hussaini, A.S., 2014, Synthesis and Characterization of New Thermally Stable Polymers as New High-Performance Engineering Plastics, High Performance Polymers, 26(2), pp. 166–174.
Friedrich, K., Almajid, A.A., 2013, Manufacturing Aspects of Advanced Polymer Composites for Automotive Applications, Applied Composite Materials, 20(2), pp. 107–128.
Rajak, D.K., Pagar, D.D., Kumar, R., Pruncu, C.I., 2019, Recent progress of reinforcement materials: a comprehensive overview of composite materials, Journal of Materials Research and Technology, 8(6), pp. 6354–6374.
https://www.celanese.com/applications/electric-vehicles (Last accesses 20.08.2024)
Isaac, C. W., Ezekwem, C., 2021, A review of the crashworthiness performance of energy absorbing composite structure within the context of materials, manufacturing and maintenance for sustainability, Composite Structures, 257, 113081.
Ramachandaramurthy, V.K., Ajmal, A.M., Kasinathan, P., Tan, K.M., Yong, J.Y., Vinoth, R., 2023, Social Acceptance and Preference of EV Users - A Review, IEEE Access, 11, pp. 11956–11972.
Sadasivuni, K.K., Deshmukh, K., Almaadeed, M.A., 2020, 3D and 4D printing materials nanocomposites of polymer Processes, Applications, and Challenges, Elsevier, Netherlands, 573 p.
Baumann, M., Salzinger, M., Remppis, S., Schober, B., Held, M., Graf, R., 2019, Reducing the environmental impacts of electric vehicles and electricity supply: How hourly defined life cycle assessment and smart charging can contribute, World Electric Vehicle Journal, 10(1), 13.
Burchart-Korol, D., Jursova, S., Folęga, P., Korol, J., Pustejovska, P., Blaut, A., 2018, Environmental life cycle assessment of electric vehicles in Poland and the Czech Republic, Journal of Cleaner Production, 202, pp. 476–487.
Zhang, H., Xue, B., Li, S., Yu, Y., Li, X., Chang, Z., Wu, H., Hu, Y., Huang, K., Liu, L., Chen, L., 2023, Life cycle environmental impact assessment for battery-powered electric vehicles at the global and regional levels, Scientific Reports, 13(1), 7952.
Bicer, Y., Dincer, I., 2018, Life cycle environmental impact assessments and comparisons of alternative fuels for clean vehicles, Resources, Conservation and Recycling, 132, pp. 141–157.
Feng, T., Guo, W., Li, W., Meng, Z., Zhu, Y., Zhao, F., Liang, W., 2023, Unveiling Sustainable Potential: A Life Cycle Assessment of Plant–Fiber Composite Microcellular Foam Molded Automotive Components, Materials, 16(14), 4952.
Cha, M., Enshaei, H., Nguyen, H., Jayasinghe, S. G., 2023, Towards a future electric ferry using optimisation-based power management strategy in fuel cell and battery vehicle application—A review, Renewable and Sustainable Energy Reviews, 183, 113470.
Petrauskienė, K., Galinis, A., Kliaugaitė, D., Dvarionienė, J., 2021, Comparative environmental life cycle and cost assessment of electric, hybrid, and conventional vehicles in Lithuania, Sustainability, 13(2), 957.
https://www.iea.org/reports/global-ev-outlook-2022 (Last accesses 20.08.2024)
https://ev-volumes.com/ (Last accesses 20.08.2024)
Xu, G., Wang, S., Zhao, D., 2021, Transition to sustainable transport: understanding the antecedents of consumer’s intention to adopt electric vehicles from the emotional research perspective, Environmental Science and Pollution Research, 28(16), pp. 20362–20374.
Cha, M., Enshaei, H., Nguyen, H., Jayasinghe, S. G., 2023, Towards a future electric ferry using optimisation-based power management strategy in fuel cell and battery vehicle application—A review, Renewable and Sustainable Energy Reviews, 183, 113470.
Snehalika, Das, S., 2019, Emerging trends in Electric Vehicle in Indian market, 3rd International Conference on Recent Developments in Control, Automation & Power Engineering (RDCAPE), pp. 514–518.
Lashgari, A., 1994, Electric vehicle infrastructure market sustaining demand, Proceedings of 9th Annual Battery Conference on Applications and Advances, pp. 86–95.
Elakkia, E., Nandini, B., Perarasi, M., 2020, Trends and Performance Measures of Electric Vehicles in Market, TEST Engineering & Management, 82, pp. 8169–8174.
Murali, N., P, M.V., Ushakumari, S., 2022, Electric Vehicle Market Analysis and Trends, 19th India Council International Conference (INDICON), pp. 1–6.
https://www.aljazeera.com/news/2023/6/5/visualising-the-growth-of-the-electric-car-industry (Last accesses 20.08.2024)
https://www.fortunebusinessinsights.com/u-s-electric-vehicle-market-106396 (Last accesses 20.08.2024)
https://usceconreview.com/2022/11/14/the-economic-consequences-of-electric-vehicles/ (Last accesses 20.08.2024)
Deng, J., Bae, C., Denlinger, A., Miller, T., 2020, Electric Vehicles Batteries: Requirements and Challenges, Joule, 4(3), pp. 511–515.
Pantoja, W., Perez-Taborda, J. A., Avila, A., 2022, Tug-of-war in the selection of materials for battery technologies, Batteries, 8(9), 105.
Kotilainen, K., Makinen, S.J., Valta, J., 2017, Sustainable electric vehicle - prosumer framework and policy mix, IEEE Innovative Smart Grid Technologies - Asia (ISGT-Asia), pp. 1–6.
Agbesi, P.K., Ruffino, R., Hakovirta, M., 2023, The development of sustainable electric vehicle business ecosystems, SN Business & Economics, 3(8), 143.
Milić P., Marinković D., Klinge S., Ćojbašić Ž., 2023, Reissner-Mindlin based isogeometric finite element formulation for piezoelectric active laminated shells, Tehnicki Vjesnik, 30(2), pp. 416-425.
Refbacks
- There are currently no refbacks.
ISSN: 0354-2025 (Print)
ISSN: 2335-0164 (Online)
COBISS.SR-ID 98732551
ZDB-ID: 2766459-4