ADHESION BETWEEN A POWER-LAW INDENTER AND A THIN LAYER COATED ON A RIGID SUBSTRATE

Antonio Papangelo

DOI Number
10.22190/FUME180102008P
First page
19
Last page
28

Abstract


In the present paper we investigate indentation of a power-law axisymmetric rigid probe in adhesive contact with a "thin layer" laying on a rigid foundation for both frictionless unbounded and bounded compressible cases. The investigation relies on the "thin layer" assumption proposed by Johnson, i.e. the layer thickness being much smaller than the radius of the contact area, and it makes use of the previous solutions proposed by Jaffar and Barber for the adhesiveless case. We give analytical predictions of the loading curves and provide indentation, load and contact radius at the pull-off. It is shown that the adhesive behavior is strongly affected by the indenter shape; nevertheless below a critical thickness of the layer (typically below 1 µm) the theoretical strength of the material is reached. This is in contrast with the Hertzian case, which has been shown to be insensitive to the layer thickness. Two cases are investigated, namely, the case of a free layer and the case of a compressible confined layer, the latter being more "efficient", as, due to Poisson effects, the same detachment force is reached with a smaller contact area. It is suggested that high sensitive micro-/nanoindentation tests may be performed using probes with different power law profiles for characterization of adhesive and elastic properties of micro-/nanolayers.

Keywords

Adhesion, Layer, JKR model, Adhesion Enhancement

Full Text:

PDF

References


Pastewka, L., Robbins, M. O., 2014, Contact between rough surfaces and a criterion for macroscopic adhesion. Proceedings of the National Academy of Sciences, 111(9), pp. 3298-3303.

Ciavarella, M., Papangelo, A., 2018, A generalized Johnson parameter for pull-off decay in the adhesion of rough surfaces, Physical Mesomechanics, 21(1), pp. 67-75.

Ciavarella, M., Papangelo, A., 2018, A modified form of Pastewka--Robbins criterion for adhesion, The Journal of Adhesion, 94(2), pp. 155-165.

Ciavarella, M., Papangelo, A, 2017, A random process asperity model for adhesion between rough surfaces, Journal of Adhesion Science and Technology, 31(22), pp. 2445-2467.

Huber, G, Gorb, S, Hosoda, N, Spolenak, R, Arzt, E., 2007, Influence of surface roughness on gecko adhesion, Acta Biomater., 3, pp. 607-610.

Pugno, N.M., Lepore. E., 2008, Observation of optimal gecko's adhesion on nanorough surfaces. Biosystems, 94, pp. 218-222.

Gao, H., Yao, H., 2004, Shape insensitive optimal adhesion of nanoscale fibrillar structures, Proceedings of the National Academy of Sciences of the United States of America, 101(21), pp. 7851-7856.

Yao, H., Gao, H., 2006, Optimal shapes for adhesive binding between two elastic bodies, Journal of colloid and interface science, 298(2), pp. 564-572.

Papangelo, A., Afferrante, L., Ciavarella, M., 2017, A note on the pull-off force for a pattern of contacts distributed over a halfspace, Meccanica, 52(11-12), pp. 2865-2871.

Akerboom, S., Appel, J., Labonte, D., Federle, W., Sprakel, J., Kamperman, M.., 2015, Enhanced adhesion of bioinspired nanopatterned elastomers via colloidal surface assembly, Journal of The Royal Society Interface, 12(102), doi:10.1098/rsif.2014.1061.

Papangelo, A., Ciavarella, M., 2017, A Maugis-Dugdale cohesive solution for adhesion of a surface with a dimple, Journal of The Royal Society Interface, 14(127), doi: 10.1098/rsif.2016.0996.

Papangelo, A., Ciavarella, M., 2018, Adhesion of surfaces with wavy roughness and a shallow depression, Mechanics of Materials, 118, pp. 11-16.

Yang, F., 2002, Adhesive contact between a rigid axisymmetric indenter and an incompressible elastic thin film, Journal of Physics D: Applied Physics, 35(20), pp. 2614-2620.

Yang, F., 2006, Asymptotic solution to axisymmetric indentation of a compressible elastic thin film, Thin Solid Films, 515(4), pp. 2274-2283.

Reedy, E.D., 2006, Thin-coating contact mechanics with adhesion, Journal of Materials Research, 21(10), pp. 2660-2668.

Johnson, K.L., Kendall, K., Roberts. A.D., 1971, Surface energy and the contact of elastic solids, Proc Royal Soc London A, 324(1558), doi: 10.1098/rspa.1971.0141.

Popov, V.L., Heß, M., 2015, Method of dimensionality reduction in contact mechanics and friction, Springer, Berlin Heidelberg.

Argatov, I.I., Mishuris, G.S., Popov, V.L., 2016, Asymptotic modelling of the JKR adhesion contact for a thin elastic layer, The Quarterly Journal of Mechanics and Applied Mathematics, 69(2), pp. 161-179.

Johnson, K.L., 1985, Contact Mechanics, Cambridge University Press, Cambridge.

Jaffar, M. J., 1989, Asymptotic behaviour of thin elastic layers bonded and unbonded to a rigid foundation, Int. J.Mech. Sci. 31(3), pp. 229-235.

Barber, J.R., 1990, Contact problems for the thin elastic layer, International Journal of Mechanical Sciences, 32(2), pp. 129-132.

Argatov, I., Li, Q., Pohrt, R., Popov, V.L., 2016, Johnson–Kendall–Roberts adhesive contact for a toroidal indenter, Proc. R. Soc. A 472: 20160218.

Willert, E., Li, Q., Popov, V.L., 2016, The JKR-adhesive normal contact problem of axisymmetric rigid punches with a flat annular shape or concave profiles, Facta Universitatis-Series Mechanical Engineering, 14(3), pp. 281-292.

Popov, V.L., Heß, M., Willert, E., 2017, Handbuch der Kontaktmechanik: Exakte Lösungen axialsymmetrischer Kontaktprobleme, Springer, Berlin, 341 p.

Ciavarella, M., 2017, An approximate JKR solution for a general contact, including rough contacts, arXiv preprint arXiv:1712.05844.

Popov, V.L., Pohrt, R., Li, Q., 2017, Strength of adhesive contacts: Influence of contact geometry and material gradients, Friction, 5(3), pp. 308–325.

Sridhar, I., Johnson, K.L., Fleck, N.A., 1997, Adhesion mechanics of the surface force apparatus, Journal of Physics D: Applied Physics, 30(12), pp. 1710–1719.




DOI: https://doi.org/10.22190/FUME180102008P

Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4