DETERMINATION OF FRICTION HEAT GENERATION IN WHEEL-RAIL CONTACT USING FEM

Aleksandar Miltenović, Milan Banić, Dušan Stamenković, Miloš Milošević, Miša Tomić

DOI Number
-
First page
99
Last page
108

Abstract


The modeling of the friction heat generation has become increasingly important in product design process including areas such as electronics, automotive, aerospace, railway (e. g. wheel and rail rolling contact, braking systems, and so on), medical industries, etc. Determination of generated friction heat in the contact of wheel and rail is important for understanding the damage mechanisms on these two bodies such as wear. This paper presents a method to determine the friction generated heat in contact of wheel and rail during normal operation using transient structural-thermal analysis in ANSYS software.

Full Text:

PDF

References


Ertz M., Knothe K., 2002, A comparison of analytical and numerical methods for the calculation of temperatures in wheel/rail contact, Wear, 253, pp. 498–508.

Lyu Y., Zhu Y., Olofsson U., 2015, Wear between wheel and rail: A pin-on-disc study of environmental conditions and iron oxides, Wear, 328-329, pp. 277–285.

Gallardo-Hernandez E.A., Lewis R., Dwyer-Joyce R.S., 2006, Temperature in a twin-disc wheel/rail contact simulation, Tribology International, 39(12), pp. 1653–1663.

Wu L., Wen Z., Li W., Jin X., 2011, Thermo-elastic–plastic finite element analysis of wheel/rail sliding contact, Wear, 271(1–2), pp. 437–443.

Tomeoka M., Kabea N., Tanimoto M., Miyauchi E., Nakata M., 2002, Friction control between wheel and rail by means of on-board lubrication, Wear, 253, pp. 124–129.

Areiza Y.A, Garcés S.I., Santa J.F., Vargas G., Toro A., 2015, Field measurement of coefficient of friction in rails using a hand-pushed tribometer, Tribology International, 82(B), pp. 274-279.

Vukić M., Vučković G., Živković P., Stevanović Ž., Tomić M., 2013, 3D numerical simulations of the thermal processes in the shell and tube heat exchanger, Facta Universitatis, Series Mechanical Engineering, 11(2), pp. 169-180.

Milošević M., Stamenković D., Milojević A., Tomić M., 2012, Modeling Thermal Effects in Braking Systems of Railway Vehicles, Thermal Science, 16(2), pp. 515-526.

Miltenović A., Banić M., Stamenković D., Milošević M., Tomić M., 2014, Determination of Friction Heat Generation in Contact of Wheel-Rail Set using FEM, Proc. XVI International Scientific-expert Conference on Railway Railcon‘1+-4, Niš, pp. 21-24.

BS EN 13674-1:2011, 2011, Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and above, BSi, England.

UIC CODE 510-2, 2004, Trailing stock: wheels and wheelsets. Conditions concerning the use of wheels of various diameters, Union Internationale Des Chemins De Fer, France.

Mijajlović M., 2013, Numerical simulation of the material flow influence upon heat generation during friction stir welding, Facta Universitatis, Series Mechanical Engineering, 11(1), pp. 19-28.

Miltenović V., Banić M., Miltenović A., 2013, Prediction of Heat Generation in Meshing of Crossed Helical Gears, Proc. 5th International Conference on Gears, Munich, Germany pp. 586-597.

Arias-Cuevas O., Li Z., Lewis R., Gallardo-Hernandez E.A., 2008, Rolling–sliding laboratory tests of friction modifiers in leaf contaminated wheel–rail contacts, Proc. STLE/ASME International Joint Tribology Conference IJTC 2008, Miami, Florida, USA.


Refbacks

  • There are currently no refbacks.


ISSN: 0354-2025 (Print)

ISSN: 2335-0164 (Online)

COBISS.SR-ID 98732551

ZDB-ID: 2766459-4