Andrija Zorić, Marina Trajković-Milenković, Dragan Zlatkov, Žarko Petrović, Todor Vacev

DOI Number
First page
Last page


Application of seismic isolation devices is an efficient way for designing seismically resistant structures. For that purpose, various types of seismic isolation devices are developed. The main differences between them are in the materials used for their production and in the way they provide horizontal flexibility. Dynamic analysis of a base isolated structure requires an adequate mathematical model of the seismic isolation devices which can describe their mechanical properties in horizontal and vertical directions. The paper is considering analytical models used for the prediction of mechanical properties in the horizontal direction of lead-rubber bearings, which are proposed in the contemporary literature. Results obtained using these analytical formulas are compared with the results obtained by the finite element analysis model developed in this paper, as well as with available test results provided by the manufacturer. Improvements of the existing analytical models are suggested in order to enable a better prediction of mechanical characteristics in the horizontal direction of lead-rubber bearings.


lead-rubber bearing, elastic stiffness, post-elastic stiffness, yield force, equivalent viscose damping ratio, finite element analysis

Full Text:



J. Touaillon, "Improvement in buildings", United States of America Patent No. 99,973, Feb. 15. 1870.

J. A. Calantarients, "Building construction to resist the action of earthquake", United States of America Patent No. 932,443, Aug. 31. 1909.

T. E. Saaed, G. Nikolakopoulos, J.-E. Jonasson and H. Hedlung, "A state-of-the-art review of structural control systems", J. Vib. Control, vol. 21, issue 5, pp. 919-937, 2015.

J. M. Kelly, "Aseismic base isolation: review and bibliography", Soil. Dyn. Earthq. Eng., vol. 5, issue 3, pp. 202-216, 1986.

F. Naeim and J. M. Kelly, Design of seismic isolated structures: from theory to practice, New York: John Wiley & Sons, 1999.

M. Higashino and S. Okamoto, Response Control and Seismic Isolation of Buildings, London: Taylor & Francis, 2006.

G. P. Warn and K. L. Ryan, "A Review of Seismic Isolation for Buildings: Historical Development and Research Needs", Buildings, vol. 2, issue 3, pp. 300-325, 2012.

W. H. Robinson and A. G. Tucker, "A Lead-Rubber Shear Damper", Bull. N. Z. Soc. Earthq. Eng., vol. 10, issue 3, pp. 151-153, 1977.

W. H. Robinson and A. G. Tucker, "Test results for lead-rubber bearings for WM. Clayton Building, Toe Toe Bridge and Waiotukupuna Bridge", Bull. N. Z. Soc. Earthq. Eng., vol. 14, issue 1, pp. 21-33, 1981.

W. H. Robinson, "Lead-Rubber Hysteretic Bearings Suitable for Protecting Structures during Earthquake", Earthq. Eng. Struct. Dyn., vol. 10, issue 4, pp. 593-604, 1982.

J. S. Hwang and J. M. Chiou, "An equivalent linear model of lead-rubber seismic isolation bearings", Eng. Struct., vol. 18, issue 7, pp. 528-536, 1996.

G. P. Warn and A. S. Whittaker, "A Study of the Coupled Horizontal-Vertical Behavior of Elastomeric and Lead-Rubber Seismic Isolation Bearings", Report No. MCEER-06-0011, University of Buffalo, New York, USA, 2006.

G. P. Warn, A. S. Whittaker and M. C. Constantinou, "Vertical Stiffness of Elastomeric and Lead-Rubber Seismic Isolation Bearings", J. Struct. Eng., vol. 133, issue 9, pp. 1227-1236, 2007.

S. Eem and D. Hahm, "Large strain nonlinear model of lead rubber bearings for beyond design basis earthquakes", Nucl. Eng. Technol., vol. 51, issue 2, pp. 600-606, 2019.

G.-H. Koo, T.-M. Shin and S.-J. Ma, "Shaking Table Tests of Lead Inserted Small-Sized Laminated Rubber Bearing for Nuclear Component Seismic Isolation", Appl. Sci., vol. 11, issue 10, pp. 1-17, 2021.

Y.-f. Wu, H. Wang, A.-q. Li, D.-m. Feng, B. Sha and Y.-p. Yhang, "Explicit finite element analysis and experimental verification of a sliding lead rubber bearing", J. Zhejiang Univ. Sci. A, vol. 18, issue 5, pp. 363-376, 2017.

M. Saedniya and S. B. Talaeitaba, "Numerical modeling of elastomeric seismic isolators for determining force-displacement curve from cyclic loading", Int. J. Adv. Struct. Eng., vol. 11, issue 3, pp. 361-376, 2019.

M. Trajković-Milenković, O. T. Bruhns and A. Zorić, "On instability of constitutive models for isotropic elastic-perfectly plastic material behaviour at finite deformations", J. Mech. Eng. Sci., vol. 235, issue 20, pp. 4692-4703, 2021.

A. Khaloo, A. Maghsoudi-Barmi and M. E. Moeini, "Numerical parametric investigation of hysteretic behavior of steel-reinforced elastomeric bearings under large shear deformation", Structures, vol. 26, pp. 456-470, 2020.

Y.-S. Choun, J. Park and I.-K. Choi, "Effects of Mechanical Property Variability in Lead Rubber Bearings on the Response of Seismic Isolation System for Different Ground Motions", Nucl. Eng. Technol., vol. 46, issue 5, pp. 605-618, 2014.

V.-T. Nguyen and X.-D. Nguyen, "Seismic response of multi-story building isolated by Lead-Rubber Bearings considering effects of the vertical stiffness and buckling behaviors", VII International Scientific Conference: Integration, Partnership and Innovation in Construction Science and Education, IOP Conference Series: Material Science and Engineering, Tashkent, Uzbekistan, 2020.

S.-H. Ju, C.-C. Yuantien and W.-K. Hsieh, "Study of Lead Rubber Bearing for Vibration Reduction in High-Tech Factories", Appl. Sci., vol. 10, issue 4, pp. 1-17, 2020.

A. Zorić, D. Zlatkov, M. Trajković-Milenković, T. Vacev and Ž. Petrović, "Analysis of seismic response of an RC frame structure with lead rubber bearings", Proceedings of 15th International Scientific Conference: Planing, Design, Construction and Renewal in the Civil Engineering iNDis 2021, University of Novi Sad, Faculty of Technical Sciences, Department of Civil Engineering and Geodesy, Novi Sad, Serbia, pp. 109-118, November 2021.

A. Hammed, M.-S. Koo, T.D. Do and J.-H. Jeong, "Effect of Lead Rubber Bearing Characteristics on the Response of Seismic-isolated Bridges", KSCE J. Civ. Eng., vol. 12, issue 3, pp. 187-196, 2008.

N. Shaban and A. Caner, "Shake table tests of a different seismic isolation systems on a large scale structure subjected to low to moderate earthquakes", J. Traffic Transp. Eng., vol. 5, issue 6, pp. 480-490, 2018.

T. K. Datta, Seismic Analysis of Structures, Singapore: John Wiley & Sons (Asia) Pte Ltd, 2010.

J. S. Hwang and L. H. Sheng, "Equivalent elastic seismic analysis of base-isolated bridges with lead-rubber bearings", Eng. Struct., vol. 16, issue 3, pp. 201-209, 1994.

M. L. Marsh, I. G. Buckle, E. Jr. Kavazanjian, LRFD Seismic Analysis and Design of Bridges Reference Manual, Publication No. FHWA-NHI-15-004, U.S. Department of Transportation Federal Highway Administration, Washington D.C., 2014.

Dynamic Isolation Systems,, accessed 10 February 2022.

T. Zhou, Y.-F. Wu and A.-Q. Li, "Numerical Study on the Ultimate Behavior of Elastomeric Bearings under Combined Compression and Shear", KSCE J. Civ. Eng., vol. 22, issue 9, pp. 3556-3566, 2018.

Ansys Software documentation. ANSYS Inc., Canonsburg, PA. 2012.

H. Altenbach, A. Bolchoun and V. P. Kolupaev, "Phenomenological Yield and Failure Criteria", in Plasticity of Pressure-Sensitive Materials, H. Altenbach and A. Öchsner, Eds. Berlin, Heidelberg: Springer, 2014, pp 49-152.


  • There are currently no refbacks.

ISSN 0354-4605 (Print)
ISSN 2406-0860 (Online)
COBISS.SR-ID 98807559